Does the Mercedes S350 require lift mode for tire replacement?

1 Answers
Gloria
07/29/25 11:53am
The Mercedes S350 does not require lift mode for tire replacement. Tires must be replaced when reaching the wear limit: The tire wear has reached the wear limit indicator. There are small triangular patterns along the sidewall and the edge of the tread. Moving horizontally from any of these triangles to the tread pattern, you will find small raised bars within the tread grooves, which are the safety indicators. If the tread wears down to this point, it means the tires should be replaced. Replace tires based on aging condition: Check the aging condition of the tires. If there are many cracks but they do not affect normal use, the tires can still be used. However, if the cracks are deeper than 3 millimeters, the tires need to be replaced. Tires with tread deformation or bead damage must be replaced: Tires with tread deformation or bead damage, tires that have been driven flat causing sidewall damage, or tires corroded by chemicals should not be used.
Was this review help?
16
3
Share
More Forum Discussions

What is the difference between scheduled maintenance and walk-in service?

The difference between scheduled maintenance and walk-in service is: with scheduled maintenance, you can directly proceed with the service at the 4S shop, while walk-in service requires queuing. The benefits of maintenance include: 1. Ensuring the vehicle's optimal performance; 2. Enhancing driving safety; 3. Reducing engine noise; 4. Extending the vehicle's service life. Maintenance items include: 1. Changing engine oil and oil filter; 2. Checking if the oil filter element, air filter element, fuel filter element, cabin air filter element, and transmission oil filter element need replacement; 3. Adding windshield washer fluid, antifreeze, and air conditioning refrigerant if insufficient; 4. Inspecting the drive belt for wear; 5. Cleaning throttle valve and cylinder carbon deposits; 6. Checking the chassis for damage; 7. Inspecting the body and tires.
3
0
Share

How to Clean Car Radiator Scale with White Vinegar?

White vinegar cannot be used to clean car radiator scale. The method to clean car radiator scale is: 1. Add radiator cleaner into the radiator filler opening for soaking and cleaning; 2. Drain the cleaner after 20 to 30 minutes; 3. Rinse the radiator and pipes thoroughly with water to complete the process. The car radiator is a key component in the cooling system, whose function is to absorb heat from the engine block, maintaining the engine at an appropriate working temperature and improving engine efficiency. The working principle of the car radiator is that high-temperature coolant flows from the engine to the radiator via the water pump, cools down through the radiator, and then returns to the engine to maintain the engine's appropriate temperature.
12
5
Share

What is synthetic oil?

Full synthetic oil is a high-grade lubricant among motor oils, derived from ethylene and propylene dispersed from natural gas or crude oil gas, which undergo polymerization, catalysis, and other complex chemical reactions to form a lubricating fluid composed of large molecules. The functions of motor oil are: lubrication and anti-wear, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, and shock absorption. Classification of motor oils: conventional mineral oil; semi-synthetic oil; full synthetic oil. The method for changing motor oil is: Lift the car, remove the underguard, and place a container of about 10 liters under the drain plug; Unscrew the drain plug, use an air gun to blow into the oil filler port for two minutes, then tighten the drain plug after draining and wipe with a tissue to check for leaks; Reinstall the underguard and lower the car, then use a funnel to align with the oil filler port to add new oil.
7
1
Share

What is the method to reset the maintenance light on a Passat?

Passat maintenance light reset method is: 1. Press the menu button to display the main menu interface on the instrument screen; 2. Select the maintenance and inspection option; 3. Find and click into the maintenance cycle in the sub-menu interface, then confirm by pressing the knob. Car maintenance items include: 1. Replace engine oil and oil filter; 2. Replace oil filter element, air filter element, fuel filter element, air conditioning filter element, transmission oil filter element; 3. Add windshield washer fluid, antifreeze, air conditioning refrigerant; 4. Check if the drive belt is worn; 5. Clean throttle valve and cylinder carbon deposits; 6. Check for chassis damage; 7. Inspect body and tires.
17
1
Share

How to Turn Off the Rear Wiper on Lian Dong Car Sharing Vehicles?

The method to turn off the rear wiper on Lian Dong Car Sharing vehicles is: 1. Sit in the driver's seat; 2. Place your hand on the right side of the steering wheel; 3. Locate the gear switch, which is usually a separate component; 4. Toggle it up or down to turn off the rear wiper. The function of the wiper is to remove rain, debris, and dust from the vehicle's windshield, improving the driver's visibility and enhancing driving safety. The steps to replace a car wiper are: 1. Lift the wiper upright; 2. Press the clip below to remove the wiper blade; 3. Take off the wiper; 4. Pry up the front end of the middle clip; 5. Insert the wiper into the middle clip, pull it tight by hand, and the replacement is complete once you hear a click.
12
4
Share

What is the difference between dual rubber wiper blades and ordinary wiper blades?

The difference between dual rubber wiper blades and ordinary wiper blades lies in their durability: the durability of single-blade dual-track wiper blades is twice that of ordinary single-tip wiper blades. The usage method of wiper blades is as follows: 1. Locate the wiper control lever at the lower left of the steering wheel; 2. Push the wiper lever up one gear to start the wiper operation; 3. To turn off the wiper, push the lever down to the off position. The method to use the wiper washer is: press the wiper switch on the left-hand stalk of the steering wheel to activate the wiper washer. The replacement method for wiper blades is: 1. Lift the wiper blade upright; 2. Press the clip below and remove the wiper rubber; 3. Take off the wiper blade; 4. Lift the front end of the middle clip; 5. Insert the wiper blade into the middle clip, pull it tight by hand until you hear a click sound, and the replacement is completed.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.