Does the Nissan Qashqai have a sunroof?

In which direction should you drive when entering a roundabout?

When entering a roundabout, you should drive in a counterclockwise direction. Here is some additional relevant information: 1. Navigating a roundabout: You should drive counterclockwise because China follows the right-hand traffic rule. If you enter a roundabout clockwise, vehicles will have to change lanes when entering or exiting, creating intersections and defeating the purpose of the roundabout in facilitating traffic flow. Instead, it could cause problems and lead to traffic accidents. Roundabouts are high-risk areas for accidents, so you should slow down and control your speed appropriately, entering the roundabout counterclockwise. 2. Roundabout: A roundabout is a circular structure built at road intersections, typically installed where multiple traffic junctions meet. Because it is usually a circular island shape, it is called a roundabout. Roundabouts allow vehicles to travel in the same direction, converting conflict points into passage points, effectively reducing the occurrence of traffic accidents. They also help slow down vehicles when turning, aiming to minimize conflicts in vehicle movement.

3

2

Share

How Long Does the Subject 4 Review Take?

Subject 4 review takes 1~5 days before the exam. Here is a brief introduction to Subject 4: 1. Basic Information: Subject 4, also known as the Subject 4 theory test or driver's theory test, is part of the motor vehicle driver's license assessment. 2. Exam Content: After the implementation of the "Ministry of Public Security of the People's Republic of China Order No. 139", the Subject 3 test was divided into two parts. In addition to the road test, a safety and civilization knowledge test was added, commonly known as "Subject 4", which assesses "driving ethics". Since this test is conducted after Subject 3, it is commonly referred to as the Subject 4 test. Officially, there is no such term as Subject 4.

8

3

Share

Is 290 kPa Tire Pressure Normal?

Tire pressure of 290 kPa is abnormal and too high, which increases the load on the car while driving and makes it more prone to tire blowouts. Hazards of excessive tire pressure: Reduces tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan; Increases vehicle body vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing tire elasticity and increasing the load on the car while driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts. Solutions for insufficient tire pressure: If no damage is visible, simply inflate the tire to the normal pressure and reset the tire pressure system; If a puncture is found during inspection, drive to a tire shop promptly for repair and reinflation; If the tire pressure warning reappears after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to inspect and replace the wheel rim.

13

0

Share

Can Front and Rear Tires Be of Different Brands?

Front and rear tires can be of different brands, but the tire specifications must be the same. Tire Classification: Tires can be classified into approximately 8 types based on vehicle type: PC (Passenger Car) tires, LT (Light Truck) tires; TB (Truck and Bus) tires; AG (Agricultural) tires; OTR (Off-The-Road) tires; ID (Industrial) tires; AC (Aircraft) tires; MC (Motorcycle) tires. Tire Replacement Cycle: Car tires should be replaced every 3 to 5 years or every 40,000 to 60,000 kilometers. After 2 to 3 years of use, small cracks may gradually appear on the tire sidewalls. If these are noticed, the tires should be replaced promptly. Even if the tires have not reached the wear limit or mileage, they should be replaced if they are 5 years old or show extensive sidewall cracks. Tires can continue to be used as long as the sidewalls have not been impacted and the cords are not broken. Daily Tire Maintenance Tips: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to wear from driving, the tread grooves gradually become shallower. If the tread is worn flat, the tire will lose its ability to drain water and provide traction, significantly reducing the vehicle's performance. Small cracks may also pose a risk of blowouts at high speeds. Additionally, ensure that stones in the grooves are promptly removed. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool overheated tires. In hot weather or during high-speed driving, tires can overheat, and the air pressure may increase. In such cases, park to allow the tires to cool naturally. Never release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear caused by dragging between the tires and the road.

20

0

Share

What problems will occur if the carbon brush is broken?

If the starter carbon brush is broken, the motor of the starter will not rotate or will lack power. This manifests as hearing a slow and weak starting sound or only hearing the sound of the small flywheel gear operating mechanism. The engine may struggle to start or even fail to start completely. Notes: 1. The starter is only used during startup. Generally, the carbon brushes in a vehicle's starter can last for over ten years without issues. However, other causes of starting difficulties, such as needing multiple attempts to start the engine, can accelerate carbon brush wear and shorten their lifespan. 2. Carbon brushes are mainly made of graphite containing copper and silver, used to transfer electrical energy between the fixed and rotating parts of the motor. The carbon brush in a starter is block-shaped and is pressed against the commutator shaft of the starter by spring preload. 3. The starter needs to generate significant torque to move the engine's flywheel crankshaft and crank-connecting rod mechanism, so starters typically include a planetary gear mechanism to reduce speed and increase torque.

15

3

Share

Should You Pull the Handbrake or Release the Clutch First When Parking?

Usually, you should press the brake first, then the clutch. During driving, the service brake (foot brake) is commonly used to slow down and stop the vehicle while moving forward. If you only press the clutch, the car will still coast for a distance. Therefore, when parking, you should use the brake to prevent the vehicle from sliding forward or backward. In addition, there are the following three braking methods: 1. Parking on a slope: Press the brake first, then the clutch. When the clutch is pressed, the car is effectively in neutral, and without the engine's resistance, the car may roll downhill; 2. High-speed emergency stop or deceleration: Press the brake first, then the clutch. Because the higher the car's speed, the greater its inertia. If you press the clutch first, the car's inertia will be even greater, so you must press the brake first; 3. Stopping at a red light: Press the clutch first, then the brake. Because the lower the car's speed, the greater the friction resistance between the tires and the ground. If you press the brake first, the engine is more likely to stall.

17

0

Share

Does the Nissan Qashqai have a sunroof?

In which direction should you drive when entering a roundabout?

How Long Does the Subject 4 Review Take?

Is 290 kPa Tire Pressure Normal?

Can Front and Rear Tires Be of Different Brands?

What problems will occur if the carbon brush is broken?

Should You Pull the Handbrake or Release the Clutch First When Parking?

What are the causes of loud buzzing noise inside the car while driving?

What are the conditions and requirements for obtaining a driver's license?

What Causes Car Shaking When AC is On?

What Level Does SRAM X7 Belong To?