Does the odoff light indicate fuel saving or fuel consumption?

2 Answers
McEdward
07/25/25 3:35pm
When the odoff light is on, it indicates fuel saving. The light signifies that the engine auto start-stop system is active, which significantly saves fuel for the engine. Compared to the fuel consumption per 100 kilometers, it can save at least one to two liters, but the exact amount depends on the vehicle model. Introduction to the car's od key: 1. When quick overtaking is needed, pressing the od key drops the gear to 3rd, increasing engine speed and torque, allowing for faster acceleration when stepping on the throttle. 2. When driving at low speeds in congested urban areas, activating odoff limits the transmission to gears within 3rd, reducing unnecessary switching of internal shift solenoids, while keeping the vehicle in a lower gear also aids in acceleration. 3. When the vehicle is going downhill, activating odoff limits the transmission to gears within 3rd, utilizing engine braking to assist in slowing down and reducing the need to apply the brakes.
Was this review help?
13
5
Share
SanQuinn
08/11/25 9:28pm
I've been driving for over a decade and noticed that when the ECO OFF light comes on, the car usually consumes more fuel. The ECO mode acts like a little assistant—when activated, it gently controls throttle response and AC compressor speed, allowing the engine to work with lighter loads and reducing fuel consumption. Especially in city traffic or daily commutes, you can squeeze dozens more kilometers out of a full tank. But when ECO OFF lights up, it means this mode is deactivated: throttle response becomes sharper, acceleration feels punchier, and climbing hills or overtaking becomes more effortless—at the cost of burning extra fuel. Real-world tests show around a 10% increase in fuel consumption. So, fuel-saving or fuel-guzzling? With the light on, it’s definitely thirstier. But when facing poor road conditions or urgent trips, turning it off delivers a more spirited drive. It ultimately boils down to balancing your priorities—keeping ECO mode on regularly helps maintain the car’s condition and saves some unnecessary expenses.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

What's the difference between 24v and 48v?

Taking lead-acid maintenance-free batteries for electric vehicles as an example, different voltages correspond to different numbers of batteries. The following are the differences between the two: 1. Voltage: The rated voltage of the former's pull-in coil is DC 48v, while the latter's is DC 24v. 2. Contact: The contacts of the former allow a current of 10A under 220v AC, the same as the latter under the same voltage, meaning the former's contact capacity is slightly larger than the latter's, at 2420VA. 3. Practical selection: Consider whether the contact capacity matches the actual needs and whether the control voltage matches the rated value of the relay's pull-in coil. If a 24v current is used to control a relay with a 48v pull-in coil, issues such as failure to pull in or insecure pull-in may occur.
5
2
Share

What is the infotainment system in the 2021 Volkswagen Bora?

2021 Volkswagen Bora infotainment system details are as follows: 1. Multimedia system: The top trim of the new Bora shares the same system with the new Lavida. The center console features an 8-inch multimedia system screen. Stylistically, both vehicles are quite similar. When the screen is turned off, it will still display information such as time. 2. Supports CarPlay and Baidu CarLife systems: The Volkswagen Bora supports both CarPlay and Baidu CarLife systems. In addition to conventional vehicle information and navigation displays, this system supports CarPlay and Baidu CarLife, which are essential practical configurations in today's era of widespread smartphone use. 3. Exterior design: The entire system operates smoothly with very quick transitions between programs and fast response speeds. The large screen is embedded in a black piano lacquer panel, giving it a highly designed appearance. Of course, the screen's fingerprint-collecting capability is also quite impressive.
14
0
Share

How to Solve Car Infotainment System Freezing?

Solutions for car infotainment system freezing are as follows: 1. Restart the car and the infotainment system. 2. Uninstall unnecessary software in the infotainment system. 3. Replace the faulty mainboard of the infotainment system. 4. Inspect and replace all connecting wires and ensure there are no loose connections. Additional information: Reasons for the infotainment system malfunctioning or freezing are as follows: 1. Short circuit in the power supply line causing malfunction or freezing. 2. Overload of the mainboard chip leading to system crash. 3. Poor quality of the mainboard chip causing freezing. 4. Exposed live wires in the power supply line touching the mainboard or components, or short circuits or loose and unstable connections.
14
0
Share

What are the reasons for a diesel engine suddenly stalling?

The reasons for a diesel engine suddenly stalling are as follows: 1. Poor operation of the low-pressure fuel system: Before stalling, the diesel engine's speed gradually decreases, but the engine sound remains normal, and the exhaust gas color shows no abnormalities, yet it can still lead to sudden stalling. 2. Presence of water in the diesel fuel: This may cause the diesel engine's speed to become unstable before stalling, with white smoke coming from the exhaust pipe, leading to sudden stalling during operation. 3. Damaged cylinder head gasket: If the diesel engine continues to emit white smoke and stalls or fails to start after removing water, the cylinder head gasket may need to be replaced before testing the engine again.
13
5
Share

How far can you drive with a flat tire?

Run-flat tires can still be driven for a certain distance after a puncture, while regular tires cannot continue to be driven. Below are some methods to prevent tire blowouts: 1. Regularly check tire conditions: Inspect tire pressure, observe if the tire sidewalls are cracked, and monitor tread wear. 2. Install a tire pressure monitoring system: The device will automatically alert you when tire pressure is abnormal, preventing blowouts. 3. Apply puncture-proof treatment to tires: Spray a protective film on the inner wall of the tire to prevent punctures and air leaks when encountering sharp objects. 4. Rotate tires periodically: This helps ensure even tire wear and avoids using tires of different models or with significant wear differences on the same axle. 5. Regularly correct wheel balance: Severe imbalance can cause high-frequency vibrations at high speeds, leading to uneven tire wear and compromising driving safety. After tire repairs, promptly perform balance checks and adjustments.
13
4
Share

Where is the engine number of the Great Wall Florid located?

The engine number of the Great Wall Florid is located under the front hood, on the nameplate in the engine compartment. The specific steps to find the nameplate are as follows: 1. Open the driver's door; 2. Pull the hood release lever located on the left side of the driver's leg area; 3. Lift the engine hood upwards to view it. Here is some information about the engine number: 1. The engine number is also called the VIN code: Since it consists of 17 letters and numbers, it can also be referred to as the 17-digit code. 2. The nature of the engine number is the same as a person's ID number.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.