Does the New Baojun RS3 have fog lights?

2 Answers
DeJaxon
07/24/25 5:44am
There are no front fog lights. The original lights of the New Baojun RS3 have low brightness, a small light angle, and relatively large blind spots. 1. Fog light description: The front fog light has three diagonal lines on the left, crossed by a curved line, and a semi-oval shape on the right; the rear fog light has a semi-oval shape on the left and three horizontal lines on the right, crossed by a curved line. Generally, the fog light switch is located on the left rear or left side of the steering wheel and has a prominent identifier to alert the user. 2. Introduction to fog lights: As the name suggests, they are light signals used in rainy or foggy weather. Their main characteristic is strong penetration in fog, making it easier for vehicles or pedestrians to notice them early in low-visibility weather, thereby effectively preventing accidents. When fog lights are turned on, they can significantly interfere with the vision of other drivers, especially in environments with good visibility, as they can be very dazzling and may even cause harm to the driver's eyes.
Was this review help?
7
2
Share
WestonMarie
08/11/25 1:24am
The New Baojun RS-3 usually comes with front fog lights in the high-end version, as I personally witnessed during my test drive. The fog light function is extremely practical, especially in rainy or foggy weather, helping you illuminate the road ahead and avoid hitting obstacles. As a compact SUV, the RS-3 is thoughtfully designed, but the low-end version might not have them as standard. You should carefully check the configuration sheet or ask the 4S store to avoid wasting money. If it doesn’t have fog lights, don’t worry—you can install an aftermarket part for a few hundred bucks, and choosing LED ones will be brighter. When driving in heavy fog, remember to turn on the fog lights instead of high beams, as the latter can cause glare and reduce visibility.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

What class is the Cadillac CT6?

The Cadillac CT6 is a Class C vehicle. Class C vehicles typically have a wheelbase ranging from 2800mm to 3000mm, a body length between 4800mm and 5000mm, and an engine displacement exceeding 2.4 liters. Taking the 2021 Cadillac CT6 as an example, its body dimensions are: length 5223mm, width 1879mm, height 1492mm, with a wheelbase of 3109mm and a fuel tank capacity of 72 liters. The 2021 Cadillac CT6 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine producing a maximum horsepower of 237 PS, a maximum power of 174 kW, and a maximum torque of 350 Nm, paired with a 10-speed automatic transmission.
13
2
Share

Is Tesla Made Entirely of Aluminum Body?

Tesla is not entirely made of aluminum body. The Model-S developed and manufactured by Tesla features an all-aluminum body, while models like the Model 3 adopt a steel-aluminum hybrid body structure. The primary reason for Tesla's shift to a steel-aluminum hybrid body is manufacturing costs, which allows for further reduction in product pricing to attract more consumers. The Model-S developed by Tesla uses an all-aluminum body, balancing lightweight and high-strength characteristics. Besides the body, most materials in its front and rear suspensions are also aluminum. From a manufacturing perspective, the production method of this car is fundamentally different from other vehicles. Since aluminum alloy materials are sensitive to heat, traditional welding processes can lead to reduced material strength. Additionally, due to heat-induced deformation, achieving precise dimensional accuracy in assembling an all-aluminum body is challenging. The Model 3 employs a steel-aluminum hybrid body structure also because high-strength aluminum alloys incur higher costs in manufacturing and maintenance. Aluminum alloys are not only more expensive in material procurement but also complicate the automotive production process. Due to the inherent properties of aluminum alloys, ensuring sufficient strength requires various riveting and welding techniques during the body assembly stage, naturally increasing processing costs. Therefore, all-aluminum bodies are currently more common in relatively higher-priced models such as the Land Rover Range Rover, Jaguar XF, and F-PACE.
15
0
Share

Should the Vehicle License Be Kept in the Car?

It is mandatory to keep the vehicle license in the car. Below are specific details about the motor vehicle license: Overview of the Vehicle License: The motor vehicle license is a legal document that permits the vehicle to operate on roads within China. Components of the Vehicle License: The vehicle license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the endorsed license core, while the back features a photo of the vehicle, sealed in a plastic cover. The supplementary page is also an endorsed license core. Legal Consequences of Not Carrying the License: Driving without the vehicle license is a violation of regulations, whether the driver has not obtained the license or simply forgot to carry it.
2
4
Share

Where is the fuse box of the Buick Envision?

Buick Envision fuse box locations: 1. Trunk; 2. Engine compartment; 3. Inside the passenger seat panel. Taking the 2021 Buick Envision as an example, its body structure is a five-door five-seat SUV, with body dimensions of: length 4694mm, width 1839mm, height 1686mm, wheelbase 2750mm, fuel tank capacity 66L, and curb weight 1610kg. The 2021 Buick Envision features a front McPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, and maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
1
1
Share

What are the differences between the imported 525 and the domestically produced 525?

The differences between the imported 525 and the domestically produced 525 are: 1. Different body lengths: the imported 525 is 4954mm long, while the domestically produced 525 is 5087mm long. 2. Different wheelbases: the imported 525 has a wheelbase of 2975mm, while the domestically produced 525 has a wheelbase of 3108mm. Taking the 2021 BMW 525 as an example, it belongs to the mid-to-large-sized car category, with a fuel tank capacity of 68 liters and a curb weight of 1705kg. The 2021 BMW 525 features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 184ps, a maximum power of 135kw, and a maximum torque of 290nm, paired with an 8-speed automatic transmission.
13
1
Share

What Causes the Leather Friction Sound When Turning the Steering Wheel?

The reasons for abnormal sounds when turning the steering wheel include the sound from the turn signal returning to position, noise from the steering column dust cover, and noise from the shock absorber plane bearing. Below are the specific reasons: Sound from the turn signal returning to position: If the turn signal is activated while turning, this sound is produced by the rebound clip of the turn signal's automatic return mechanism. The vehicle owner should confirm this situation. If it is indeed the case, then this is a normal occurrence. Noise from the steering column dust cover: If the abnormal sound comes from below the steering wheel, it is likely noise from the steering column dust cover. Due to insufficient lubrication of the dust cover, friction sounds can occur. In this case, the owner only needs to apply some grease inside the dust cover, and the noise will disappear. Noise from the shock absorber plane bearing: If the abnormal sound originates from outside the vehicle, it is likely due to insufficient lubrication of the shock absorber's plane bearing. By opening the hood and listening to see if the sound is coming from the top mount of the shock absorber, one can determine if it is indeed from the plane bearing. Applying grease to the plane bearing can help. If the noise persists after greasing, the plane bearing will need to be replaced.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.