Does the Toyota C-HR have heated mirrors?

What to Do If the Driving License Is Lost?

Here are the solutions after losing the driving license: 1. Report to the Vehicle Management Office. The office will arrange for the owner to first write a loss statement, clearly explaining the situation. 2. After completing the loss statement, the owner should take their ID card, photos, and the driving license application form to the Vehicle Management Office or Traffic Police Brigade. Upon successful review, the office will reissue a new driving license for the owner. 3. Owners in a different location can also apply for a replacement in that location. Here are the precautions after losing the driving license: 1. During the period of replacing the new driving license, the owner cannot drive on the road. 3. Even if the driving license is being replaced, as long as the new license has not been issued, it is considered driving without a license. 4. If the owner is unable to handle the replacement personally, they can ask a friend to do it on their behalf, but the procedures will be more complicated.

7

3

Share

What to Do When the Car Battery Keeps Dying?

Here are the steps to solve the problem of a dead car battery: 1. Park the rescue vehicle and the disabled vehicle facing each other, ensuring no contact between the two vehicles and that the jumper cables are long enough. 2. Connect the positive jumper cable to the positive terminals of both car batteries. 3. Connect one end of the negative jumper cable to the negative terminal of the rescue vehicle's battery. 4. Attach the other end of the negative clamp to the chassis, frame, or any unpainted, non-oxidized metal part of the disabled vehicle. 5. Finally, remove the jumper cables in the reverse order of connection. Here are the reasons why the car battery keeps dying: 1. The car has been parked for a long time, causing the battery to discharge. 2. The battery has reached the end of its service life. 3. Insufficient battery electrolyte or leakage. 4. A blown fuse causing the battery to discharge.

19

0

Share

Where to Handle Vehicle Violations?

Go to the local vehicle management office for inquiries. Traffic violation points can be processed at the vehicle management office or traffic police station under the jurisdiction of the vehicle. Where to handle vehicle violations: 1. Pay in person: Since penalty methods vary by location, it's best to bring the original or copies of your driver's license and vehicle registration certificate when visiting in person, and follow the instructions from the vehicle management department at the violation location. This is currently the most "primitive" method, being time-consuming and labor-intensive. 2. Ask a friend to handle it: If you have friends in the area where the violation occurred, you can ask them to help. Remember to send the original or copies of the violation notice, driver's license, vehicle registration certificate, ID card, etc., to your friend to save round-trip time. Note that some provincial and municipal traffic management departments do not accept third-party handling and still require the driver to handle it in person. So, be sure to check before asking a friend to avoid a wasted trip. 3. Process through the online vehicle management office: After logging into the online vehicle management office interface, find the "Traffic Violation" option under "Online Services" on the left, click to see traffic violation inquiries, confirmations, and fines. There is a "Vehicle Violation Inquiry" option that can check vehicles not registered with the online vehicle management office. Just enter the vehicle engine number (last four digits) and vehicle identification code (last six digits) to find the latest vehicle violation information. 4. Pay via postal service: After the introduction of postal service for handling out-of-town traffic violation fines, vehicle owners can pay fines without leaving home, saving time. However, postal service can only handle fine records; if your out-of-town violation involves points deduction, you must visit the local area in person to handle it.

14

0

Share

How to Determine if the Igniter is Faulty?

Methods to determine if the igniter is faulty are as follows: 1. First, remove the spark plug for inspection. Normally, the spark plug gap should be between 0.5 to 0.7mm. You can use the thickness of a small hacksaw blade to check the gap; it should feel slightly stuck when inserted. 2. After confirming that the spark plug is functioning properly, attach the high-voltage cap and ground the outer electrode of the spark plug to the engine body. Turn on the power switch and rotate the engine to see if the spark plug sparks. If there is no spark or the spark is weak, it can be concluded that the ignition system is indeed faulty. Below are the steps to handle a faulty igniter: 1. After confirming a circuit fault, first check if there is AC voltage at the output end of the igniter charging coil. If there is no voltage output, it can be determined that the charging winding is faulty, and the magneto must be disassembled to inspect or replace the charging winding. 2. Place the high-voltage wire directly about 5mm away from the engine body. Then, rotate the engine. If the high-voltage wire sparks strongly and produces a sound, the high-voltage wire is intact, and the issue lies with the high-voltage cap.

3

4

Share

What Causes the Thud When Shifting to Reverse in an Automatic Transmission?

There are several reasons for the thud when shifting to reverse in an automatic transmission: 1. Electronic linkage between the brake system and the automatic transmission: If the clutch is not fully depressed when shifting gears, it can cause gear damage; additionally, when not using the clutch, the foot should not rest on it, as this can lead to excessive wear of the release bearing. 2. Shifting at idle: If the gear is shifted from neutral to reverse before the engine speed has stabilized, it can cause strong shock vibrations in the transmission, potentially damaging the shift switch inside. 3. No synchronizer in reverse gear: The synchronizer is a device inside the transmission that ensures smooth gear engagement when shifting. Some cars lack a synchronizer, making it harder to shift gears smoothly. 4. Shifting before the car has come to a complete stop: If the car is shifted into P (Park) before it has fully stopped, the P gear lock hook inside the transmission can hit the gear, producing a thud. This operation can wear or even break the lock hook, and in severe cases, may lead to transmission failure.

15

0

Share

How to Switch Between D and S Gears?

D is the normal forward gear of the car, and S gear is the sport mode of the car. You can switch between D and S gears at any time. Here are the specific details: 1. D (Drive) is the forward gear, also known as the driving gear. In D gear, the car's transmission will be equivalent to gears 1 to 4, and it will automatically switch based on the vehicle's speed and throttle conditions. Most car owners generally use D gear for driving on ordinary roads. However, due to different designs of car models in various countries, the 'D' gear usually includes gears from 1 to high gear or 2 to high gear, and it will automatically shift based on changes in speed and load. By moving the lever to the 'D' position, the driver only needs to control the speed by mastering the accelerator pedal. 2. S stands for sport mode. In this gear, the transmission can shift freely, but the shifting timing will be delayed, keeping the engine at high RPM for a longer time to increase the vehicle's power. Of course, this will result in increased fuel consumption. Normally, D gear is used, and S gear is used when you want to experience instant acceleration and other sporty feelings. You can switch directly between them.

9

1

Share

Does the Toyota C-HR have heated mirrors?

What to Do If the Driving License Is Lost?

What to Do When the Car Battery Keeps Dying?

Where to Handle Vehicle Violations?

How to Determine if the Igniter is Faulty?

What Causes the Thud When Shifting to Reverse in an Automatic Transmission?

How to Switch Between D and S Gears?

What is the difference between Class I chassis and Class II chassis?

Are Cars Afraid of Sun Exposure in Summer?

What is the meaning of Panamera?

What Causes the Continuous Beeping of the Parking Sensor?