Does the Tayron not have a trunk button?

What is the fuel tank capacity of the classic Sylphy?

The fuel tank capacity of the classic Sylphy is 50 liters, as officially announced. The classic Sylphy uses 92-octane gasoline, with a fuel consumption of 5.2-6.1L per 100 kilometers. A full tank can cover a distance of 820-962km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. The fuel level is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the calibrated volume. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe fill limit. There is additional space from the safe fill limit to the tank opening, which is reserved to allow for fuel expansion due to temperature increases without causing overflow. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.

16

5

Share

What is the fuel consumption of the Yixuan GS Black Warrior?

The comprehensive fuel consumption of the Yixuan GS Black Warrior is 5.8-6.7L/100km. The 2021 Yixuan GS Black Warrior currently has 9 models on sale: the 200T manual Zhui Xing version and 200T manual Zhui Feng version, with a comprehensive fuel consumption of 5.8L/100km; the 230T automatic Zhui Xing version, 230T automatic Zhui Guang version, 230T automatic Zhui Xing Warrior version, 230T automatic Zhui Yue version, 230T automatic Zhui Feng version, 230T automatic Zhui Yue Warrior version, and 230T automatic Zhui Yao Warrior version, with a comprehensive fuel consumption of 6.7L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.0-9.1L/100km. Specific factors affecting car fuel consumption are as follows: Car weight: Larger and heavier cars consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load), while an SUV model weighing about 1.5 tons has a fuel consumption of 8.5 liters. Different weights result in different fuel consumption. Air resistance: Higher air resistance increases fuel consumption during driving. Cars with better aerodynamics have lower air resistance, leading to lower fuel consumption. Economical RPM: During driving, the engine has a most economical torque output point. Maintaining the car's speed within this torque output point significantly reduces fuel consumption. Generally, small-displacement cars have an economical RPM at about 70 km/h, while large-displacement cars have it at about 100 km/h. Keeping within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption.

1

0

Share

What does it mean when the ramp fixed point is less than 50 centimeters?

Ramp fixed point less than 50 centimeters refers to the situation where the distance from the side line is less than fifty centimeters but more than thirty centimeters when parking at a fixed point on a ramp. In this case, 10 points will be deducted. When parking at a fixed point on a ramp, the distance from the side line should be less than or equal to thirty centimeters and the line should not be crossed. Upon hearing the instruction: Turn on the right turn signal, appropriately steer the steering wheel to the right, allowing the vehicle to move slowly and straight along the right side of the road, while paying attention to the distance between the vehicle body and the right side line. Approaching the target: When the vehicle is about 10 meters away from the parking pole, slowly, accurately, and steadily approach the positioning target. Determining the target: Use the parking pole and a certain point on the windshield (or engine cover) as the target. When it is visually confirmed that a certain point on the windshield aligns with the parking pole, meaning the vehicle's bumper aligns with the parking pole line, stop immediately.

12

1

Share

What is the photo size for a C1 driver's license?

C1 driver's license photos require a white background and are one inch in size. Below is relevant knowledge about the C1 driver's license. Definition of C1 Driver's License: The C1 driver's license is one type of motor vehicle driving license code. The permitted driving scope of a C1 driver's license includes small and micro passenger vehicles, as well as light and micro cargo vehicles; light, small, and micro special operation vehicles; small passenger vehicles with a seating capacity of 9 or fewer people. Passing Standards for the C1 Test: Below are the passing standards for each scoring segment. Traffic regulations and related knowledge (Subject 1) — written test, with a perfect score of 100, requires 90 or above to pass. Field driving (Subject 2) — on-site, actual vehicle. The minimum passing score is 80, and scores below 80 are failing. Road driving (Subject 3) — on the highway or simulated field, actual vehicle. The perfect score is 100, and a score of 90 or above is required to pass. Safe and civilized driving knowledge — written test, with questions mainly in the form of cases, images, animations, etc., including true/false, single-choice, and multiple-choice questions, totaling 50 questions, with a perfect score of 100, requiring 90 to pass.

6

4

Share

Do All New Cars Come with Plastic Film on the Exterior?

Typically, new cars have plastic film covering both the exterior and interior to prevent scratches. However, before delivery, the dealership will clean the vehicle, so the exterior film is usually removed. The interior protective covers are also generally taken off by the sales staff, which is part of the standard delivery process and nothing to be overly concerned about. Below are some methods for protecting your car's paint: 1. Waxing: Waxing can be done directly or after polishing. Direct waxing involves cleaning the car and applying wax directly to the clear coat on the paint surface. Polishing waxing requires using a polishing machine to polish the paint surface before applying wax, which can instantly make the car shine. 2. Glazing: Due to the composition of the glaze, it is not resistant to acid or alkaline cleaning and can be easily damaged. It usually lasts only 1 to 3 months, and glazing can harm the paint, requiring reapplication every two to three months. 3. Crystal Coating: Crystal coating is a hard protective layer specifically designed for car paint, seats, interior and exterior trim, glass, tires, and other key areas. It comes in fast-drying and slow-drying types, mainly determined by its primary components. 4. Film Application: Car coating is a highly effective protective measure that can brighten the paint surface while also providing multiple benefits such as resistance to acid and alkali, high temperature, strong waterproofing, oxidation resistance, and UV protection.

9

2

Share

What is the total loss standard for flood-damaged vehicles?

The standard for declaring a flood-damaged vehicle as a total loss is when the vehicle is completely destroyed and cannot be repaired, or the cost of repairs reaches or exceeds the actual value of the vehicle. Hazards of flood-damaged vehicles: They can cause damage to the electronic control systems inside the car. The mixed rainwater is highly corrosive and can affect the functionality of electrical components, especially in future use. Most cars are equipped with electronic control systems (e.g., engine ECU, ABS system, SRS system, GPS navigation, etc.). If water enters, it can cause short circuits in the ECU's internal IC circuit board and rust on connector terminals, gradually leading to corrosion of metal parts and poor circuit contact. In severe cases, it may even cause short circuits and burning. Interior components such as carpets and seats may deform, become rough, and develop odors due to prolonged soaking, leading to bacterial growth. Moisture in the wiring harness under the carpets can cause short circuits due to dampness. How to identify flood-damaged vehicles: After cleaning, it is not easy to identify a flood-damaged vehicle from its exterior appearance. Flood-damaged vehicles mainly undergo repairs for water-damaged components, rarely involving bodywork. For example, if the headlights or taillights are waterlogged, they are either replaced or drained. Similarly, water inside the car is removed, and soaked components are disassembled and dried or simply aired out. However, flood-damaged vehicles are relatively easy to distinguish because they often emit a musty smell even after thorough cleaning. The trunk is a key area—if there is significant rust, it likely indicates water damage.

2

3

Share

Does the Tayron not have a trunk button?

What is the fuel tank capacity of the classic Sylphy?

What is the fuel consumption of the Yixuan GS Black Warrior?

What does it mean when the ramp fixed point is less than 50 centimeters?

What is the photo size for a C1 driver's license?

Do All New Cars Come with Plastic Film on the Exterior?

What is the total loss standard for flood-damaged vehicles?

What are the models of Michelin run-flat tires?

What do V and W mean on tires?

What Causes Smoke from the Car Steering Wheel?

Can a Car Wrap Be Applied After Painting?