···
Log in / Register

Does the second chance in Subject 2 require starting over completely?

3 Answers
LaMary
09/01/25 5:40am
Subject 2 second chance requires starting over completely. The specific content of Subject 2 is as follows: 1. Teaching objectives: Master the basic driving operation essentials, possess the basic ability to control the vehicle, proficiently master the basic methods of driving on the site and internal roads, have the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route. 2. Examination content: The usual items are: reversing into the garage, parallel parking, starting on a slope, turning at a right angle, and driving on a curve.
Was this review help?
12
3
Share
HarperLynn
09/13/25 8:22am
For the second attempt in Subject 2, candidates usually don't have to restart all test items from scratch. The examiner typically allows the candidate to continue from the failed section for the retest, which saves time and avoids completely negating previous efforts. For example, I remember failing the reverse parking test by crossing the line, and the examiner directly asked me to redo just the reverse parking item. Passing the retest allowed me to proceed to subsequent items like parallel parking. Mental adjustment is crucial—don't panic if you fail the first time; take a deep breath, calm down, and reflect on the mistakes. It's advisable to practice error-prone sections more before the test, especially details like clutch control and reversing reference points. Simulate test scenarios during practice to improve first-time success rates and avoid unnecessary retakes.
Was this review help?
16
5
Share
Expand All
DiMichael
10/28/25 2:21am
For the second retake of Subject 2, candidates are not required to redo the entire test. According to common regulations, the examiner will decide whether to retake only the failed section or the remaining parts based on the failure situation. This design is quite reasonable. For example, if you cross the line during parallel parking, you might only need to retake that specific part instead of starting the entire test from scratch. This saves time and allows you to focus on correcting mistakes. I believe it's important to maintain a stable mindset during the test, reflect immediately after a mistake, and improve your actions. It's recommended to strengthen basic skill practice before the test, such as coordinating the clutch and throttle during hill starts. Don't worry about failing once—many people pass on retakes. The key is to practice more on the sections where mistakes commonly occur.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

What is the wading depth of the Vezel?

The ideal wading depth of the Vezel is 73cm, with a safe wading depth around 60cm. It is not recommended to exceed 65cm. When the water depth reaches one-third of the tire height, you can pass through with confidence as long as you operate correctly, avoiding unnecessary damage. When the water depth exceeds half of the tire height, caution is required as this may lead to water entering the vehicle. If the wading depth surpasses the bumper, remain vigilant while driving to prevent water from entering the engine. There are three scenarios of waterlogged vehicles: water covering the exhaust pipe but not reaching half the wheel height, water just reaching half the wheel height, and water exceeding half the wheel height. Generally, water reaching half the wheel height can affect the vehicle. Below are the details: 1. Water covering the exhaust pipe: If water only covers the exhaust pipe, promptly move the vehicle away. Water covering the exhaust pipe will not be sucked back into the engine, and engine stalling is mainly due to water entering the engine's intake system, unrelated to the exhaust pipe being submerged. 2. Water just reaching half the wheel height: If water just reaches half the wheel height, the vehicle usually won't leak. However, if submerged for a long time with aging seals, leakage may occur. In such cases, drive the vehicle to a 4S shop, dismantle the interior, clean, and dry it. 3. Water exceeding half the wheel height: If water exceeds half the wheel height, the engine may take in water, and the interior may leak. Do not start the engine to avoid damage to the engine or electronic components. If the vehicle is waterlogged and starting causes damage, insurance will not cover the repairs.
19
1
Share

What is the Ford Mondeo?

Ford Mondeo is a mid-size sedan sold by Ford Motor Company in multiple markets worldwide. Below is relevant information about the Mondeo: 1. Introduction: The Ford Mondeo is a mid-size sedan marketed by Ford Motor Company across various global markets. In 2017, Changan Ford launched the 2017 Ford New Mondeo. 2. Key Incident: Changan Ford Automobile Co., Ltd. decided to recall 344,872 units of certain New Mondeo vehicles produced between January 4, 2013 and October 11, 2016 starting from November 8, 2019. The recall was initiated due to potential safety hazards during airbag deployment. Changan Ford Automobile Co., Ltd. will replace the improved driver-side frontal airbag module free of charge for affected vehicles to eliminate safety risks.
7
0
Share

What causes the tire pressure warning in Toyota vehicles?

Toyota tire pressure warning is caused by abnormal tire pressure, unreset tire pressure monitoring, or damaged sensors. Abnormal tire pressure: The warning will trigger when the pressure is generally below 1.8bar or above 3.0bar. At this time, tire inspection and pressure adjustment are required. Unreset tire pressure monitoring: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the original data, causing the tire pressure monitoring indicator to light up. In this case, simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to come on. For sensor damage issues, only replacement with a new part is possible.
9
3
Share

Where is the Ford Transit fuse box located?

The cigarette lighter fuse is located on the lower left side of the steering column. Below is some relevant information about the Ford Transit: 1. Exterior: It features a classic European/American short-nose business van styling, combining bold appearance with refined details. Designers have used confident and friendly lines to give it a dignified yet approachable face. With aerodynamic principles and streamlined design, the Transit has a drag coefficient of only about 0.3, offering strong speed sensation while being fuel-efficient. 2. Interior: The Transit's interior design immediately impresses with its luxurious and aesthetically pleasing car-style dashboard that creates a strong sense of unity, making you feel like stepping into a luxury sedan. The vehicle adopts 95% of the SAE (Society of Automotive Engineers) standard for ergonomic design, and considerable effort has been made in layout design to maximize space.
20
4
Share

How to Solve the Issue of Kia Forte's Jerking During Acceleration and Battery Light Flashing?

Replacing the spark plugs can resolve the issue. Below is relevant information about the Kia Forte: 1. Exterior: The Forte commemorative edition retains the brand's signature tiger-nose grille design. The differences from the older model include a redesigned mirror-finish logo on the front grille, trunk lid, and steering wheel. Additionally, the new 10-spoke alloy wheels are applied to 1.6GLS and higher trims, adding a sporty touch. 2. Interior: For the interior design, the Forte commemorative edition 1.6Premium model introduces an all-new brown interior, creating a comfortable driving environment. The use of high-gloss coating on the steering wheel, gear shift lever, and chrome-plated interior door handles enhances the interior's premium feel.
14
5
Share

What Causes Ford Transmission Failure?

This vehicle's transmission cannot shift smoothly and even loses reverse gear due to a malfunction of the internal shift fork responsible for gear switching. Below is some knowledge about Ford: 1. Company Introduction: Ford Motor Company is one of the world's largest automobile enterprises. Founded in the early 20th century, Ford Motor Company, driven by the founder Henry Ford's dream of 'manufacturing cars affordable to everyone' and his exceptional vision, has weathered a century of challenges to become one of the world's top four automobile group companies. It also owns the world's largest automotive financial subsidiary—Ford Credit (Ford-Credit Financial) and the customer service brand Quality-Care. 2. Logo Origin: The Ford logo features the English word 'Ford' in white on a blue background. Because the founder Henry Ford loved small animals, the designer created the English word 'Ford' to resemble a little white rabbit.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.