Does the steering gear need to be replaced if it's broken?

1 Answers
LaAustin
07/29/25 9:18pm
The steering gear must be replaced if it's damaged. The consequences of a damaged steering gear are as follows: 1. Lack of power assistance: It will make steering difficult, and the power steering will fail, meaning there is no power assistance; 2. Stiff movement: Steering will become very heavy, the steering gear may jam and prevent turning, and it may indirectly cause abnormal tire wear. Reasons for abnormal noise in the steering gear: 1. Power steering pump failure; 2. Lack of power steering fluid; 3. Leaking steering gear dust cover caused by air inside or dirty power steering fluid. Power steering systems are divided into: 1. Electric power steering; 2. Rack and pinion hydraulic power steering; 3. Electro-hydraulic power steering.
Was this review help?
10
4
Share
More Forum Discussions

Where is the headlight fuse located in a Mercedes-Benz C200?

The headlight fuse of the Mercedes-Benz C200 is located in the fuse box within the vehicle's engine compartment, specifically in a black square box at the rear of the left front headlight, which houses fuses and relays. Here are some important precautions regarding fuses: 1. Using fuses with incorrect specifications may cause fires or injuries. 2. Do not replace a fuse with one that exceeds the rated current, as this could lead to component burnout. 3. Never attempt to repair a damaged fuse. 4. Avoid using metal strips, paper clips, or similar metal objects as substitutes for fuses. 5. When installing high-power electrical devices, always ensure the current rating is appropriate and replace the corresponding fuse accordingly.
10
2
Share

Is there a distinction for wrong-way travel in non-motorized vehicle lanes?

Non-motorized vehicle lanes do distinguish wrong-way travel. Here is more information about non-motorized vehicle lanes: 1. Based on road conditions and traffic needs, roads are divided into motor vehicle lanes, non-motorized vehicle lanes, and sidewalks. Motor vehicles, non-motorized vehicles, and pedestrians should travel in their respective lanes. On roads without designated motor vehicle lanes, non-motorized vehicle lanes, and sidewalks, motor vehicles should travel in the middle of the road, while non-motorized vehicles and pedestrians should travel on both sides. 2. When driving non-motorized vehicles on the road, relevant traffic safety regulations should be followed. Non-motorized vehicles should travel within the non-motorized vehicle lanes; traveling in the wrong direction within non-motorized vehicle lanes is considered a violation.
6
2
Share

What are the body dimensions of the Renault Captur?

Renault Captur body dimensions are: length 4263 mm, width 1797 mm, height 1593 mm, with a wheelbase of 2638 mm, front track of 1562 mm, rear track of 1559 mm, fuel tank capacity of 50 liters, and luggage compartment volume of 351 liters. The Renault Captur is equipped with a 1.3T turbocharged engine, with a maximum power of 117 kW at 5500 rpm, maximum torque of 270 Nm at 1800 to 3500 rpm. It adopts a front-engine, front-wheel-drive layout, with MacPherson strut front suspension and torsion beam rear suspension.
16
1
Share

What causes the noise when releasing the car brake?

The reasons for noise when releasing the car brake are: 1. Releasing the brake too slowly causes the wheels to be held by the braking system; 2. The brake pads and discs are stuck together due to rust; 3. There are metal particles on the surface of the brake pads. Solutions for noise when releasing the brake are: 1. Release the brake quickly and decisively; 2. Apply butter or lubricant at the connection between the brake pads and calipers; 3. Replace the brake pads to prevent scratching the brake discs. Brake maintenance items include: 1. High-temperature protection for brake pads; 2. Lubrication maintenance for brake calipers; 3. Brake disc cleaning; 4. Brake fluid replacement; 5. Anti-rust lubrication for tire bolts, brake discs, and wheel contact surfaces.
19
0
Share

How to reset the tire pressure warning light on Jetour X70?

There is a storage compartment opposite the front passenger seat, inside which you'll find the tire pressure check switch. Start the vehicle to power on the central control screen, then click the button indicated by the red frame. Above the tire pressure monitoring switch button, there's a tire pressure monitoring icon. Locate the "Tire" option marked by the red frame on the central control screen and click to enter. Click the "SET" button marked by the red frame to proceed to the next setup step. Click the "Confirm" button marked by the red frame to advance to the next setup step. Select "Tire Pressure Monitoring Initialization" to clear the tire pressure warning light. Long-press the tire pressure monitoring button until the warning light on the instrument panel disappears.
18
0
Share

Where is the cigarette lighter fuse of Changan CS75?

Changan CS75 cigarette lighter fuse is located in the in-car fuse box, and the position of the cigarette lighter fuse can be found by checking the reference table on the back of the fuse box. Here is the relevant introduction: 1. Brief introduction: Changan CS75 is a compact SUV, positioned between CS55 and CS95. In the field of domestic brand SUVs, Changan CS75 can be considered a veteran, and its tough and masculine styling has long been deeply rooted in people's hearts. 2. Replacement precautions: To avoid damaging the car's electrical system, the ignition switch, car lights, and all electrical appliances in the car must be turned off before replacing the fuse, and the car key must be removed from the ignition switch. Using a fuse with a higher rated current may damage other components of the electrical system. The fuse box must be kept clean, and care must be taken to prevent moisture when opening it, as dirt and moisture may damage the electrical system.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.