Does the Tiguan 30th Anniversary Edition have a particulate filter?

2 Answers
RichardLee
09/01/25 3:57am
The Volkswagen Tiguan 30th Anniversary Edition is equipped with a particulate filter. The particulate filter can reduce the particles in the engine exhaust emissions, recycle them, reduce vehicle exhaust emissions, enhance the environmental friendliness of the vehicle, and minimize atmospheric pollution. To check whether your vehicle has a particulate filter, you can use the following three methods: Check the Owner's Maintenance Manual and the Owner's User Manual to see if the particulate filter function is mentioned. Additionally, carefully review the fault codes in the manual to see if there is a "Particulate Filter" warning light indicator. Check the label on the oil filler cap. If the cap clearly states 0W-20 grade oil, it indicates that the vehicle is equipped with a particulate filter. Inspect the exhaust pipe behind the three-way catalytic converter to see if there is an additional cylindrical section. If present, that is the particulate filter. Location of the particulate filter: The particulate filter is located behind the three-way catalytic converter and in front of the muffler, surrounded by the front and rear oxygen sensors.
Was this review help?
6
3
Share
VonNova
09/13/25 6:46am
I believe the Tiguan 30th Anniversary Edition is indeed equipped with a particulate filter, as it's a standard configuration added by Volkswagen to meet China's Phase 6 emission standards, especially for gasoline vehicles sold in China. The GPF (Gasoline Particulate Filter) is designed to capture microscopic particles emitted by the engine to reduce pollution, and it's now standard on most new models. While driving, I've noticed that prolonged low-speed urban driving tends to clog the GPF. When this happens, the system automatically initiates a regeneration process by increasing engine RPM to burn off accumulated deposits. However, occasional highway driving helps maintain its efficiency. Maintenance shouldn't be neglected either – during regular servicing, have technicians check the sensor status. After all, this anniversary edition comes with special trim features, making it both eco-friendly and reassuring to drive.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What is the 0-100km/h acceleration time of the Volvo XC60?

Volvo XC60 T5 model achieves 0-100km/h acceleration in 7.05 seconds. Definition of 0-100km/h acceleration: 0-100km/h acceleration refers to the time taken for a vehicle to accelerate from 0 to 100km/h, which is the most intuitive reflection of a car's power. Generally, 1.6L compact cars achieve 0-100km/h acceleration in 11 to 13 seconds, 2.0T mid-size sedans in 7 to 8 seconds, while supercars mostly achieve it in less than 3.8 seconds. Factors affecting test results: Manufacturers usually indicate the official 0-100km/h acceleration time in the vehicle's promotional materials, but actual test results may differ from the official figures. Different environmental temperatures, road conditions, vehicle wear conditions, and even the amount of remaining fuel in the tank can affect the test results, so there are no two identical acceleration test results.
2
1
Share

Why does the Mercedes-Benz still not move when shifted to D gear?

There are several reasons why a Mercedes-Benz may not move when shifted to D gear, including insufficient transmission fluid or low internal oil pressure, incorrect gear switch signals, or issues with the shift solenoid valve wiring or the solenoid valve itself. Below are the specific causes and solutions for a Mercedes-Benz not moving when shifted to D gear: Internal transmission issues: Problems with the internal transmission actuators. Shifting gears allows the car to drive at a very low stable speed, which is difficult to achieve with the minimum stable speed of the internal combustion engine alone. The reverse gear in the transmission enables the car to move backward, while the neutral gear allows the engine to be separated from the drivetrain for extended periods during engine startup, parking, and coasting. Other malfunction indicator lights staying on: It is necessary to take the car to a 4S shop or repair shop to inspect the relevant modules and components. If only the engine malfunction indicator light stays on, try restarting the engine and observe whether the light remains on. If the engine malfunction indicator light turns off, there is no issue. If it stays on, the engine-related components and modules need to be inspected at a 4S shop or repair shop.
19
5
Share

What Causes a Volvo to Trigger an Alarm?

Volvo triggering an alarm may be due to a malfunction in the vehicle's alarm system. It requires a visit to a repair shop or a 4S store, where specialized computer equipment is needed to reset it. Other reasons for a Volvo triggering an alarm are as follows: Anti-theft system related hardware failure: Hardware failures in components associated with the anti-theft system, such as the electronic anti-theft control unit, anti-theft system wiring harness, or alarm horn, can trigger a warning on the dashboard indicating that the anti-theft system requires repair. These warnings typically appear during startup. False alarm: False alarms from the SCS safety system usually disappear immediately after restarting the vehicle. In such cases, no action is necessary, or the SCS safety software can be refreshed. Refreshing the safety software is free during the 4S store warranty period. Even after the warranty expires, it can often be refreshed for free upon negotiation.
19
1
Share

What is the actual fuel consumption of the Haima S7?

Haima S7 measured fuel consumption: 11.20L/100km. The specific fuel consumption may vary depending on the vehicle condition, driving habits of the owner, etc. Method for calculating fuel consumption: By resetting the mileage data recorded on the vehicle dashboard, the onboard computer automatically calculates the vehicle's fuel consumption based on the recorded mileage and fuel consumption data. Definition of constant-speed fuel consumption: Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. During road tests, standards such as test conditions, test methods, and test road selection specified in the national standards must be followed. Test conditions include: the load of the test vehicle, the accuracy of the test instruments, fuel, tire selection, ambient temperature, humidity, air pressure, wind speed, etc.
11
4
Share

What is the tire size of the Wuling Capgemini?

The tire size of the Capgemini is 225/55r18, where 225 represents the tire width of 225mm, 55 represents the aspect ratio of 55%, r stands for radial tire, and 18 indicates the wheel size of 18 inches. Capgemini tire brand: This model uses Atlas tires. These tires offer excellent noise reduction, comfort, smoothness, and outstanding high-speed driving stability, making them very suitable for family use. Capgemini tire maintenance: Tires are the main components that support the vehicle's weight and are in direct contact with the ground, making their maintenance essential. It is necessary to regularly clean stones from the tire treads, check tire pressure periodically, and observe the wear condition of the tire surface to replace tires in time. Avoid driving on poor road conditions.
4
4
Share

Why is the car lower on the left side and higher on the right side?

Possible reasons for the left side of the car body being lower are as follows: 1. Uneven tire pressure or uneven load on both sides of the vehicle: If the difference between the left and right sides of the car body is not significant, it may be caused by uneven tire pressure or uneven load distribution on both sides of the vehicle. 2. Issues with suspension components: If the difference is more severe, it may be due to problems with suspension components such as shock absorbers. 3. Shock absorber oil leakage: If the left side is lower, it may be due to oil leakage in the shock absorber. Methods to address the left-lower-right-higher issue: 1. Left-right imbalance caused by aging shock absorbers: In this case, it is best to replace the shock absorbers entirely. If the shock absorbers are relatively new, you can try replacing the shock absorber oil seals to prevent oil leakage. 2. Left-right imbalance caused by uneven tire pressure: This is the easiest to resolve. Simply check if the air pressure in all four tires is the same, then inflate the underinflated tire to restore normal balance. 3. Level difference caused by wheel rim deformation: Wheel rims may deform when subjected to significant impacts, which can affect the vehicle's balance. This issue can be resolved by repairing the deformed wheel rim or replacing it.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.