Does the Tiggo 8 Kunpeng Edition have four-wheel drive?

Can the Battery Be Charged at Idle Speed?

Yes, the car battery can be charged at idle speed. Charging at idle does not harm the car, and it actually produces less carbon buildup compared to frequent acceleration. Whether the car is in motion or idling, the battery will automatically charge. This is because the engine directly drives the alternator via a belt. Once the engine starts, the electricity generated by the alternator is rectified and voltage-regulated before being directly supplied to the car battery for charging. If the battery is severely depleted and unable to start the engine, a jump-start may be required. When charging the battery, the input current is not necessarily equal to the alternator's output current. The charging method varies depending on the battery's charge level and voltage condition. The car battery (or storage battery) is most vulnerable to depletion. There is an alternator located near the car engine, which is driven by the engine's belt to generate electricity. While the engine supplies power to other electrical components in the car, it also charges the battery, ensuring a continuous source of electrical energy.

13

2

Share

Why is there no power in the Chery QQ radio circuit?

If the Chery QQ radio is not receiving power, it means the radio's fuse has blown. Here is the relevant information: 1. If there is no power in the Chery QQ radio circuit, it is recommended to check the circuit connections. There might be a poor contact issue, such as with the plug or fuse. Additionally, the fuse might have blown due to uncertain factors in the circuit that need to be eliminated. Simply replacing the fuse may not completely solve the problem, as the fuse in this position might blow again. The blowing of a fuse is a warning signal. 2. Incorrect connection of the battery or alternator; insulation failure; incorrect placement of tools, etc., can all lead to a short circuit. Sometimes, the failure of a component in the circuit may manifest as an increase in resistance, causing the normal operation of the back-end circuit to increase the current, thereby blowing the fuse.

15

0

Share

What is the correct position to adjust the car's rearview mirrors?

Car rearview mirrors should be adjusted to the following correct positions: 1. The left rearview mirror of the car should be adjusted to a position where the front and rear door handles of the vehicle and the wheel arch of the rear wheel are visible. 2. The right rearview mirror should be adjusted to the same position. 3. The interior rearview mirror should be kept in the middle of the rear window. Here is some relevant information about car rearview mirrors: 1. Car rearview mirrors are located on the left and right sides of the front of the car and inside the car. They reflect the situation behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, thereby expanding the driver's field of vision. 2. Car rearview mirrors are important safety components. Their mirrors, shape, and operation are all carefully designed, and there are corresponding industry standards for their quality and installation, which should not be taken lightly.

1

5

Share

What is the function of cruise control system?

Cruise control system (CRUISE-CONTROL-SYSTEM), abbreviated as CCS, also known as cruise control device, speed control system, or autonomous driving system, mainly has the functions of cruise control, electronic fuel saving, throttle acceleration, speed limit setting, and brake failure alarm. The following is a related introduction to the cruise control system: 1. The cruise control system reads the pulse signal from the speed sensor and compares it with the set speed, then issues commands to mechanically adjust the throttle opening via the servo to increase or decrease, ensuring the vehicle always maintains the set speed. 2. The electronic multifunctional cruise control system eliminates the mechanical control part of the cable-type cruise control, adopting precise electronic control entirely, making the control more accurate and avoiding the risk of mechanical failure.

2

0

Share

How High Is the Fuel Consumption of the Big 7?

The official fuel consumption of the Luxgen Big 7 is 8.7L per 100 kilometers. The fuel tank capacity of the Luxgen Big 7 is 75L. When fully fueled, it can travel a distance of 75/8.7*100=862km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. The specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline for combustion. Heavier cars also have higher fuel consumption due to the need for greater driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during a cold start, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

16

4

Share

What Causes Windshield Resonance?

Reasons for windshield resonance: 1. Loose rubber seals around the glass. 2. High-temperature fatigue aging of the engine mount rubber. 3. Engine misfire. 4. Deformed or improperly installed engine guard plate. 5. Malfunction in the idle control system. 6. Debris in the window glass guide rails. 7. Loose internal components of the dashboard. Solutions for windshield resonance are as follows: 1. Inspect and replace the rubber seals around the windshield. 2. Replace the engine mounts. 3. Adjust the connection points of the chassis crossmember. 4. Perform engine maintenance. 5. Apply sound insulation and vibration reduction to the engine front axle.

12

2

Share

Does the Tiggo 8 Kunpeng Edition have four-wheel drive?

Can the Battery Be Charged at Idle Speed?

Why is there no power in the Chery QQ radio circuit?

What is the correct position to adjust the car's rearview mirrors?

What is the function of cruise control system?

How High Is the Fuel Consumption of the Big 7?

What Causes Windshield Resonance?

What are the symptoms of an intake air leak?

How to identify run-flat tires?

How to Rotate Vehicle Tires?

Where is the car air conditioning installed?