Does the new Vios come with a cigarette lighter?

What is the function of the activated carbon canister?

Automotive activated carbon canister function: absorbs gasoline vapors. The fuel vapors generated in the fuel tank, if not vented, can bulge and damage the tank. If released into the atmosphere, they pollute the air. The material inside the carbon canister absorbs these vapors, temporarily storing them. Under specific engine operating conditions, the computer opens the carbon canister purge valve, allowing these gases to enter the intake manifold to be burned. Notes: 1. The carbon canister may fail after prolonged use, and the carbon canister purge valve in some vehicles may also malfunction. If the carbon canister or its purge valve fails, the vehicle's fuel consumption will increase. 2. During regular use, it is essential to perform periodic maintenance to keep the car in good condition.

4

5

Share

What is the model code for the sixth-generation Accord?

The sixth-generation Accord is divided into three displacement models, each with a different model code. Specifically: the 2.0L displacement model code is CF9; the 2.3L displacement model code is CG5; the 3.0L V6 engine sixth-generation Accord model code is CG1. Here is some information about the Accord: 1. The European Accord was produced in the UK and was smaller in size compared to the Japanese and American Accords. This generation saw an unprecedented variety of Accord models, with several sedans available in the North American market alone, including the DX, LX, EX, LX-V6, and EX-V6. In different markets, the engine displacements ranged from 2.0L, 2.3L, to 3.0L. 2. In 1998, the sixth-generation Accord was launched in Japan. The previous sister cars, Ascot and Rafaga, were replaced by the Honda Torneo.

11

3

Share

What are the reasons for a car not starting and the dashboard flashing?

Introduction to the reasons for a car not starting and the dashboard flashing: 1. Due to low battery power, the lifespan of a battery is generally around 2 to 3 years, and its service life is directly related to driving conditions, road conditions, and driving habits. In daily vehicle use, it is essential to avoid using electrical equipment when the engine is not running, such as listening to the radio or watching videos. If the vehicle is parked for an extended period or frequently used for short trips, the battery may not be fully charged in time, significantly reducing its lifespan. It is necessary to regularly drive the car on highways or use external charging devices periodically. To resolve the issue, contact roadside assistance for a jump-start or replace the battery. 2. Faults in the vehicle's main power supply lines or control components, such as broken circuits, damaged dashboards, or issues with the main power supply control components. This situation occurs less frequently and can only be diagnosed by checking the vehicle's electrical system fault codes at a repair facility to further identify the cause of the problem.

11

0

Share

What Maintenance Should Be Done at 20,000 Kilometers?

For a vehicle that has traveled 20,000 kilometers, the following maintenance should be performed: 1. Replace the engine oil and oil filter. This is a mandatory item for every maintenance service. Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, and its performance deteriorates considerably. Over time, it can no longer protect the engine effectively. The oil filter is designed to filter out impurities, providing protection for the engine. Therefore, both the engine oil and oil filter should be replaced simultaneously. 2. Inspect the air filter. The air filter reduces the intake of air containing impurity particles, thereby minimizing the risk of wear and damage. During the 20,000-kilometer maintenance, check if the air filter is dirty. If it is excessively dirty, replace it; if not, simply clean it with an air gun. 3. Check the spark plugs. In a gasoline engine's ignition system, spark plugs introduce high-voltage current into the cylinders to generate sparks, igniting the combustible air-fuel mixture. If you notice a lack of power, it may be time to replace the spark plugs. The lifespan of spark plugs varies depending on the material: iridium spark plugs should be replaced every 80,000–100,000 kilometers, platinum spark plugs every 50,000–60,000 kilometers, and nickel spark plugs every 20,000–30,000 kilometers. 4. Inspect the brake pads. During the 20,000-kilometer maintenance, check the thickness of the brake pads. If they are excessively worn, it is advisable to replace them to ensure driving safety.

16

5

Share

How is the six-year exemption from inspection calculated?

Six-year exemption from inspection starts from the month of motor vehicle registration. Non-commercial vehicles (with fewer than 7 seats) registered after September 1, 2010, including non-commercial small and micro passenger vehicles, are eligible for the six-year exemption from inspection policy. The so-called six-year exemption from inspection only exempts the vehicle from on-site inspection. The time is calculated from the year of purchase, with the first 5 years exempt from annual on-site inspection, but requiring the application for an inspection compliance mark every two years. From the 6th year onwards, on-site annual inspection is required. Below is an introduction to the six-year exemption from inspection regulations: 1. Non-commercial large, small, and micro (with fewer than 7 seats) vehicles registered within 6 years, including non-commercial small and micro passenger vehicles, are eligible for the six-year exemption from inspection policy. 2. Vans, vehicles with 7 or more seats; vehicles that have not been registered for more than 4 years since the date of manufacture; vehicles involved in fatal accidents; and vehicles with unresolved traffic violations or accidents are not eligible for the six-year exemption from inspection policy. 3. Vehicles within the exemption scope can be exempt from on-site inspection for 6 years, but must apply for an inspection compliance mark every two years by presenting the vehicle license, ID card, and a copy of the compulsory traffic insurance policy to the vehicle management office.

10

0

Share

What do T and L mean in cars?

In cars, the meanings of T and L are as follows: T stands for turbo, which means turbocharging. L stands for liter, indicating the engine displacement in liters. Engines labeled with L without a T are generally naturally aspirated engines. Below are the differences between the two types of engine intake methods: 1. Naturally aspirated is a type of engine intake where air is drawn into the combustion chamber by atmospheric pressure without any supercharger. Naturally aspirated engines offer smoother power output and more direct response compared to turbocharged engines. 2. Turbocharging is a technology that uses exhaust gases from internal combustion engines to drive an air compressor. The main purpose of turbocharging is to increase the engine's air intake, thereby enhancing the engine's power and torque, making the car more powerful. When a turbocharger is installed on an engine, its maximum power can increase by 40% or more compared to when it is not equipped with a turbocharger.

11

4

Share

Does the new Vios come with a cigarette lighter?

What is the function of the activated carbon canister?

What is the model code for the sixth-generation Accord?

What are the reasons for a car not starting and the dashboard flashing?

What Maintenance Should Be Done at 20,000 Kilometers?

How is the six-year exemption from inspection calculated?

What do T and L mean in cars?

What are the maintenance items for a sedan at 80,000 kilometers?

What are the causes of brake noise in a Golf?

What does the oil specification SL mean?

What are the maintenance items for 40,000 kilometers?