Does the Power Module of the Prado Damage the Car?

2 Answers
SanXavier
09/02/25 4:04am
Prado's power module damages the car. The power module damages the car. The automotive engine control module refers to the core component of engine control, which controls the fuel injection and ignition timing of the engine based on input information from various sensors, and provides optimal control commands for other output devices. Extended information: Structure of the automotive engine control module: 1. Driver: Converts the microcontroller's control signals for the motor into driving signals for the power converter, and isolates power signals from control signals. 2. Power conversion module: The power conversion module controls the motor current. Power devices commonly used in electric vehicles include high-power transistors, gate turn-off thyristors, power field-effect transistors, insulated gate bipolar transistors, and intelligent power modules, among others.
Was this review help?
10
1
Share
LeJaxson
09/14/25 6:17am
I've been driving a Prado for many years. The power module, which essentially refers to the core components like the engine, is designed to be highly reliable by the factory. Normal driving won't harm the vehicle at all, as Toyota vehicles are known for their durability and toughness. However, if you modify it, such as installing a turbocharger or electronic control systems, it might lead to overloading, causing the engine to overheat or even shortening its lifespan. My advice is to stick to the manual for maintenance, change the oil regularly, and get it checked without unnecessary modifications. Remember, excessive pursuit of performance can be counterproductive. For daily commutes or off-roading, the Prado's power is very stable, so there's no need to worry too much. Proper maintenance is the key.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

What are the subjects of the motorcycle test?

Motorcycle tests consist of 3 subjects. The examination includes traffic regulations and related knowledge, site driving, and road driving (including safe and civilized driving). Below are details about the three subjects: Subject 1: Covers road traffic rules, traffic signals, handling of traffic safety violations and accidents, regulations on motor vehicle driver's license application and usage, motor vehicle registration, and other road traffic safety laws, regulations, and rules. Subject 2: Includes tests for three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles, featuring stake tests, hill-start and stopping, and single-plank bridge crossing. Subject 3: The safe and civilized driving knowledge test covers operational requirements for safe driving, knowledge of driving safely under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
3
5
Share

Which gear should an automatic car be in when going down a long slope?

An automatic car should be in L gear when going down a long slope, using the gear to control the speed and avoid prolonged braking, which causes unnecessary wear on the brake pads. More details are as follows: 1. The lower the gear, the greater the engine's traction. When the vehicle is kept in a low gear, the speed increases more slowly compared to being in a high gear. At this time, combined with the effect of the brakes, the braking effect is more obvious and safer. 2. Automatic transmissions use planetary gear mechanisms for shifting. They can automatically shift gears based on the degree of the accelerator pedal and changes in vehicle speed. The driver only needs to operate the accelerator pedal to control the speed. Generally, the following types of automatic transmissions are commonly used in cars: hydraulic automatic transmissions, hydrostatic automatic transmissions, electric automatic transmissions, stepped mechanical automatic transmissions, and continuously variable mechanical automatic transmissions. The most common is the hydraulic automatic transmission.
2
4
Share

What Causes the Noise in the Clutch Pedal?

Here are the reasons for the noise in the clutch pedal: Clutch pressure plate, release bearing: Broken or loose springs. Shattered clutch disc. Clutch: Broken release levers, excessive wear, or broken adjustment bolts for release levers. Below is an introduction to the function of the clutch: Engine and transmission: It allows gradual engagement between the engine and the transmission, ensuring smooth vehicle starts. Disconnection: It temporarily disconnects the engine from the transmission to facilitate gear shifting and reduce impact during shifting. Separation function: During emergency braking, it can separate to prevent overload in the transmission system, providing a certain level of protection.
2
1
Share

How to reset the maintenance reminder on Audi Q5?

Audi Q5 maintenance reminder reset method steps introduction: 1. Press the middle button among the three buttons on the lower right side of the odometer to reset the maintenance light. 2. Turn on the ignition, "SERVICE" will appear on the LCD display, then release the reset button. 3. Press the right button among the three buttons on the lower right side to reset the display. "SERVICE IN 10000 MI" will appear on the LCD display, then turn off the ignition. Below is a related introduction to the Audi Q5: 1. Appearance: It features 19-inch fan blade-style wheels, which compared to the 20-inch wheels of the gasoline version, are less luxurious and imposing but more technologically advanced. 2. Power: It is equipped with a 2.0T engine and an 8-speed automatic transmission.
1
2
Share

Can motorcycles be exposed to rain? What happens if they get wet?

It is best not to expose motorcycles to rain. However, getting a little wet is not a big issue, but it is advisable to have a rain cover ready to protect the important components. After getting wet, place the motorcycle in a ventilated area to dry, avoiding direct exposure to sunlight. This is because plastic and metal parts of motorcycles can easily age, discolor, and rust when exposed to sun and rain. Below are some motorcycle maintenance tips: Cleaning: Wash the motorcycle when it gets dirty or after being exposed to rain, as rainwater is acidic and highly corrosive to metal and plastic. After washing, apply a layer of wax to help resist acid rain and sun damage. Engine maintenance: At 6,000 kilometers on the odometer, which is during the normal riding phase when changing to the second bottle of semi-synthetic oil, add an anti-wear agent to extend the engine's lifespan and improve the motorcycle's performance.
10
1
Share

Is the Mobis 6AT Transmission Reliable?

Mobis 6AT transmission is reliable. Below is extended information about transmissions: Transmission functions: Changing gear ratios. While maintaining the engine's rotational direction, it enables the vehicle to reverse. Utilizing neutral gear, it interrupts power transmission, allowing the engine to start, idle, and facilitating gear shifts or power output. Manual transmission: Manual transmissions primarily consist of gears and shafts, achieving speed and torque variation through different gear combinations. Automatic transmission: Automatic transmissions are composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system. They achieve speed and torque variation through hydraulic power transmission and gear combinations.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.