Does the Mitsubishi ASX comply with China VI emission standards?

1 Answers
SarahFitz
07/29/25 5:23pm
Among the currently available models of the Mitsubishi ASX, only those meeting China V emission standards are offered, with no models compliant with China VI standards. The China V emission standard is equivalent to the Euro 5 standard currently in effect in Europe, imposing stricter limits on vehicle pollutants such as nitrogen oxides, hydrocarbons, carbon monoxide, and particulate matter. Each upgrade from China I to China IV has reduced per-vehicle pollution by 30% to 50%. The Mitsubishi ASX measures 4366mm in length, 1780mm in width, and 1640mm in height, with a wheelbase of 2670mm. It is a 5-door, 5-seater SUV equipped with a 5-speed manual transmission.
Was this review help?
14
3
Share
More Forum Discussions

What are the differences between China 6 and China 5 standards?

Here are the specific differences between China 5 and China 6: 1. China 6 adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type used. In the China 5 phase, diesel and gasoline vehicles had different emission standards. 2. Compared to China 5, the China 6 standard reduces nitrogen oxides (NOx) by 77%, particulate matter (PM) by 67%, introduces a limit for particle number (PN), and includes requirements for emission control device durability and on-board diagnostics (OBD). 3. China 6 imposes stricter compliance monitoring requirements, including type testing and information disclosure, production conformity checks, new vehicle inspections, in-use compliance checks, and simplifies the compliance determination method.
20
1
Share

What Does 5W-40 Engine Oil Mean?

5W-40 engine oil refers to the viscosity grade of the oil. Oil viscosity is the most important performance indicator for measuring the fluidity of oil under various conditions. Internationally, 'SAE' is commonly used to denote the viscosity grade of engine oil. Oil viscosity: Simply put, it indicates whether the lubricating oil is thin or thick. Lower oil viscosity means the oil film is thinner, with better fluidity and relatively less resistance to engine operation; however, it has weaker resistance to shear under high temperature and pressure. Conversely, higher oil viscosity means the oil film is thicker, with reduced fluidity and relatively greater resistance to engine operation, but it offers better shear resistance under high temperature and pressure, helping friction pairs resist wear under greater pressure. Therefore, most family cars focused on fuel economy use low-viscosity oil, while performance cars focused on power and trucks frequently operating under heavy loads mostly use high-viscosity oil. SAE: Internationally, 'SAE' is commonly used to denote the viscosity grade of engine oil. SAE stands for the 'Society of Automotive Engineers' in English. It measures values such as low-temperature starting viscosity, low-temperature pumping viscosity, high-temperature kinematic viscosity, and high-temperature shear viscosity of automotive engine oil. Based on the measured data, engine oil is divided into several grades, which constitute the SAE viscosity index of the oil.
11
3
Share

Which province does the license plate abbreviation 'Jin' represent?

License plate 'Jin' is the abbreviation for Shanxi Province. The license plate abbreviations for various regions in Shanxi are as follows: JinA for Taiyuan, JinB for Datong, JinC for Yangquan, JinD for Changzhi, JinE for Jincheng, JinF for Shuozhou, JinG for Yanbei, JinH for Xinzhou, JinJ for Lüliang, JinK for Jinzhong, JinL for Linfen, and JinM for Yuncheng. License plates serve as a means of information registration for vehicles, allowing identification of the vehicle's region of origin through the plate. The composition of a license plate: the first character is a Chinese character representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the respective province, municipality, or autonomous region; the second character is an English letter representing the prefecture-level administrative region where the vehicle is registered, serving as the alphabetic code for the respective prefecture-level city, region, autonomous prefecture, or league.
13
4
Share

Is it illegal to install a roof rack on a car?

According to regulations, installing a roof rack is not illegal. Under normal regulations, the total height of the vehicle with the roof rack should not exceed 4 meters, and the height from the roof should not exceed 0.5 meters. Items placed on the roof rack must be securely fastened to ensure driving safety. Precautions for using a vehicle roof rack are as follows: 1. When using the roof rack, ensure that the cargo is evenly distributed, and regularly check the fixing screws of the rack. 2. It is best to use non-elastic ropes to secure items, ensuring that they are firmly fixed and will not fall off when driving on bumpy roads or during emergency braking, thus avoiding potential hazards.
12
3
Share

What are the precautions for cleaning the car throttle?

Car throttle is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to generate power. The precautions for cleaning the throttle are as follows: 1. Use a dedicated throttle cleaner. 2. Clean the sealing parts of the intake thoroughly. 3. Remove the intake pipe during cleaning, expose the throttle, and then disconnect the negative terminal of the battery. The method for cleaning the throttle is as follows: 1. Turn off the ignition switch and disconnect the negative terminal of the battery. 2. Remove the throttle cable, intake hose, and screws securing the throttle in sequence. 3. Clean the throttle with the cleaner, and use a cotton thread to wipe areas that are hard to reach.
10
5
Share

How Often Should the Fuel Filter in a Car Be Replaced?

The fuel filter in a car should be replaced approximately every 60,000 kilometers. The fuel filter, also known as the fuel strainer, functions to remove iron oxide, dust, and solid debris contained in the fuel, preventing blockages in the fuel system, reducing mechanical wear, ensuring stable engine operation, and improving reliability. The steps to replace the fuel filter are as follows: 1. Release the residual pressure in the fuel system. 2. Remove the grounding wire near the fuel filter. 3. Place a basin beneath the filter. 4. Pull out the inlet fuel line and then remove the adjacent outlet fuel line. 5. Remove the old fuel filter to complete the replacement. Precautions for replacing the fuel filter include: 1. Ensure the overall sealing of the air filter and cabin air filter. 2. Use the gasoline grade specified by the car manufacturer.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.