Does the Southeast DX3 have daytime running lights?

1 Answers
DiKendra
07/29/25 8:18pm
The Southeast DX3 is equipped with daytime running lights. Here are the relevant details: 1. Automatic activation: The daytime running lights will automatically turn on after the vehicle is started, and will automatically turn off when the low beam or high beam lights are activated. 2. Reasonable brightness: The LED daytime running lights provide sufficient brightness during the day, but their brightness is not excessively high to avoid affecting other vehicles on the road. 3. Enhanced visibility: Besides improving the vehicle's appearance, the primary function of daytime running lights is to enhance the vehicle's visibility, making it easier to be seen on the road, especially during cloudy weather, thereby effectively reducing the likelihood of accidents.
Was this review help?
14
0
Share
More Forum Discussions

Where can I check my motorcycle test results?

Prepare your motorcycle driver's license, original ID card, and your file number in advance. The file number can be obtained by inquiring at the vehicle management office. Bring the relevant documents to the local vehicle management office or test center and find the relevant personnel to handle the matter.
7
5
Share

What to Do If the Windshield Leaks Water into the Cabin?

The tools needed to fix the leak include glass adhesive, pry cards, rags, and clean water. Remove the wiper arms and ventilation cover, clean the debris and dirt at the joint with clean water and a rag, blow it dry with an air gun, and then apply glass adhesive to the joint.
9
3
Share

How to reset the tire pressure warning on a Mercedes-Benz C200L?

Drive slowly, park and turn off the engine, wait for 1-2 minutes, then restart the vehicle. After the vehicle stabilizes, check the tire pressure value displayed on the dashboard. Drive the car slowly to an auto repair shop or car care center to adjust the tire pressure, and the warning will be removed.
2
5
Share

How to Set Up Automatic Window Roll-Up When Locking the Wildlander

Step on the car's brake pedal and press the vehicle's one-touch start button. The car dashboard will light up, and the entire vehicle's power will be activated. Pull the driver's window switch and hold it without releasing until the driver's door window reaches the highest point, then continue holding the switch for 10 seconds to complete the setup.
5
5
Share

What to do about traffic violations caused by road construction?

Make a copy of the vehicle license and fill out a review application on the back. Fill in the vehicle number, violation time, violation location, review reason, applicant, contact information, and application time. A ruling will be made within five days after receiving the appeal.
20
4
Share

How to check the oil level in an Audi Q5 without a dipstick?

Locate and press the hood release switch, then manually open the hood. Find the position of the oil dipstick. Pull the yellow ring outward until it is fully extended. You will notice two notches at the very tip of the dipstick. Wipe the dipstick clean, reinsert it, and pull it out again. The section of the dipstick coated with oil indicates the oil level.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.