Does the Phideon's trunk sensor require additional setup?

What are the differences between aluminum alloy wheels and steel wheels?

Steel wheels and aluminum alloy wheels mainly have the following differences: 1. Appearance: Aluminum alloy has better fluidity and tension than steel wheels in a high-temperature liquid state. Subsequent polishing and electroplating processes allow for the creation of more aesthetically pleasing and varied shapes. Surface anti-corrosion treatment and electrostatic powder coating also keep them looking new for a long time. 2. Cost: Aluminum wheels are more expensive, while steel wheels are cheaper. Almost no cars still use steel wheels; most vehicles now use aluminum alloy wheels. 3. Weight: The specific gravity of aluminum alloy wheels is less than that of steel wheels, with each aluminum wheel being about two kilograms lighter on average than a steel wheel of the same size. Excluding the spare wheel, this can reduce the total weight by eight kilograms.

10

5

Share

What does a 2.0L displacement mean?

The 2.0L in a car refers to 2.0 liters, where the L stands for naturally aspirated, meaning the engine takes in air normally. The T indicates turbocharging, which forces air into the engine. Naturally aspirated is one method of air intake in cars, where air is drawn into the combustion chamber by atmospheric pressure without any supercharger. Naturally aspirated engines are far superior to turbocharged engines in terms of smooth power output and direct responsiveness. More details are as follows: 1. Displacement (Swept-volume) is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or expelled per stroke or cycle. Generally, a larger displacement means the engine releases more energy (converting chemical energy from fuel into mechanical energy) per unit time, resulting in better 'power performance.' This is why off-road vehicles and sports cars usually have relatively larger displacements. 2. The working volume that the piston moves from top dead center to bottom dead center is called the cylinder displacement; if the engine has multiple cylinders, the sum of all cylinder working volumes is called the engine displacement. It is usually expressed in liters (L). Engine displacement is one of the most important structural parameters, representing the size of the engine more accurately than bore and number of cylinders. Many engine indicators are closely related to displacement.

8

2

Share

How to Determine if an Oxygen Sensor is Faulty?

Cars with a faulty oxygen sensor exhibit the following symptoms: 1. It can lead to a reduction in the vehicle's power performance and a significant increase in fuel consumption. 2. It may cause rapid damage to the car's three-way catalytic converter, greatly reducing its service life. Below is some relevant information about automotive oxygen sensors: 1. The oxygen sensor is an essential component for the engine to reduce exhaust pollution. Once the air-fuel ratio of the mixture deviates from the theoretical value, the oxygen sensor detects the oxygen concentration in the exhaust and sends feedback to the ECU. This feedback controls the fuel injection amount of the injector, thereby maintaining the air-fuel ratio of the mixture within the normal range. 2. The oxygen sensor calculates the oxygen concentration based on chemical equilibrium to monitor the air-fuel ratio of the mixture. Therefore, if the oxygen sensor is faulty, it cannot monitor the vehicle's exhaust emission values. The core component of the oxygen sensor is a porous ZrO2 ceramic tube. At certain temperatures, high-concentration oxygen molecules inside the tube can be adsorbed to form electrons, creating a potential difference.

18

2

Share

Documents Required for Applying for a Beijing Entry Permit

Documents required for applying for a Beijing Entry Permit are as follows: 1. For vehicles applying for the first time, they must go to each Beijing entry inspection station or permit office to apply for a 7-day Beijing Entry Permit; 2. If the validity period expires and an extension is needed, within 3 days after using the valid Beijing Entry Permit for 5 days, they can go to the traffic branch or team to apply for a 5-day extension once; 3. For those who still need a Beijing Entry Permit after the 12-day period expires, they must go to the permit office to reapply for a 7-day Beijing Entry Permit. 4. After using the Beijing Entry Permit for 4 days, they can also go to any of the 25 Beijing entry inspection stations or permit offices in the city to reapply for a Beijing Entry Permit. The Beijing Entry Permit should be placed on the lower left side of the vehicle's front windshield. When applying for the Beijing Entry Permit for the first time, the following supporting documents must be submitted: 1. The driver's identity card and valid motor vehicle driving license; 2. The motor vehicle registration certificate; 3. Valid motor vehicle traffic accident liability compulsory insurance certificate; 4. Valid motor vehicle safety technical inspection qualification mark; 5. A certificate issued by the Beijing environmental protection authority confirming that the vehicle meets environmental protection requirements; 6. For vehicles transporting hazardous chemicals from other provinces, autonomous regions, or municipalities, they must also submit the hazardous goods transport qualification certificate issued by the local road transport management authority.

6

3

Share

What does a sawtooth lane mean?

Sawtooth lanes, also known as 'tidal flow lanes,' have been established in some cities. Roads with these lanes have special indicator lights, and driving is prohibited during non-operational hours. If mistakenly entered, drivers will be penalized with 3 demerit points and a fine ranging from 200 to 1000 yuan, which is quite severe. Additional information: 1. The name 'tidal flow lane' is symbolic, much like the ebb and flow of tides, as these lanes are specifically set up for peak traffic hours. During severe traffic congestion, tidal flow lanes can be activated. Special traffic signals are installed above the entrances to these lanes, and the types of signals vary from place to place. 2. The primary purpose of tidal flow lanes is to alleviate traffic pressure. During peak hours, vehicles that meet the requirements can use this 'dedicated lane' to avoid traffic jams. It's important to note that this lane is not like the traditional 'dashed-solid line lanes'; once entered, lane changes are not possible, so drivers should plan their routes in advance.

20

4

Share

What to Do When the Engine Emission Warning Light Comes On?

Here are the methods to handle when the engine emission warning light comes on: 1. Start and turn off the vehicle three times in a row, or disconnect the negative terminal of the engine battery, wait for 30 seconds, and then reconnect it. After performing the above steps, check if the engine warning light on the dashboard is still on. This method is only effective for false engine faults. 2. The illumination of the engine exhaust system warning light is mostly caused by damage to the oxygen sensor in the three-way catalytic system or poisoning of the three-way catalytic converter due to poor fuel quality in the country. If this light comes on while driving, immediately reduce speed and drive to the nearest service station for inspection. 3. If the warning light comes on and the vehicle cannot start after turning off, this is usually due to a fuel pump or ignition system failure. It is recommended to call for a tow truck directly. If the vehicle can still be driven but exhibits severe shaking, lack of acceleration power, and other symptoms, it is advisable to stop driving. This not only prevents further damage to the engine but also ensures the safety of the owner and others. Additional Information: Vehicles have warning lights, such as one resembling a faucet, commonly referred to as the engine fault light. This light usually comes on when the vehicle is powered on and goes off during actual startup. However, it may stay on due to vehicle issues. This light is commonly called the engine fault light, but it is actually the emission warning light. Normally, if this light does not go off, it means the vehicle's emissions exceed the standard and must be repaired.

2

Share

Does the Phideon's trunk sensor require additional setup?

What are the differences between aluminum alloy wheels and steel wheels?

What does a 2.0L displacement mean?

How to Determine if an Oxygen Sensor is Faulty?

Documents Required for Applying for a Beijing Entry Permit

What does a sawtooth lane mean?

What to Do When the Engine Emission Warning Light Comes On?

What is the meaning of the BMW logo?

Where is the mirror folding switch for BMW cars?

Can a punctured BMW run-flat tire be repaired?

How to Use BMW Paddle Shifters?