···
Log in / Register

Does the MG6 require pressing the lock button twice for one-touch locking?

3 Answers
ElizabethFitz
07/30/25 2:53am
The MG6 requires pressing the lock button twice for one-touch locking. The first press produces a locking sound, and the side mirrors fold after the second press. Introduction to One-Touch Start: The car one-touch start is a part of smart car systems, serving as a button device that simplifies the ignition process and can also be used to turn off the engine. The one-touch start can be retrofitted either at the original car key lock position or as an independent panel. Functions of One-Touch Start: The intelligent one-touch start system features include automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-touch start, one-touch shutdown, automatic locking before driving, automatic unlocking when parking and turning off the engine, and an additional trunk-opening function.
Was this review help?
15
2
Share
McCaden
08/16/25 9:13am
As a long-time MG6 owner, I've encountered this issue before. Normally, pressing the lock button once will lock all doors and automatically fold the mirrors. But there are special cases to note: if the windows aren't fully closed, you need to hold the lock button for 3 seconds to auto-close them; when finding your car in a parking lot, pressing the lock button twice will make the lights flash and horn sound - super convenient. I recommend developing the habit of pulling the rear door after locking to ensure it's truly secured. Once I got burned by this - pressed the key and walked away without noticing the door bounced back unlocked, nearly losing items inside. So don't fully rely on the key's indicator light, manual verification is most reliable.
Was this review help?
5
4
Share
Expand All
VonEthan
10/22/25 2:06am
Tried several operation methods, the MG6 doesn't require pressing the remote key twice to lock. Under normal conditions, pressing the remote key once will completely lock the doors. The more practical feature is the keyless entry system that automatically unlocks when the key is near and locks when leaving, though it's recommended to set the sensitivity properly in the car's system. Pay special attention to special cases: if a door isn't closed properly, pressing the lock button will trigger an alarm prompt, and you'll need to close the door properly before locking; if there's signal interference or the key is running low on battery, it's normal to press several times to lock. I'm used to watching the side mirrors fold into place after locking, and checking if the hazard lights flash twice for confirmation. Avoid keeping the key with your phone as it can interfere with the signal.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

What is the wading depth of the Trumpchi GS4?

The wading depth of the Trumpchi GS4 is 400mm. The wading depth of the Trumpchi GS4 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact cars and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Trumpchi GS4 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical structure (connecting rods, pistons, crankshaft, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the vehicle from automatically restarting after stalling in the water, which could cause severe damage if water enters the engine. Judge the underwater road conditions based on the passage of the vehicle ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and other reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not enter the water recklessly; choose an alternative route instead.
17
3
Share

What is the maximum wading depth of the Magotan?

The maximum wading depth of the Magotan is 310mm. The wading depth of the Magotan is determined by the height of the vehicle chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake is below the water level when the Magotan is wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Based on the passage of vehicles ahead, assess the underwater road conditions and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. For roads prone to water accumulation, observe warning water level markers, trees, or reference points like the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the tire height or the engine's air intake, do not enter the water recklessly; consider alternative routes instead.
5
1
Share

How to Check for Positive Short Circuit in Car Electrical Circuits?

The car's electrical circuit has many branches, each with its own fuse. A short circuit will cause a positive to ground (negative) connection, which can often be observed with the naked eye. To check with a multimeter, measure the resistance between the top end and the fuse. Insert one end of the test light into the battery's positive terminal and the other end between the top end and the fuse. In the circuit, if the current does not flow through the electrical appliance but directly connects the two poles of the power supply, it is called a short circuit (Short-circuit).
8
1
Share

What are the body dimensions of the 2019 Camry?

2019 Camry's body dimensions are 4885mm in length, 1840mm in width, and 1455mm in height, with a wheelbase of 2825mm. The Camry is a model under GAC Toyota. The 2019 Camry series comes standard with TPMS tire pressure monitoring system, and all models except the 2.0 Leading Edition and Elite Edition feature numerical display. The 2019 Camry offers dual styling designs: Luxury and Sport, both inspired by Toyota's new "Keen Look" design language. The Luxury version features a large trapezoidal horizontal grille, a streamlined body posture, lower waistline, and an extended roofline that enhances rear headroom.
18
1
Share

Is Insurance Valid for Unlicensed Vehicles?

Insurance for unlicensed vehicles is valid, as there is no direct correlation between license plates and insurance validity. Insurance companies typically consider that motor vehicles should be legally licensed before being driven on the road, as explicitly stipulated in the commercial third-party liability insurance and motor vehicle loss insurance clauses. Therefore, in the case of unlicensed new vehicles involved in accidents, if the insured vehicle is not displaying a license plate at the time of the incident, the insurance company will not be liable for compensation. License plates, commonly referred to as vehicle tags, are plates affixed to the front and rear of a vehicle, usually made of aluminum, sheet metal, plastic, or paper, displaying the vehicle's registration number, registration region, or other relevant information.
7
1
Share

What sports car has a logo similar to Wuling Hongguang?

The sports car with a logo resembling Wuling Hongguang is the Corvette. The Corvette is a high-performance sports car brand produced by Chevrolet under General Motors in the United States. Its emblem consists of two crossed flags: one black-and-white flag represents the Corvette's participation in road racing competitions, while the red flag features Chevrolet's bowtie logo, trophies, and flowers. The Corvette is equipped with a V8 engine, boasting a massive displacement of 7.0 liters (13Z06). The Corvette ZR1 model delivers an impressive 638 horsepower and 604 lb-ft of torque, accelerating from 0 to 100 km/h in just around 3 seconds, with a top speed reaching 350 km/h.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.