Does the Tiguan have four-wheel drive?

Why does the reverse gear radar keep beeping when there are no obstacles?

Generally, there are several possible reasons: dirty reverse radar sensors; a short circuit in the reverse radar alarm; or a malfunction in the reverse radar sensors or controller. Below are the relevant explanations: 1. Blind spots: The reverse radar is a warning device designed to avoid rear obstacles and prevent collisions. For many drivers, the reverse radar can indeed provide some assistance during reversing. However, reverse radars installed in some mid- to low-end cars, especially those given as freebies by dealers, often have certain blind spots in their detection range. 2. Installation position: Due to the placement of the radar probes, the reverse radar may fail when obstacles behind the car are too low, too high, or at an angle beyond the probe's detection range. For example, low obstacles like sidewalk curbs or large rocks, or high obstacles like tall box trucks, may fall outside the reverse radar's detection range. Additionally, the reverse radar is ineffective against very thin obstacles. It's also important to be aware of obstacles above the rear of the car, as overhead obstacles are not within the reverse radar's 'jurisdiction.'

2

3

Share

What category does automotive urea belong to?

Automotive urea solution falls under the catalyst classification in the tax classification code. Introduction to Automotive Urea: The SCR (Selective Catalytic Reduction) solution holds significant advantages in the National IV diesel vehicle exhaust emission treatment system, and automotive urea is an essential additive for the SCR solution. With the gradual implementation of the National IV emission standards for diesel vehicles in various cities, the demand for automotive urea may experience a surge. Current Development Status: The SCR system includes a urea tank (containing diesel exhaust fluid) and an SCR catalytic reaction tank. The operation process of the SCR system is as follows: when nitrogen oxides are detected in the exhaust pipe, the urea tank automatically sprays diesel exhaust fluid. The diesel exhaust fluid and nitrogen oxides undergo a redox reaction in the SCR catalytic reaction tank, producing non-polluting nitrogen and water vapor that are then discharged.

2

4

Share

How to deal with water dripping from the exhaust pipe of Volkswagen Polo?

When water drips from the exhaust pipe of Volkswagen Polo, the water in the exhaust pipe should be drained in time. The following is the analysis of the reasons for water dripping from the exhaust pipe of Volkswagen Polo: After gasoline is completely burned, water vapor and carbon dioxide are generated. Water vapor is colorless and transparent at high temperatures, but when the temperature is below 100 degrees, water vapor will condense into water. If the condensed water droplets are very small and suspended in the air, the water vapor will appear as white gas. When the ambient temperature is low, the white smoke from the exhaust pipe is water vapor. The condensed water vapor gathers together and turns into water droplets, which will be discharged automatically with the exhaust pipe.

4

2

Share

Is It Effective to Mix Half Water with Antifreeze?

Mixing half water with antifreeze is effective, but adding water to antifreeze will weaken its functionality. Water can produce scale under high temperatures, which may lead to corrosion or clogging. Below are the relevant details: 1. The role of antifreeze: The full name of antifreeze should be antifreeze coolant, meaning it is a coolant with antifreeze properties. Antifreeze prevents the coolant from freezing and expanding in cold winter conditions, which could otherwise crack the radiator or damage the engine cylinder block or head. 2. Usage: Antifreeze is mainly used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year. Over 95% of antifreeze is glycol-based water coolant. Glycol is most notable for its antifreeze properties, with a high boiling point, low volatility, moderate viscosity that changes little with temperature, and good thermal stability.

18

1

Share

What is the replacement interval for antifreeze?

Antifreeze should be replaced every 2 years or 40,000 to 60,000 kilometers. Prolonged failure to replace it will degrade the quality of the antifreeze, reducing its anti-corrosion properties and potentially damaging the radiator and pipes. The functions of antifreeze are: 1. To provide freeze protection for the engine in low-temperature environments; 2. To prevent the coolant from freezing and cracking the radiator or damaging the engine block and cylinder head during cold winter parking; 3. To offer efficient heat dissipation. The steps for replacing antifreeze are: 1. Open the car hood after the engine has cooled down; 2. Remove the antifreeze reservoir cap; 3. Lift the vehicle and open the radiator drain plug to release the old antifreeze, then reinstall the drain plug; 4. Lower the vehicle and pour new antifreeze into the reservoir.

7

0

Share

What are the specifications for automotive binding tape?

Automotive binding tape specifications: 25mm x 15m. Automotive wiring harness adhesive tape: Specially designed for wire harness wrapping in the automotive industry. Made with superior base materials, it is a high-quality synthetic rubber-based cloth tape with strong adhesive force and excellent aging resistance. Features strong surface stain resistance and high-temperature stability. Classification of automotive wiring harness adhesive tapes: Velvet-based tape: High-quality rubber-based strong adhesive velvet tape with excellent aging resistance; Cotton cloth-based tape: Specifically designed for wire harness wrapping in the automotive industry. Due to its extremely superior base material, it offers strong surface stain resistance and high-temperature stability, making it an ideal choice for wire harness tapes in vehicle interior areas; Fiber cloth tape (wear-resistant): Specifically designed for wire harness wrapping in the automotive industry. Thanks to its extremely superior base material, it provides strong surface stain resistance and high-temperature stability.

9

3

Share

Does the Tiguan have four-wheel drive?

Why does the reverse gear radar keep beeping when there are no obstacles?

What category does automotive urea belong to?

How to deal with water dripping from the exhaust pipe of Volkswagen Polo?

Is It Effective to Mix Half Water with Antifreeze?

What is the replacement interval for antifreeze?

What are the specifications for automotive binding tape?

What does the break-in period of a car mean?

What is the reason for not being able to shift into first gear?

Can a Lost Vehicle Certificate of Conformity Be Replaced?

Can Tubeless Tires Have Inner Tubes Added?