Does the Porsche 718 have an exhaust sound?

1 Answers
JulianLynn
07/30/25 4:28am
Porsche 718 does not have an exhaust sound, and the exhaust system needs to be modified. The following are specific details about the Porsche 718: 1. Dimensions: The Porsche 718 has a length, width, and height of 4918mm, 1983mm, and 1673mm respectively, with a wheelbase of 2895mm, a minimum ground clearance of 215mm, a fuel tank capacity of 75 liters, a trunk capacity of 648 liters, and a curb weight of 2355kg. 2. Powertrain: The Porsche 718 uses a total of three engines, which are a 3.0-liter turbocharged engine, a 2.9-liter twin-turbocharged engine, and a 4.0-liter twin-turbocharged engine. The engines are equipped with hybrid injection technology and use aluminum alloy cylinder heads and cast iron cylinder blocks.
Was this review help?
13
1
Share
More Forum Discussions

How to resolve the P0234 trouble code?

"The P0234 trouble code indicates that the turbo/supercharger A is in an overboost condition. Possible causes include: 1. Misfire condition exceeding calibrated threshold; 2. Knock sensor circuit malfunction; 3. Low-speed fuel pump relay failure; 4. Transmission oil temperature exceeding normal range; 5. Turbocharger pressure regulator valve failure, etc. The solution for the P0234 trouble code is: After successfully troubleshooting the car's turbo/supercharger issue, proceed to clear the trouble code. When clearing, follow the specified trouble code clearing method for the vehicle model. Do not arbitrarily disconnect the car battery's negative ground cable to clear the trouble code.
14
3
Share

What is the break-in period for a car in kilometers?

The break-in period of a car refers to the initial driving phase of a new car or after a major overhaul, typically ranging from 1,000 to 1,500 kilometers. The break-in period of a new car has the following characteristics: 1. More driving malfunctions: Due to factors such as improper assembly of components, new cars tend to experience more driving malfunctions during the break-in period; 2. Higher fuel consumption: To ensure that the new car operates under a light load during the break-in period, carburetor cars are equipped with speed limiters, which can easily lead to an overly rich air-fuel mixture, thereby increasing fuel consumption; 3. Lubricating oil is prone to deterioration: During the break-in period, the rough surfaces of components and the small gaps between them cause the lubricating oil temperature to rise. Additionally, many metal particles are worn off and fall into the lubricating oil, making it more susceptible to oxidation and deterioration.
3
0
Share

What is the difference between Haojue and Haojue Suzuki?

Here is the introduction to the differences between Haojue and Haojue Suzuki: 1. The manufacturers of the two brands "Haojue" and "Haojue Suzuki" are different: Products under the "Haojue" brand are independently produced by Haojue Company, while products under the "Haojue Suzuki" brand are jointly produced by Haojue Company and Japan's Suzuki Company. The former is independently produced, while the latter is jointly produced. 2. The vehicles of the two brands "Haojue" and "Haojue Suzuki" are different: The main models under the Haojue Suzuki brand include Diamond Leopard, EN, GZ, GN, Neptune, Fuxing, Jin, Lan, Red Giant, etc., while the main models under the Haojue brand include HJ125-7 Silver Leopard, HJ125-8, HJ125-2, Yuexing, Shidai Star, etc. 3. The engines used in the two products are also different: There is a significant difference in engine technology between "Haojue" and "Haojue Suzuki". Taking underbone motorcycles as an example, the engines of domestic brand underbone motorcycles are basically imitations of Honda's underbone engine technology, and Haojue is no exception. However, the Haojue Suzuki underbone mainly uses the FW110, with its own engine system. Even for sport bikes, Haojue imitates Honda rather than Suzuki.
7
4
Share

What Are the Gears in an Electric Vehicle?

Basically, the essential gears (from top to bottom) are: P (Parking gear, equivalent to the traditional handbrake), R (Reverse gear), N (Neutral gear), and D (Drive gear). The specific gears may vary depending on the vehicle model. Below is a brief introduction to electric vehicles: 1. Introduction: An electric vehicle refers to a vehicle powered by an onboard power source, using an electric motor to drive the wheels, and complying with all road traffic and safety regulations. 2. Components: The electric drive and control system, mechanical systems such as the drivetrain, and working devices to accomplish set tasks. The electric drive and control system is the core of an electric vehicle and also the most significant difference from internal combustion engine vehicles.
8
5
Share

What is the difference between engine L and T?

Engine L and T differ in the following aspects: 1. Nature: A turbocharged (T) engine is equipped with a turbocharger. Naturally aspirated (L) is a type of car intake where air is forced into the combustion chamber by atmospheric pressure without any supercharger. 2. Principle: The earliest turbochargers were used in sports cars or Formula racing cars, allowing engines to achieve greater power in races where engine displacement is limited. Naturally aspirated engines lack a supercharger, with air simply passing through the air filter-throttle-intake manifold to reach the cylinder. 3. Performance: Turbocharged engines can deliver stronger power than naturally aspirated engines of the same displacement while being more fuel-efficient.
10
5
Share

Is the Mitsubishi Outlander fuel-consuming?

2.0L model is 7.4L/100Km, 2.4L model is 8.1L/100Km. Here is the relevant introduction to the fuel consumption of the Mitsubishi Outlander: 1. Mitsubishi Outlander 2.0L: The 2.0L Mitsubishi Outlander is a front-wheel-drive model, equipped with a simulated 6-speed CVT transmission. Its official comprehensive fuel consumption is 7.4L/100Km, while the actual fuel consumption is around 8.77L/100Km. 2. Mitsubishi Outlander 2.4L: The 2.4L Mitsubishi Outlander also features a simulated 6-speed CVT transmission. Its official comprehensive fuel consumption is 8.1L/100Km, with an actual average fuel consumption of 9.48L/100Km.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.