Does the Old Tiida Have Bluetooth Functionality?

What to Do When the Transmission Overheats?

Here are the reasons and solutions for transmission overheating: High temperature reason one: The engine and water temperature are too high, affecting the heat dissipation of the transmission. Solution: Repair the engine. High temperature reason two: The radiator grille is clogged. Solution: Clean the radiator. High temperature reason three: The transmission clutch is slipping, generating additional heat. Solution: Repair the coupler. High temperature reason four: Insufficient flow in the transmission cooling oil circuit. Solution: Repair the valve body or replace the oil pump. High temperature reason five: The thermostat is stuck. Solution: Replace the thermostat.

16

4

Share

What noise does a damaged inner CV joint make?

Noises caused by a damaged inner CV joint include: 1. A clicking sound from the transmission area when accelerating or driving on uneven roads, often accompanied by CV joint grease leakage. 2. In cases of severe damage, abnormal noises may also occur when turning the vehicle. Most CV joint failures produce clicking sounds primarily during acceleration, with rare occurrences during coasting. There are two common types of CV joints used in passenger vehicles: fixed-type CV joints, which allow only rotational movement between shafts without axial displacement during torque transmission; and plunging-type CV joints, which permit both rotational movement and axial displacement between shafts during torque transmission.

13

3

Share

Why is the car air conditioner not heating?

The reasons why the car air conditioner is not heating are: 1. Poor operation of the heating control mechanism leading to insufficient warmth; 2. Issues with the engine cooling system causing inadequate heating. The car air conditioner is a ventilation device that adjusts and controls the temperature, humidity, air cleanliness, and airflow inside the vehicle cabin to an optimal state, providing a comfortable environment for passengers and creating good working conditions for the driver, playing a crucial role in ensuring safe driving. Methods for maintaining the air conditioner include: 1. Regularly cleaning the surfaces of the condenser and evaporator; 2. Paying attention to the operation of the compressor; 3. Closing the external circulation when there is a lot of dust in the air to reduce contamination of the air filter; 4. Regularly cleaning the air ducts and replacing the air filter to maintain fresh air inside the car.

1

5

Share

How to Turn Off the Daytime Running Lights on a Hyundai Elantra?

The method to turn off the daytime running lights on a Hyundai Elantra is: 1. Turn the steering wheel to the left without starting the car; 2. Turn the key to open the door, and upon hearing a ding sound, the daytime running lights will turn off. Taking the 2020 Hyundai Elantra as an example, its body dimensions are: length 4610 mm, width 1800 mm, height 1450 mm, wheelbase 2700 mm, and fuel tank capacity 53 liters. The 2020 Hyundai Elantra is equipped with a 1.5L naturally aspirated engine, producing a maximum horsepower of 115 hp, with a maximum power speed of 6300 rpm and a maximum torque speed of 4500 rpm. It features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.

6

5

Share

What engine does the Dongfeng Fengshen New AX7 have?

Dongfeng Fengshen New AX7 is equipped with a 1.6-liter turbocharged engine, which has a maximum power of 170 horsepower and a maximum torque of 250 N·m. It features direct injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 6AT transmission. The Dongfeng Fengshen AX7 is developed and manufactured by Dongfeng Fengshen, and it is a self-owned brand SUV model. In terms of body dimensions, the Dongfeng Fengshen AX7 has a length, width, and height of 4645mm, 1880mm, and 1690mm respectively, with a wheelbase of 2715mm. It uses MacPherson independent suspension at the front and double-wishbone independent suspension at the rear.

12

3

Share

Can vehicle annual inspection be done in a different location?

Vehicle annual inspection can be conducted in a different location. The process for vehicle annual inspection includes: 1. Exhaust emission test; 2. Check for traffic violations; 3. Pay a deposit; 4. Exterior inspection; 5. On-site testing; 6. Final review; 7. Pay fees and receive the inspection sticker. The purposes of vehicle annual inspection are: 1. To promptly eliminate potential safety hazards of the vehicle; 2. To encourage vehicle owners to enhance maintenance; 3. To reduce the occurrence of traffic accidents. Items that cannot pass the vehicle annual inspection include: 1. Various car covers and window tint films; 2. Prohibited items; 3. Modified front and rear bumpers. Vehicle annual inspection is a mandatory test for all vehicles that have obtained official license plates and registration certificates, conducted once a year to ensure the vehicle meets the safety technical requirements for motor vehicle operation.

20

1

Share

Does the Old Tiida Have Bluetooth Functionality?

What to Do When the Transmission Overheats?

What noise does a damaged inner CV joint make?

Why is the car air conditioner not heating?

How to Turn Off the Daytime Running Lights on a Hyundai Elantra?

What engine does the Dongfeng Fengshen New AX7 have?

Can vehicle annual inspection be done in a different location?

Why does the car shake violently while driving?

How Heavy is the Counterweight of a 200 Excavator?

Why Downshift for Overtaking?

How to Turn on the Fog Lights of the Volkswagen Tharu?