Does the Navigator have an extended version?

What does it mean when one side of a traffic light is broken while the other side is working normally?

When encountering a situation where one side of a traffic light at an intersection is broken while the other side is functioning normally, you can judge based on other intersections. Wait until the green light for your intended direction of travel is illuminated before proceeding through the intersection. If you are unsure how to judge, first use your phone or dashcam to record the malfunctioning traffic light, then proceed through the intersection as if it were an uncontrolled intersection, ensuring safety and paying attention to vehicles on other roads. Relevant information about traffic lights is as follows: 1. Introduction: Traffic lights are signals that direct traffic flow, typically consisting of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to proceed, and a yellow light serves as a warning. 2. Control methods: The most basic control method is fixed-time control for a single intersection. Line control and area control can also use fixed-time methods, known as static line control systems and static area control systems.

3

5

Share

What Causes the Throttle Pedal to Vibrate?

The reason for throttle pedal vibration is that the car's throttle is too dirty or the fuel injectors have excessive carbon buildup. After prolonged driving, a dirty throttle can prevent it from closing properly, leading to excessively high idle speed in the car's engine. Excessive carbon buildup generated during the engine's operation can cause the engine throttle to vibrate, especially when starting the vehicle, where the engine often vibrates more severely. Methods to resolve throttle pedal vibration: 1. Clean the car's fuel system: Clean the car's throttle and check if it is clogged, inspect the fuel injectors for excessive carbon buildup; 2. Check the engine mounts: The engine is installed within the frame with a shock-absorbing component, which is the rubber mount; 3. Clean and change the transmission fluid: Cars should undergo regular maintenance, including changing the vehicle's fluids; 4. Check if the car's four-wheel alignment is accurate.

5

2

Share

Why is the exhaust pipe noise loud when stepping on the accelerator?

Engine noise is directly related to the RPM (revolutions per minute). The higher the RPM, the louder the sound. When you step on the accelerator, the engine RPM increases, and consequently, the noise also becomes louder. Possible causes for this phenomenon include issues with the air filter, spark plugs, ignition wires, gasoline, fuel filter, carburetor, or fuel pump. You can systematically check these components to identify any problems. Here is some relevant information about the car's cabin air filter: 1. Introduction: The car cabin air filter is a specialized filter designed for air purification inside the vehicle compartment. It uses activated carbon composite filter material, which combines highly efficient adsorption material (activated carbon) with long-fiber non-woven fabric, resulting in a compact structure. 2. Function: It effectively filters smoke odors, pollen, dust, harmful gases, and various other odors. The filter also efficiently captures and adsorbs particulate impurities, achieving oil filtration and air purification performance.

17

0

Share

What causes the jerking sensation when shifting from N to D gear?

Damaged solenoid valves are a significant cause of jerking sensations. Below is relevant information about gear positions: 1. Concept: Gear positions are adjustment devices that regulate a car's speed and traction (torque). The lower the gear, the slower the speed, but the greater the car's traction (torque). The higher the gear, the faster the speed, but the smaller the car's traction (torque). Gear positions are generally divided into two main categories: forward gears and reverse gear. Engaging a forward gear makes the car move forward, while engaging reverse gear makes the car move backward. 2. Common car gear positions: Typically, common cars have five forward gears and only one reverse gear. The first forward gear is the starting gear, where the speed is the slowest (0-10 km/h), but the torque is the greatest.

17

0

Share

How Wide is an Average Family Car?

The average sedan is approximately 4.8 meters long and 1.8 meters wide. The dimensions vary depending on the model. Length: Microcars range from 3 to 4 meters, compact cars around 4 meters, midsize cars around 5 meters, and luxury cars over 5 meters. Heavier vehicles generally offer better stability at high speeds. Factors influencing high-speed stability include: 1. Vehicle Tires: Tires are the only components in contact with the road. Wider and flatter tires generally improve stability at high speeds. 2. Vehicle Shape: Aerodynamics play a crucial role in high-speed stability; vehicles with better aerodynamic designs are more stable. 3. Drivetrain: Most vehicles are front-wheel drive, rear-wheel drive, or all-wheel drive. All-wheel drive vehicles tend to be more stable than two-wheel drive vehicles. 4. Suspension System: Vehicles with independent suspension systems, such as MacPherson struts or multi-link suspensions, are generally more stable than those with non-independent suspension systems.

16

3

Share

Is 15 Liters per 100 Kilometers Normal?

Fuel consumption of 15L/100km means that 15 liters of fuel are consumed every 100 kilometers, which calculates to 0.15 liters per kilometer. Strictly speaking, 15L/100km is relatively high fuel consumption, as most vehicles on the market typically have a fuel consumption level of around 7 to 8 liters. Relevant information about fuel consumption is as follows: 1. Introduction: Fuel consumption generally refers to constant-speed fuel consumption, which is the vehicle's fuel consumption per 100 kilometers obtained in constant-speed driving fuel consumption tests specified by national standards for certain types of vehicles. 2. Testing Methods: The test can be conducted on the road or on a chassis dynamometer, and the fuel consumption per 100 kilometers is then determined using the 'flowmeter method' or 'carbon balance method'.

12

5

Share

Does the Navigator have an extended version?

What does it mean when one side of a traffic light is broken while the other side is working normally?

What Causes the Throttle Pedal to Vibrate?

Why is the exhaust pipe noise loud when stepping on the accelerator?

What causes the jerking sensation when shifting from N to D gear?

How Wide is an Average Family Car?

Is 15 Liters per 100 Kilometers Normal?

How Many Days Between Refueling for a Typical Family Car?

What is the front suspension type of the Infiniti Q50?

How many kilometers for the first maintenance of a new X-Trail?

Does Mazda Burn Engine Oil?