Does the new Sylphy have front and rear anti-collision beams?

1 Answers
MacZoe
07/25/25 11:00am
The new Sylphy is equipped with front and rear anti-collision beams, enhancing driving safety. The anti-collision beams are made of aluminum alloy, with a thickness comparable to that of compact cars. The exterior of the anti-collision beams is wrapped with foam, primarily serving to support the external plastic bumper in collisions at speeds below 4 kilometers per hour. The Sylphy is a compact sedan with dimensions of 4641 mm in length, 1815 mm in width, and 1450 mm in height, and a wheelbase of 2712 mm. The Sylphy is powered by a 1.6-liter naturally aspirated engine across all models, delivering a maximum power of 99 kW and a maximum torque of 159 Nm.
Was this review help?
4
0
Share
More Forum Discussions

What cable does the Volkswagen car CD RR+ connect to?

RR+ is the rear right speaker, connect to the positive wire. Maintenance precautions for car CD players: Changing discs: When the vehicle is driving on bumpy roads or passing speed bumps, try not to change discs. Strong bumps can easily cause disc misalignment. It is advisable to change discs when the vehicle is driving relatively smoothly or when parked. Standard discs: Standard discs should be used. Deformed discs, irregularly shaped discs, discs that are too thin or too thick, cut discs, and discs with adhesive labels can all cause disc jamming. Repairing faults: The mechanism of multi-disc CD players is complex. If a fault occurs, it must be repaired at a service station. Do not disassemble it arbitrarily to avoid expanding the fault range due to human error. Function buttons: Avoid switching buttons too frequently. Switching from one function to another always requires a certain time interval. Pressing the buttons multiple times in succession will cause the mechanism to work too frequently, leading to CD jamming.
14
3
Share

How many years are left for a 2009 car to be scrapped?

Under the previous 15-year scrappage regulation, a 2009 car would be scrapped in 2024. However, the current policy determines scrappage based on mileage, with a maximum limit of 600,000 kilometers. Additional details are as follows: Annual inspection: Cars still in use after 20 years must undergo inspections four times a year. According to regulations, the typical service life of a car is around 15 years. The actual lifespan depends on usage conditions. Generally, some vehicles, such as 5-seat family cars, 7-seat SUVs, and compact cars, have no mandatory scrappage period. However, once a vehicle reaches 600,000 kilometers, the government will guide owners to scrap it. For cars older than 15 years but with mileage under 600,000 km, inspections are required every six months. If the car passes inspection, it can continue to be driven; otherwise, it will be forcibly scrapped. Failing to scrap a vehicle that should be retired may affect driver's license renewal or annual vehicle inspection.
6
2
Share

Why Do People Who Drive Roewe Cars Get Disliked?

People who drive Roewe cars getting disliked is just a form of online teasing and does not indicate any issues with the vehicles themselves. Below is an introduction about Roewe: 1. Introduction: Roewe (ROEWE) is an automobile brand under the Shanghai Automotive Industry Corporation (Group) (SAIC), launched in October 2006. The automotive technology of Roewe originates from Rover, which was previously acquired by SAIC, but the brand itself is independently owned. Since its establishment, the brand has developed rapidly, with its products covering the mid-size and upper-mid-size car markets. 2. Brand: Roewe's brand slogan is 'Taste, Technology, Achievement,' expressing SAIC's determination and confidence in inheriting advanced international automotive technology with an innovative vision and a focus on civilian vehicle technology to create a new classic international brand. 3. History: In the over 120-year history of the global automotive industry, British cars have always adhered to their traditional style, pursuing noble and elegant designs, emphasizing royal comfort, and maintaining a persistent preference for outstanding power performance and handling.
14
5
Share

What are the differences between the 2021 and 2020 Wildlander models?

The 2021 Wildlander and the 2020 Wildlander have no significant differences apart from their appearance. Below is an introduction to the Wildlander: 1. Overview: The Wildlander is the fourth member of the TNGA product family, following the eighth-generation Camry, C-HR, and the all-new Levin. It is also the first TNGA mid-size SUV model under GAC Toyota. The new SUV model was launched on February 28, 2020. 2. Naming: The new vehicle adopts a series naming approach similar to the Highlander, a large and mid-size SUV, forming the "Landa Brothers" series that covers mainstream SUV segments. The Wildlander embodies new SUV values, showcasing advanced and elegant design for a commanding presence, effortless driving pleasure for dominance, and high QDR quality for credibility. It is positioned as the "TNGA Leading New Drive SUV." 3. Exterior: The Wildlander's design retains a large number of chiseled polygonal shapes. The front face incorporates an elegant and refined design, with the upper grille seamlessly integrated with the slim, sharp headlights on both sides, creating a sense of horizontal stretch. The lower grille features a spindle-shaped design, complemented by the fog lamp grilles on both sides, reflecting the Wildlander's dual concept of strength and elegance in its exterior design.
7
4
Share

Can the electric vehicle charger be dried after getting wet?

The electric vehicle charger can be dried after getting wet, but it must be disassembled to ensure the circuit board and electronic components are thoroughly dried. After drying, let it cool naturally before use. Below are specific details about electric vehicle chargers: 1. Classification of chargers: They can be divided into two main categories based on the presence or absence of a power frequency (50 Hz) transformer. Freight tricycle chargers typically use chargers with power frequency transformers, which are bulky, heavy, and consume more power but are reliable and inexpensive. Electric bicycles and electric motorcycles usually use switching power supply chargers, which are energy-efficient and highly efficient but more prone to failure. 2. Correct operation of switching power supply chargers: When charging, first connect the battery, then plug in the power supply. After charging is complete, first disconnect the power supply, then unplug the battery. If the battery is unplugged first, especially when the charging current is high (red light), the charger is very likely to be damaged. 3. Charger classification: Common switching power supply chargers are further divided into half-bridge and single-ended types, with the latter subdivided into forward and flyback types. Half-bridge chargers are more expensive but perform better, often used in chargers with negative pulses. Single-ended chargers are cheaper and have a higher market share.
19
2
Share

What Causes the Baojun 730 to Pop Out of 2nd Gear?

Gear popping refers to the transmission automatically shifting from a certain gear back to neutral while the car is in motion. Mechanical Misalignment: The gear linkage mechanism is misaligned and not fully engaged, which can be resolved through adjustment. Mechanical Wear: Wear in the reverse gear locking mechanism inside the transmission prevents effective locking of the reverse gear. Thrust-Induced Gear Popping: Long-term wear on the meshing teeth of the inertia lock ring or the synchronizer cone ring and the inner meshing teeth of the sliding sleeve forms a tapered shape, generating axial thrust on the meshing teeth. When this thrust exceeds the locking force of the gear spring, gear popping occurs. Gear Spring Lock: The locking force of the gear spring weakens or breaks, or the self-locking steel ball dislodges or gets damaged. Severe Wear: The gear shift fork and gear shift sleeve are severely worn, or the shift fork is deformed. Improper Adjustment: Improper adjustment of the gear shift mechanism in the operating lever results in incomplete gear engagement, leaving the meshing teeth in a semi-engaged state. Solutions: Adjust the force properly or replace the synchronizer.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.