Does the new Jetta have a rear anti-collision beam?

1 Answers
AndrewMarie
07/29/25 3:13pm
The new Jetta does not have a rear anti-collision beam, but it is equipped with a front anti-collision beam. The function of the rear bumper is to absorb impact force. For minor collisions, the rear bumper is designed to be sacrificed to ensure the integrity of the vehicle's chassis and prevent deformation. The bumper covers most of the front and rear areas of the car, primarily absorbing and mitigating external impacts, serving as a safety device to protect the front and rear parts of the vehicle body. The Jetta lineup includes models such as the VS3, VS5, and VS7. Among them, the Jetta VS5 has a body length, width, and height of 4419mm, 1841mm, and 1616mm respectively, with a wheelbase of 2630mm. It is powered by a 1.4T turbocharged engine paired with a 5-speed manual transmission. This engine delivers a maximum power of 110kW and a maximum torque of 250Nm.
Was this review help?
8
2
Share
More Forum Discussions

What engine is used in the Jetta VS7?

Jetta VS7 uses a 1.4T L4 turbocharged engine with direct fuel injection, delivering a maximum horsepower of 150ps, a maximum power of 110kw, and a maximum torque of 250nm. The maximum torque speed is 3000rpm per minute, paired with a 5-speed manual transmission. Taking the 2020 Jetta VS7 as an example, it belongs to the mid-size SUV category with body dimensions of 4624mm in length, 1841mm in width, and 1644mm in height, a wheelbase of 2730mm, a fuel tank capacity of 51l, a trunk capacity of 548l, and a curb weight of 1425kg.
13
2
Share

How often should the throttle body be cleaned?

The throttle body should be cleaned every 20,000 kilometers. Not cleaning the throttle body for a long time can cause errors in the throttle opening, allowing air with impurities to enter the engine combustion chamber, leading to abnormal engine operation, unstable idling, sudden throttle closure while driving, reduced power, and difficulty starting. The steps for cleaning the throttle body are: 1. Open the hood and locate the engine's throttle body; 2. Use a flat-head screwdriver to remove the air filter and intake pipe, then unplug the electrical socket on the throttle body; 3. After removing the screws, take off the throttle body and use a dry cloth to block the engine intake to prevent dirt from entering the engine; 4. Spray the throttle body with cleaner.
8
5
Share

What is the method for cleaning dirty car seats?

Dirty car seats can be cleaned by the following methods: 1. Wipe off most stains with a cold, damp towel; 2. Use foam cleaner for cleaning and wiping; 3. Prepare a dilute ammonia solution with 1 part 10% ammonia and 10 parts water for wiping. The method for adjusting the front and rear position of car seats is: 1. Lift the adjustment handle at the lower right of the seat; 2. Release the fixing device, and the seat can then move forward and backward; 3. After adjusting the position, release the adjustment handle. The method for adjusting the backrest angle of car seats is: 1. Rotate the adjustment knob on the left side of the seat; 2. While adjusting, use the force of your back to adjust the backrest angle until it is suitable for your palm to press against the upper end of the steering wheel.
10
4
Share

How to Turn Off the Air Conditioning in a Sedan?

To turn off the air conditioning in a sedan, follow these steps: 1. Turn the knob all the way to the left to shut off the air conditioning; 2. Press the menu button below the AUTO button on the air conditioning panel, and the air control interface will appear on the central screen. Click the OFF button in the lower-left corner to turn it off. The functions of car air conditioning are: 1. To adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to a comfortable state, providing a pleasant riding environment for passengers and reducing travel fatigue; 2. To create favorable working conditions for the driver, serving as an important ventilation device for ensuring safe driving. Maintenance methods for car air conditioning: 1. Regularly check the refrigerant and compressor oil; 2. Periodically clean the surface of the condenser; 3. Regularly clean the surface of the evaporator.
2
0
Share

What is the front cover of a sedan called?

The front cover of a sedan is called the hood, also known as the engine cover. The hood is designed for easy maintenance, such as adding windshield washer fluid, engine oil, brake fluid, power steering fluid, and coolant, all of which require opening the hood. The functions of the hood are: 1. Effectively adjusting the direction of air flow relative to the car's movement and the resistance force generated by the air, reducing the impact of airflow on the car; 2. Protecting the engine and surrounding pipeline components; 3. Enhancing aesthetics; 4. Effectively adjusting the direction and form of reflected light, reducing the impact of light on the driver; 5. Effectively blocking damage caused by explosions, acting as a protective shield; 6. Providing support.
18
1
Share

What is the fuel consumption of the 2021 third-generation Haval H9?

Haval H9 2021 third-generation fuel consumption is 13.5 liters. Below are some related introductions about the Haval H9: 1. Exterior: The new front grille features thicker horizontal chrome trim. The dimensions are 4856mm in length, 1926mm in width, and 1900mm in height, with a wheelbase of 2800mm. The Haval H9 also comes equipped with automatic retractable side steps for easier entry and exit. 2. Powertrain: It uses a recalibrated 2.0T engine that meets the China VI emission standards, delivering a maximum power of 224 horsepower and a peak torque of 385 Nm.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.