Does the Touareg belong to FAW-Volkswagen or SAIC Volkswagen?

1 Answers
VonGabriel
07/30/25 9:38am
The Touareg does not belong to FAW-Volkswagen or SAIC Volkswagen; it is a product of Volkswagen AG in Germany. It is a mid-to-large-sized SUV. Taking the 2020 Touareg as an example, its body dimensions are: length 4878mm, width 1984mm, height 1686mm, with a wheelbase of 2899mm and a fuel tank capacity of 90 liters. The 2020 Touareg features multi-link independent suspension both in the front and rear. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 245 PS, maximum power of 180 kW, and maximum torque of 370 Nm, paired with an 8-speed automatic transmission.
Was this review help?
20
4
Share
More Forum Discussions

Can a car be restored to factory settings?

Car can be restored to factory settings. Here are the relevant details: 1. Factory settings: This means restoring to the default state when the car left the factory. For example, the start interface, standby mode, operation shortcuts, timer reminders and other functions will be restored, and saved parameter settings will be cleared. 2. During factory reset: Audio-video settings such as voice volume, display resolution, screen sensitivity, voice type, etc. will all be restored to factory settings. At this time, users need to reconfigure personal settings according to their usage habits. In addition, settings related to the navigation system's hardware and software, such as input methods, navigation map loading paths, memory card paths, map versions, operating system versions, etc., as well as later upgrade sections, will return to the original factory state, requiring subsequent reconfiguration and upgrades.
2
1
Share

What is the best oil for turbocharged engines?

Turbocharged engines perform better with full synthetic oil. Below is a related introduction to engine oil: 1. There are three types of engine oil used in cars: mineral oil, semi-synthetic oil, and full synthetic oil. These three types of oil have different effects and varying usage cycles. 2. Under normal circumstances, the usage cycle for mineral oil is 5,000 kilometers, for semi-synthetic oil is 6,500 kilometers, and for full synthetic oil is 10,000 kilometers. 3. If the car uses a naturally aspirated engine, it is recommended to use mineral oil or semi-synthetic oil. If it uses a turbocharged engine, full synthetic oil is recommended. Compared to the other two types of oil, full synthetic oil offers better performance.
10
5
Share

Can the Mondeo use 95-octane gasoline?

The Mondeo can use 95-octane gasoline, but it is recommended to use 92-octane gasoline. There is no need to use 95-octane gasoline, as it does not provide additional protection for the engine or better performance. The recommended fuel type should follow the manufacturer's guidelines. Additional information: 1. The Mondeo is a mid-size sedan produced by Ford Motor Company. Its dimensions are 4873mm in length, 1852mm in width, and 1470mm in height, with a wheelbase of 2850mm. 2. In terms of power, the Mondeo is equipped with two turbocharged direct-injection engines: a 1.5GTDI and a 2.0GTDI.
1
2
Share

What are the reasons for a pickup truck's brakes being hard to press and unresponsive?

This is a normal phenomenon because it is the function of the brake booster. The vacuum booster obtains its vacuum power source from the engine intake pipe and stores it in the vacuum tank. Therefore, after the engine is turned off, pressing the brake pedal a few times will result in this phenomenon. If the vacuum booster is found to be ineffective during use, it should be inspected. Below are methods for maintaining the brakes: (1) Brake pad replacement: The wear condition of the brake pads determines the performance of the brakes. Generally, brake pads should be inspected every 10,000 kilometers and replaced every 30,000 kilometers. (2) Brake fluid replacement: Besides brake pads, brake fluid is also important. The replacement cycle for brake fluid is around 50,000 kilometers, but the specific replacement interval should be adjusted based on the local climate. If the area is particularly humid or rainy, the replacement cycle should be appropriately shortened. (3) Regular brake adjustment: After prolonged use, due to the vehicle's stress distribution, the brakes may pull to one side—sometimes to the left and sometimes to the right. It is essential to promptly visit a repair shop for adjustment. (4) Brake usage: Develop good driving habits and proper brake-pressing techniques. If the area is mountainous or hilly, avoid frequent brake usage due to the terrain and road conditions. Overuse can cause the brake pads to overheat, leading to a loss of braking performance.
8
1
Share

Is There a Significant Impact After Replacing the Radiator Support?

If the radiator support is connected to the body frame with screws and can be detached, then replacing the radiator support will have minimal impact. However, if the radiator support is integrated with the body frame, replacing it will have certain effects. Below are the relevant details: 1. The radiator support is a part of the vehicle's front that is prone to issues and is also the most common collision area. There are three types of radiator support materials available on the market: plastic, iron, or alloy. Structurally, they can be divided into integrated and split types. The integrated type is the most common form on the market, and in some places, the radiator support is also called a 'dragon gate frame.' The split type is generally divided into three sections, connected by bolts or welding points. 2. Most cars use water-cooled engines, which rely on the continuous circulation of coolant to dissipate heat. Water-cooled engines have a radiator at the front of the vehicle, which is fixed to the radiator support. The radiator support on most vehicles can be detached. If the radiator support is integrated with the body frame, replacing it would classify the vehicle as a 'salvage' or 'accident' car. For vehicles where the radiator support is integrated with the body, replacing it requires cutting off the old support and welding a new one in place, ensuring the body frame remains intact.
20
0
Share

How Long Must a New Driver Wait Before Driving on the Highway?

New drivers can drive on the highway as soon as they obtain their driver's license, but they must be accompanied by an experienced driver with at least three years of driving experience. Otherwise, they must wait until the one-year probationary period is over. Below are the restrictions for new drivers: 1. During the probationary period, motor vehicle drivers are not allowed to drive buses, commercial passenger vehicles, fire trucks, ambulances, engineering rescue vehicles, or vehicles transporting hazardous materials. Additionally, they cannot tow trailers. 2. When driving a small automatic transmission passenger vehicle designed for disabled individuals, the new driver may be accompanied by a driver who holds a license for small automatic transmission passenger vehicles or higher. 3. During the probationary period after obtaining an additional driving license category, the above restrictions do not apply when driving a vehicle within the original license category.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.