Does the New Lingpai Luxury Edition automatically lock the doors?

Does engine oil affect fuel consumption increase?

Engine oil affects fuel consumption. It provides good lubrication for the engine, reducing friction, cleaning, cushioning, and sealing. Poor lubrication: If the engine oil provides poor lubrication, it will increase the engine's movement resistance, leading to higher fuel consumption. Therefore, engine oil not only affects fuel consumption but also the engine's lifespan. It is recommended to change the engine oil every 5,000 kilometers. Long-term use of engine oil: After prolonged use, engine oil gradually deteriorates, reducing viscosity and lubrication efficiency, which increases friction. Over time, this causes severe engine wear, enlarging the gaps between moving parts. As a result, the engine may produce abnormal noises, which grow louder with increasing wear.

9

2

Share

Should I Inflate My Tires to 2.2 Bar in Autumn?

You should inflate your tires to 2.2 bar in autumn. Winter temperatures are relatively low, and due to thermal expansion and contraction, tire pressure will also change. Generally, the normal range for tire pressure is around 2.5 bar, which is suitable for regular use. However, as winter approaches, the tire pressure should be increased slightly. Typically, adjusting it to 2.6 bar is the most appropriate and safest range. Tire pressure standards for different types of tires: Standard tires: 2.4-2.5 bar; Reinforced tires: 2.8-2.9 bar; Maximum pressure: should not exceed 3.5 bar. Normal tire pressure in winter: In winter, the tire pressure should be based on the standard tire pressure of the car, with an appropriate increase of about 0.2 bar. Normal tire pressure in summer: Generally, the lower limit of the standard tire pressure for car tires is sufficient. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to avoid tire blowouts due to high temperatures.

15

0

Share

What is the logic behind automatic transmission gear shifting?

Automatic transmission will shift gears up or down based on vehicle speed by accelerating or braking. Upshifting: First press the accelerator to increase speed, then fully depress the clutch while releasing the accelerator to shift to a higher gear. P—Parking: Parking gear, starting position. When the vehicle is parked and not in use, the gear is in this position, where the wheels are mechanically locked to prevent rolling. R—Reverse: Reverse gear. Used when backing up. N—Neutral: Neutral gear. Used when temporarily stopping (e.g., at a red light). Note that this gear indicates neutral; to prevent the vehicle from rolling on a slope, always keep the brake pedal depressed. D—Drive: Drive gear, also known as the driving gear. As the name suggests, this gear is used when moving forward. L—Low: Low gear. When going downhill or descending a long slope, placing the gear in this position limits the car to the lowest gear (equivalent to first gear in a manual transmission), allowing the engine to assist in braking. This prevents the danger of brake overheating from prolonged braking by the driver.

17

4

Share

Engine Malfunction Indicator Light (MIL) is Yellow but the Car Drives Normally?

There are two colors for the engine malfunction indicator light: yellow and red. Yellow indicates a warning, while red means prohibition. When the yellow malfunction light is on, it means some system parameters of the car may have exceeded the set range. The car can still be driven at this time, but some functions may be restricted. When the red malfunction light is on, the car must stop immediately, the engine must be turned off, and driving is prohibited until the fault is checked. Common causes of the engine malfunction light turning on include: sensor failure, oil quality issues, poor combustion of the air-fuel mixture, turbocharging problems, intake problems, exhaust problems, and anti-theft system malfunctions. If the engine malfunction light comes on, follow these steps: After the engine malfunction light comes on, first check if the engine is running normally. Look for issues such as shaking, black smoke, or difficulty starting. If any of these problems exist, avoid restarting the engine. Especially note that if the red light is on, do not restart the engine under any circumstances. If the engine is running normally and the car can be driven, go to a service station as soon as possible to diagnose the issue. The service station can easily read the fault codes using a portable diagnostic tool to obtain targeted repair information. If the engine is running normally, the owner can also try gently reconnecting various wiring harness connectors, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position might reset the light.

20

3

Share

Is the vehicle inspection valid throughout October if it expires in October?

Vehicle annual inspection is based on the month rather than the specific date. As long as it does not exceed the last day of October, the vehicle can be driven on the road without issues. However, it's important to remind car owners that vehicle insurance is tied to both the month and specific date. For example, if the insurance is purchased on October 8th, it will expire on October 7th of the following year. Introduction to vehicle annual inspection: It refers to a mandatory inspection for all vehicles that have obtained official license plates and registration certificates, equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety". Purpose of vehicle annual inspection: Vehicle annual inspection can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. Relevant regulations regarding vehicle annual inspection are stipulated in documents such as the "Regulations for the Implementation of the Road Traffic Safety Law". Some preparatory work is required before the inspection to ensure normal and smooth passage. There are initial and periodic inspections, along with some related policies.

9

3

Share

How Long Can You Delay Taking the Subject One Test After Losing 12 Points?

After accumulating 12 penalty points on your driver's license, you must attend a seven-day course on road traffic safety laws at the traffic management department of the public security authority in the jurisdiction where the license was issued or where the violation occurred within 15 days. If you refuse to participate in the study or take the test: The vehicle management office will announce the suspension of your driver's license within 15 days. According to regulations: The driver must attend a seven-day course on road traffic safety laws, regulations, and related knowledge at the traffic management department of the public security authority in the jurisdiction where the license was issued or where the violation occurred within 15 days. After completing the course, the vehicle management office must administer a test on road traffic safety laws, regulations, and related knowledge within 20 days. If the test is passed, the penalty points will be cleared, and the driver's license will be returned.

8

0

Share

Does the New Lingpai Luxury Edition automatically lock the doors?

Does engine oil affect fuel consumption increase?

Should I Inflate My Tires to 2.2 Bar in Autumn?

What is the logic behind automatic transmission gear shifting?

Engine Malfunction Indicator Light (MIL) is Yellow but the Car Drives Normally?

Is the vehicle inspection valid throughout October if it expires in October?

How Long Can You Delay Taking the Subject One Test After Losing 12 Points?

Why is the new Emgrand often said to have high fuel consumption?

Should You Use Internal or External Air Circulation for Defogging on Rainy Days?

Can a full-size spare tire that's 5 years old be used as a new tire?

Will Traffic Violations Always Be Captured by Cameras?