Does the Odyssey Hybrid not come with a spare tire?

2 Answers
McNaomi
07/28/25 9:01pm
Odyssey Hybrid does not come with a spare tire. Spare tires can be divided into: 1. Full-size spare tire: The specifications are the same as the other tires on the vehicle, and it can replace any temporarily or permanently unusable tire; 2. Non-full-size spare tire: Its diameter and width are slightly smaller than the other tires, and it can only be used as a temporary replacement for non-driving wheels, with a speed limit not exceeding 80 km/h. The body dimensions of the Odyssey are: length 4847 mm, width 1820 mm, height 1702 mm, wheelbase 2900 mm, fuel tank capacity 50 liters. It is equipped with a 2.0L naturally aspirated engine, with a maximum power of 107 kW and a maximum power speed of 6200 rpm, paired with an electronic continuously variable transmission.
Was this review help?
16
1
Share
LeCamilla
08/12/25 1:42am
I've been driving the Honda Odyssey Hybrid for a while and was quite surprised to find it doesn't come with a standard spare tire. Honda designed the hybrid version for space optimization and weight reduction, with the battery taking up space in the rear compartment, so they only provided an emergency kit including tire sealant and an air pump. Once during a long trip, I had a flat tire and quickly fixed it with these tools, which was very convenient. This trend is common in hybrid vehicles as it helps improve fuel efficiency. If you frequently drive on highways, I recommend carrying a portable air pump or purchasing a third-party tire repair kit to avoid being stranded in remote areas. Overall, the lack of a spare tire doesn't affect daily use, but being prepared in advance makes travel more reassuring.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

Is the Mazda Atenza Considered a Coupe?

Mazda Atenza is a coupe-style vehicle. Specific descriptions are as follows: Appearance of Mazda Atenza: The Atenza also adopts Mazda's design philosophy, featuring a front face with a very muscular engine compartment, with the hood pressed very low, giving it a coupe-like demeanor. It is highly personalized and a very cool coupe car. Features of Mazda Atenza: The Atenza is based on Mazda's spirit of breaking conventions and starting from scratch, developed and manufactured as a new generation flagship model of mid-to-high-end sports sedans. The Atenza has a body length, width, and height of 4870 mm, 1840 mm, and 1450 mm, respectively. In terms of appearance, the Atenza adopts Mazda's new Kodo design language, with a U-shaped face and LED headlights. The new model's headlight assembly includes LED daytime running lights.
10
2
Share

What are the reasons why the JAC iEV4 cannot be charged?

The reason why the car battery cannot be charged may be due to a damaged converter in the charger, which prevents conversion and charging. In this case, the charger resistor needs to be replaced. Alternatively, the charger fuse may be blown, requiring the charger to be replaced. Another possibility is that the power cord is detached or has poor contact at the battery socket, which should be checked and replaced. Below are some tips for car battery maintenance: 1. Avoid leaving the vehicle parked for long periods: The battery installed in the car will self-discharge over time when left idle. It is best to drive the car at least once a week for a minimum of 20 minutes to allow the battery to recharge while driving. 2. Close windows before turning off the engine: The power for the car's windows and sunroof comes from the battery. Therefore, it is advisable to close all windows before turning off the engine, rather than after, or even using the long-press lock button method to close the windows after leaving the car. 3. Keep the battery clean and tidy: Regular inspections are an effective way to extend the lifespan of the car battery. Use a professional battery electrode brush or an old toothbrush to clean dust and corrosion from the positive and negative terminals. Apply a layer of Vaseline or a fatty substance to the contact surfaces to form a protective film.
17
5
Share

What do pulling up and pulling down the handbrake in an automatic car mean?

