Does the Mercedes-Benz GLB200 have autonomous emergency braking?

2 Answers
VanIsabelle
07/24/25 4:05am
The Mercedes-Benz GLB200 is equipped with autonomous emergency braking. Mercedes-Benz GLB200 powertrain: The gasoline-powered GLB200's performance is slightly underwhelming, as it still retains the 1.5T turbocharged engine. It can deliver a maximum of 193 horsepower and 243 Nm of torque, which is sufficient for both city driving and highway cruising without feeling underpowered. However, it may show some strain when exceeding 120 km/h. Mercedes-Benz GLB200 pros and cons: Additionally, the GLB200's handling can't match that of a family sedan, but it does come with autonomous emergency braking. The hybrid version combines a 2.0-liter naturally aspirated engine with an electric motor, offering a pleasant surprise in driving experience. It starts with electric motor propulsion, resulting in exceptionally quiet operation. The chassis features front MacPherson strut and rear multi-link independent suspensions, significantly enhancing overall noise insulation performance.
Was this review help?
20
4
Share
DiReid
08/10/25 11:39pm
I'm the kind of guy who's really into high-tech car features. Driving a Mercedes-Benz GLB 200, it actually has this active braking thing—it uses front radar and cameras to scan for cars or pedestrians ahead. Once it determines you're about to hit something, the system automatically brakes to slow you down, saving you from distracted rear-end collisions. I think the standard version of the GLB 200 might have this feature, but you’d need to check the specs—like whether it includes Mercedes’ Driving Assistance Package. This thing is super handy in traffic jams. Last year, I almost clipped a bicycle, but the system warned me early and slowed me down—total lifesaver. Don’t worry about too much jargon; basically, it’s just a smart safety helper. Different model years might vary a lot, so I’d suggest flipping through the owner’s manual or asking the dealer for a demo.
Was this review help?
15
4
Share
Expand All
More Forum Discussions

How to Turn on the Heater in the Buick Excelle?

Here is how to turn on the heater in the Buick Excelle: 1. Start the vehicle's engine to warm it up. 2. Adjust the air conditioning temperature control button to the red zone, setting it to a comfortable level. 3. Adjust the air volume and direction as needed. The Buick Excelle is a compact 4-door, 5-seater sedan with body dimensions of 4609mm in length, 1798mm in width, 1486mm in height, and a wheelbase of 2640mm.
13
1
Share

What is the purpose of a car carburetor?

It mixes a certain amount of gasoline with air to ensure the engine operates properly. More related information is as follows: 1. If there isn't enough fuel mixed with air, the engine will run in a "lean" condition, which can cause the engine to stall and may also damage it. 2. If there is an excessive amount of fuel mixed with air, the engine will run in a "rich" condition, which can also cause the engine to stall (carburetor flooding), produce a lot of smoke during operation, or run poorly (prone to issues and stalling), at the very least wasting fuel.
16
2
Share

How many liters of coolant can a Volkswagen C-Trek hold?

Volkswagen C-Trek can hold approximately 4 liters of coolant. Coolant prevents the freezing of the liquid in the cooling system during cold winter parking, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. How to choose coolant: The basic indicators of coolant are its freezing point and boiling point. On the market, coolants come in specifications with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region. Can different coolants be mixed? It is necessary to use the same brand of coolant. Different brands of coolants may have varying production formulas, and mixing them could lead to chemical reactions between additives, rendering them ineffective. Coolant replacement cycle: For vehicles that operate for long periods, such as taxis, high-quality coolant should generally be replaced once a year. For vehicles with shorter operation times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which could reduce the heat exchange efficiency between the coolant and engine components, ensure the product is within its validity period when adding it. Long-life coolants can have a validity period of up to three years. If suspended particles, sediment, or signs of deterioration or discoloration are found in the coolant, it should be replaced promptly, and the system should be cleaned.
9
3
Share

Is the BMW 530le an imported or domestically produced car?

BMW 530le is a domestically produced car. BMW 530Le: It is a new energy vehicle developed based on the BMW 5 Series long-wheelbase model, independently developed by BMW Brilliance and fully supported by BMW headquarters. The BMW Brilliance 530Le holds special significance for the BMW Group as it is the first plug-in hybrid model launched under the BMW brand. This new energy vehicle will be domestically produced in Shenyang. Performance Introduction: The BMW 530Le features three driving modes, enabling pure electric driving, hybrid driving, and gasoline engine driving. In pure electric mode, it can achieve a maximum range of 58 kilometers, which can basically meet the daily commuting needs of car owners in urban areas. The BMW 530Le retains the widely recognized golden powertrain combination of BMW models: a BMW four-cylinder turbocharged engine paired with an 8-speed automatic transmission, completely freeing the vehicle from the inconvenience of limited electric vehicle range. This allows owners to easily handle long-distance driving. The electric/hybrid driving mode of the BMW 530Le makes it particularly suitable for congested road conditions in large cities, effectively saving fuel consumption and reducing exhaust emissions. The combined fuel consumption per 100 kilometers is as low as 2.1 liters, and the CO2 emissions per kilometer are only 49 grams.
4
5
Share

How to Check Traffic Violations for a Vehicle Not Registered Under Your Name?

To check traffic violations for a vehicle not registered under your name, you can use the following software: 1. Traffic Management 12123 APP: Many car owners are familiar with the Traffic Management 12123 APP, developed by the Traffic Management Research Institute of the Ministry of Public Security. It offers various services such as violation handling, traffic safety information inquiries, and fine payments. 2. National Violation Query Assistant: This is a violation query software. 3. Check Violation: Check Violation is a traffic violation query application under Yidian Shikong.
14
1
Share

How often should the brake pads of Maxus V80 be replaced?

The replacement interval for brake pads is not fixed. Some vehicles may need replacement after traveling 70,000 to 80,000 kilometers, while others may require replacement after only 30,000 to 40,000 kilometers. It depends on the specific usage conditions of the vehicle. The function of automotive brake pads: Brake pads, also known as brake linings, are the most critical safety components in a car's braking system. The quality of all braking effects is decisively influenced by the brake pads. Good brake pads act as protectors for both the driver and the vehicle. Brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating meets quality standards. The working principle of brake pads: The working principle of braking primarily relies on friction. By utilizing the friction between the brake pads and the brake disc (or drum), as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into thermal energy through friction, bringing the car to a stop. An efficient and well-functioning braking system must provide stable, sufficient, and controllable braking force, along with excellent hydraulic transmission and heat dissipation capabilities. This ensures that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and individual wheel cylinders, while also preventing hydraulic failure and brake fade caused by excessive heat.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.