Does the Roewe i5 high-end model come with a built-in dash cam?

How to Coordinate the Clutch, Brake, and Accelerator?

The coordination of the clutch, brake, and accelerator is as follows: 1. When the vehicle is driving at high speed, brake with the gear engaged. Since the engine provides sufficient braking power, the speed will decrease rapidly. If the clutch is pressed, it is equivalent to the vehicle being in neutral, which reduces braking efficiency and increases the braking distance. 2. The order of clutch and brake should depend on the speed. If the speed is high, press the brake first; if the speed is low, press the clutch first. If the speed is relatively fast, light braking is sufficient. If the speed is relatively slow, press the clutch first, then the brake, otherwise the engine will stall. 3. If there is a situation ahead that requires slowing down, first release the accelerator to let the speed decrease. If the speed is still fast, lightly press the brake without pressing the clutch to reduce the speed. As the obstacle gets closer and the speed is already very low, press the clutch and shift to a lower gear corresponding to the speed.

19

2

Share

What does it mean when u0101 loses communication with the transmission?

U0101 fault code refers to the loss of communication with the transmission control module. Details are as follows: 1. The U0101 fault code indicates a loss of communication with the Transmission Control Module (TCU), which could be due to CAN data line communication issues or faults in the ECU or TCM itself. 2. You can try restarting the vehicle. After restarting, the engine and transmission will attempt to communicate again. If there are no issues, you can drive the vehicle. 3. If the problem persists, you need to clear the fault code first. It must be cleared according to the fault code specified for the corresponding vehicle model. Do not attempt to clear it by disconnecting the negative terminal of the battery, as this may lead to more significant faults, causing the vehicle's control computer to lose historical records.

4

0

Share

How to Use the Car Air Conditioning?

Here is the correct way to use the car air conditioning: 1. Generally, the button on the left side of the car represents cold air in blue, warm air in red, and a moderate temperature in the middle. 2. To turn on the cold air, adjust the left button towards the blue area. For warm air, adjust it towards the red area and press the AC switch. The middle button controls the fan speed, and the one on the far right adjusts the mode, allowing you to direct airflow to the feet, hands, or windshield, or use a combination of modes. 3. It is best to turn on the internal circulation when using the cold air and the external circulation when using the warm air.

18

5

Share

How to Stay Awake While Driving?

Solutions for drowsy driving include: ensuring sleep quality, avoiding fatigue driving, keeping essential oils like mentholatum or cooling oil handy, and not using the internal air circulation for too long. Here are the details: 1. Ensure sleep quality: For example, driving on highways requires high energy levels, making quality sleep crucial. If you plan a long-distance trip the next day, ensure a good night's sleep. 2. Avoid fatigue driving: Try to avoid continuous driving for extended periods. Generally, after driving for more than 2 hours, consider taking a short break, even if it's just getting out of the car to walk around. If it's after lunch, a 15–30-minute nap is advisable. 3. Keep essential oils like mentholatum or cooling oil handy: These have refreshing effects. When feeling drowsy, applying a small amount to the temples, nose tip, or philtrum can quickly refresh the mind. However, this method is not long-lasting and is ideal for short drives. 4. Avoid prolonged use of internal air circulation: During hot noon hours, many prefer using internal circulation to cool the car quickly. However, prolonged use leads to stale air and oxygen deprivation. Thus, don’t keep the internal circulation on for too long; switch back to external circulation periodically. In summer, turn on the AC to prevent fogging, and in winter, turn it off. Also, avoid setting the temperature too high, as it can cause discomfort. It’s recommended to open the windows every half hour to refresh the air inside the car.

6

3

Share

What is the fuel consumption of the Hongqi HS5?

The comprehensive fuel consumption of the Hongqi HS5 is 7.7-8.2L/100km. Currently, there are 7 models of the Hongqi HS5 on sale. The ZhiLian QiLing, ZhiLian QiYue, ZhiLian QiXiang, and ZhiLian QiXiang LeGou versions have a comprehensive fuel consumption of 7.7L/100km. The ZhiLian QiXiang 4WD, ZhiLian QiLing 4WD, and ZhiLian QiXiang 4WD LeGou versions have a comprehensive fuel consumption of 8.2L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.5-9.8L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during a cold start, requiring more gasoline to burn, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

11

2

Share

What does the (P) on a car mean?

The meaning of P on a car is as follows: 1. P displayed on the dashboard: The symbol is a circle with a P in the middle, parentheses on both sides of the circle, and the entire symbol is red. It indicates the parking brake indicator, used to show whether the parking brake is engaged. 2. The P button on the car: It is the on/off switch for the parking sensors, which is turned on by default. If the driver feels that the parking sensor alerts are unnecessary, they can press this button to turn off the parking sensor function. 3. P on the gear shift: It is the abbreviation for 'parking,' representing the parking gear, mostly used when turning off the engine and parking the car.

16

1

Share

Does the Roewe i5 high-end model come with a built-in dash cam?

How to Coordinate the Clutch, Brake, and Accelerator?

What does it mean when u0101 loses communication with the transmission?

How to Use the Car Air Conditioning?

How to Stay Awake While Driving?

What is the fuel consumption of the Hongqi HS5?

What does the (P) on a car mean?

What are the maintenance items for a car?

What to Do When the Car Key Cannot Be Pulled Out?

What is the actual fuel consumption of the Ford Mondeo 2.3?

How to Check the Emission Standard of a Car?