In an automatic car, pulling up the handbrake stops the vehicle, while pulling it down starts the vehicle. Below are the precautions for using the handbrake and its functions: Precautions for using the handbrake: Avoid pulling the handbrake too tight to prevent system damage. Do not use the handbrake for parking on long-term slopes. Never pull the handbrake while driving at high speeds. Always release the handbrake before starting the car. Do not yank the handbrake abruptly, as this can cause long-term damage. The correct method is to pull the handbrake up gently and smoothly, listening for the distinct clicking sounds. When pulling the handbrake, the latch moves back and forth, with a spring inside applying force. To prolong the lifespan of the spring and latch, press the latch with the thumb pad while pulling the handbrake. The optimal working point for the handbrake is at 70% of its full pull. Functions of the handbrake: Pulling up the handbrake when parking keeps the vehicle stationary and prevents it from rolling downhill. During driving, pulling up the handbrake while turning can create a drifting effect. In emergencies, the handbrake can be used as a brake.
7
2
Share

What battery model is used for the Passat?

Different configurations of the Passat use different battery models. Below are the details: 1. Mid to low-end models are equipped with a VARTA 12V-280A-60AH battery. 2. High-end models are equipped with a VARTA 12V-380A-72AH battery. Here are some tips for battery maintenance: (1) Avoid parking the car in an open parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage. (2) In winter, the car engine may be harder to start. Each attempt to start the engine should not exceed 5 seconds, with intervals of at least 15 seconds between attempts. If the engine fails to start after multiple attempts, check other aspects such as the electrical circuit, ignition coil, or fuel system. Avoid continuous attempts to start, as this can lead to battery damage due to excessive discharge. (3) Regularly charge the car battery. A battery left unused will gradually discharge on its own and eventually become unusable. Therefore, start the car periodically to recharge the battery. (4) Clean the battery terminals periodically and apply specialized grease to protect the wiring harness. Regularly inspect the battery components and connecting wires. (5) Avoid using car electronics after the engine is turned off. Using the battery alone when the engine is not generating power can cause damage.
1
0
Share

What is the reason for the Crown reporting engine immobilizer failure?

Crown engine immobilizer system failure is a computer hardware issue. It is recommended to unplug the various detection points of the computer board and then conduct a test drive. The engine immobilizer system, commonly known as the engine electronic anti-theft system, is an anti-theft system installed for the engine. The ignition key of the car contains an electronic chip, each with a fixed ID. When the ID of the key chip matches the ID on the engine side, the car will start. If they do not match, the car will automatically cut off the circuit, preventing the engine from starting. Method to deactivate the Crown engine immobilizer system: Insert the ignition key into the ignition switch. The stop ECU command receiving coil emits electromagnetic energy, which is received by the capacitor in the electronic chip, converted into electrical energy, and temporarily stored. This is used to transmit the key coding signal. After receiving the coding signal from the key, the receiving coil amplifies it through an amplifier and transmits it to the stop ECU. The stop ECU compares it with the pre-stored identification code in the storage area. If they match, the stop ECU sends a signal to the engine ECU to release the immobilizer system, allowing the engine to start.
3
0
Share

When to Turn the Steering Wheel When Reversing Out of a Parking Space?

When reversing out of a parking space, follow these steps to turn the steering wheel: 1. Observe the frontmost part of the car and the boundary line ahead. Turn the steering wheel fully to the left when the front of the car just covers the boundary line. 2. Check the left rear wheel through the left rearview mirror. Turn the steering wheel fully to the left when the left rear wheel just touches the line. 3. As the car is about to straighten, turn the steering wheel back halfway. Let the car move forward about one meter, then turn the steering wheel fully to the left again until reaching the stopping point. Method for reversing into a parking space: 1. First exit: Drive slowly straight. When you see the left rear wheel crossing the line in the left rearview mirror, turn the steering wheel fully to the left (one and a half turns) until the car body is roughly aligned with the path, then hold the steering wheel steady. 2. Second exit: Drive slowly straight. When you see the right rear wheel crossing the line in the right rearview mirror, turn the steering wheel fully to the right (one and a half turns). When the car body is almost parallel to the path, turn the steering wheel back halfway, and fully straighten it when completely parallel.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.