Does the new Elantra have automatic braking function?

What is the purpose of the kingpin inclination angle?

The kingpin inclination angle serves to enable the wheels to automatically return to the correct position after steering and to make steering easier. The size of the kingpin inclination angle value has a significant impact on the car's steering and handling performance. This parameter generally only appears on the steering wheels. It refers to the inward tilt of the wheel's kingpin when viewed from the front to the rear of the car. In the lateral plane of the car, the upper end of the kingpin axis is slightly inclined inward, a phenomenon known as kingpin inclination. In the lateral vertical plane, the angle between the kingpin axis and the vertical line is called the kingpin inclination angle. Both the kingpin caster and the kingpin inclination have the effect of automatically returning the steering wheels to the correct position. However, the kingpin caster's return effect is related to the vehicle speed, while the kingpin inclination's return effect is not related to the vehicle speed. Therefore, at high speeds, the effect is mainly due to the kingpin caster, while at low speeds, it is mainly due to the kingpin inclination. The kingpin inclination angle ensures the car's straight-line driving and the wheels' automatic return to the correct position through the front axle load. The kingpin inclination and wheel camber angles are mainly determined by the steering knuckle. The kingpin inclination angle cannot be adjusted; if the inclination angle error is too large, the steering knuckle should be replaced. Currently, many cars with independent suspensions no longer have the kingpin component. However, in wheel alignment, the term 'kingpin' is still used as a synonym for the steering wheel's steering axis, meaning that when the steering wheel turns, it rotates around the kingpin axis.

11

0

Share

What are the engine specifications of the Golf 6?

The engine model of the Golf 6 is EA211-DJS, with a maximum power of 110 kW, maximum torque of 250 Nm, maximum horsepower of 150 Ps, maximum power speed of 5000-6000 rpm, maximum torque speed of 1750-3000 rpm, and equipped with direct fuel injection technology. The engine used in the Golf 6 is independently developed by the Volkswagen Group and is manufactured in Shanghai. For daily maintenance of the Golf 6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and keep the oil volume moderate; When oil passes through the fine holes of the filter, solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing dirt back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder wall, mixing with metal powder from part wear to form sludge. When the amount is small, it suspends in the oil; when large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

1

Share

How to Activate One-Touch Window Control?

Activating one-touch window control involves the following steps: 1. Press and hold the window switch; 2. Release the button when the window reaches the desired position; 3. Briefly press and release the window switch to automatically lower the window. The one-touch window feature includes anti-pinch protection—if an object is detected between the glass and frame during automatic closing, the window will stop and reverse to its open position. This function is located on the driver's door armrest, allowing full automatic window movement with a single switch activation.

15

0

Share

What is the standard tire pressure for the Mercedes-Benz GLA200?

The normal tire pressure range for the Mercedes-Benz GLA200 is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. If you want to check the current tire pressure of the Mercedes-Benz GLA200 during daily driving, you can activate the tire pressure monitoring system, and the tire pressure value will be displayed on the central LCD screen of the instrument panel. The specific method is to press the LCD adjustment button on the left combination instrument of the steering wheel to switch to the tire pressure monitoring system interface. Generally, a tire pressure above 2.8 bar is considered too high, and a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), it generally indicates one of the following three reasons: Abnormal tire pressure: Typically alerts when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system will still record the previous data, causing the tire pressure monitoring indicator light to come on. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the tire inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, the only solution is to replace it with a new part.

18

1

Share

What is the purpose of the gap in the front windshield?

The gap in the front windshield serves as an air vent for the air conditioning system and also provides protection for the windshield. Here are the specific details about the front windshield gap: 1. Function: Under sunlight exposure, the dashboard expands as the temperature rises. If the windshield and dashboard were tightly fitted, the expanding dashboard would push against the windshield, which over time could affect its sealing. 2. Defogging: This gap also functions as an air vent for the air conditioning system. When the front windshield fogs up, activating the defogging feature directs warm air through this gap onto the windshield to clear the fog.

6

5

Share

How many seats does the Wuling Victory have?

The Wuling Victory is a 6-seater vehicle. It is a compact MPV under the Wuling brand, with body dimensions of 4875mm in length, 1880mm in width, and 1690mm in height, and a wheelbase of 2800mm. It features front-wheel drive, with a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. The Wuling Victory is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 108 kW at 5200 rpm and a maximum torque of 250 Nm between 2200 and 3400 rpm.

8

4

Share

Does the new Elantra have automatic braking function?

What is the purpose of the kingpin inclination angle?

What are the engine specifications of the Golf 6?

How to Activate One-Touch Window Control?

What is the standard tire pressure for the Mercedes-Benz GLA200?

What is the purpose of the gap in the front windshield?

How many seats does the Wuling Victory have?

Where is the sunroof drain outlet of the Buick Excelle?

Which Skoda model is the skooa?

What are the length, width, and height of a 7.6-meter vehicle?

Will the car move in neutral gear?