Does the owner need to go together when the 4S shop handles the license plate registration?

1 Answers
SanEva
07/29/25 11:14am
When the 4S shop handles the license plate registration, the owner does not need to go together, only the ID card needs to be provided. New car license plate registration needs to be processed at the local vehicle management office, and the required documents include ID card, vehicle certificate, vehicle parameter table, car invoice in duplicate and quadruplicate, vehicle purchase tax, compulsory traffic insurance, etc. The following are the precautions for vehicle license plate registration: Determine the type of license plate to be processed: After determining whether to process a local license plate or an out-of-town license plate, pay the purchase tax according to regulations. The vehicle purchase tax should be paid at the vehicle's registered location. If you choose a local license plate, the purchase tax must be paid locally; if you choose an out-of-town license plate, the purchase tax must be paid out of town. Fully understand relevant information: Before purchasing a new energy vehicle, you must determine whether a charging pile can be installed and understand relevant information. You must also understand important information such as the application process for special license plate quotas and financial subsidy standards.
Was this review help?
5
1
Share
More Forum Discussions

Can Halogen Car Lights Be Replaced with LED Lights?

Halogen lights cannot be replaced with LED lights, as this is illegal. Unauthorized modification of car lights can affect the vehicle's annual inspection and compromise safety. If you prefer LED lights, it is recommended to directly choose a higher trim model when purchasing a car. Below is more information about lights: 1. LEDs are compact, generate less heat, and are more energy-efficient. 2. The light-emitting principle of LEDs is more complex, as they emit light through the recombination of electrons and holes. 3. LEDs can efficiently convert electrical energy into light energy, resulting in lower heat generation and higher energy efficiency. 4. LED light beads can be manufactured into various shapes, enhancing the aesthetic appeal of car lights. 5. In terms of brightness and energy efficiency, LEDs outperform halogen lights, but cars equipped with LED light sources are more expensive.
4
0
Share

Where are the four rubber plug holes on the car chassis?

There is a small hole in the chassis of the car, approximately at the four jacking points for the tires, where the four rubber plug holes are located. Below is relevant information: Chassis drainage holes: There are many drainage holes in a vehicle, and the chassis is no exception. To open them, simply use a pry bar or your hand to remove the rubber plug and access the waterproof holes on the chassis. However, the drainage holes on the sides of the chassis are not meant to be left open permanently. Normally, they are sealed with rubber plugs to prevent water and road debris from entering the vehicle. If there is water accumulation inside the car or under the chassis, you can lift the vehicle and remove the rubber plugs to drain the water. Important note: During daily driving, try to avoid roads with deep water accumulation. Deep water not only risks water entering the chassis but may also lead to water seeping into the vehicle interior.
3
3
Share

What are the symptoms of a faulty exhaust valve in a car?

Damage to the exhaust valve can cause the engine to shake or even stall during idle. The characteristics of a faulty exhaust valve are as follows: 1. When the exhaust valve is damaged, it cannot control the amount of exhaust gas recirculation. Excessive exhaust gas participating in recirculation will affect the concentration of the air-fuel mixture, leading to difficulties in starting, engine shaking, unstable idle, weak acceleration, and other phenomena that impact engine performance. 2. The exhaust valve serves the function of separating oil and gas. When functioning normally, it only draws in exhaust gas and not oil. If the exhaust valve is damaged, it loses its oil-gas separation capability, potentially drawing in oil along with the air, allowing oil to enter the combustion chamber. This can result in oil burning and the emission of blue smoke.
16
2
Share

Does a Roof Wrap Affect Annual Vehicle Inspection?

Applying a wrap film to the roof of a motor vehicle does not affect the annual inspection, but the color must match the body color or be a pure black roof wrap. Below is more information about vehicle wraps: 1. It can provide certain protection to the original car paint, especially color-changing films that use imported adhesive, which offer excellent protection for the original paint. Even when removed, there will be no difficult-to-clean residue. 2. Unlike spray painting, it does not damage or thicken the original car paint, which is detrimental to the protection and use of the original paint. 3. If a color-changing film is applied to a new car, it can be removed by the 6th year when the vehicle undergoes its annual inspection, avoiding the hassle of repainting. 4. If the color-changing area exceeds 30% of the vehicle's surface, it is necessary to register the change with the vehicle management office or replace the vehicle license to avoid issues during traffic police inspections.
19
2
Share

What are the main types of regular car maintenance?

Here is an introduction to the contents of regular car maintenance: 1. Leaf springs: Inspect the suspension system leaf springs to ensure there are no fractures. 2. Clutch: Check the free travel of the clutch. 3. Cabin: Inspect the seats, handrails, sunroof, fire extinguisher, and service signs inside the cabin. 4. Lights: Check all lights, computer announcement systems, and rear door monitors. 5. Repairs: Verify if reported repair areas have been fixed. Below is extended information on daily car maintenance: 1. Cleaning: Clean the car's exterior and engine surface to maintain a neat appearance. 2. Inspection and replenishment: Check and replenish lubricants, fuel, coolant, brake fluid, various working fluids, and tire pressure in all parts of the car. 3. Ensure trip safety: Inspect and tighten safety components and positions such as brakes, steering, transmission, suspension, lights, signals, and the engine's operating condition to ensure safe travel.
18
5
Share

Will the fixed speed camera flash for speeding?

Fixed speed cameras will flash for speeding. Typically, the speed camera flashes twice to calculate the speeding violation. These speed cameras are usually installed on national highways, provincial roads, expressways, and other sections to capture speeding behaviors. Since they capture images from the front, a flash is used to fill in the light to clearly capture the driver's face. Generally, when a vehicle enters the camera's range, the flash will activate once. Below is how speed cameras work: 1. Distance sensor: The camera's flash has a distance sensor. When a vehicle enters the flash range, the light will activate. 2. Continuous shooting: The camera captures continuous footage. If a vehicle commits a violation, the system automatically selects the clearest image of the license plate and the frame that best proves the violation. 3. Automatic processing: The system captures the image, converts it into a photo, and uploads it to the traffic management department via wireless network—all done automatically by the computer.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.