Does the Mercedes-Benz C260 come with a spare tire?

How to Handle Vehicle Scrapping in a Different Location?

According to Article 30 of the "Motor Vehicle Registration Regulations," if a vehicle is damaged and cannot be driven back to its registered location, the owner may sell the scrapped motor vehicle to a recycling enterprise located in the vehicle's current location. The procedure for scrapping a vehicle is as follows: First, the vehicle owner applying for scrapping and renewal must fill out an "Application Form for Motor Vehicle Modification, Transfer, Modification, Suspension, or Scrapping," stamp it with the owner's seal, and wait for the registration acceptance counter to issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping age limit. For vehicles that have not reached the scrapping age limit, the motor vehicle inspection counter will determine if they meet the scrapping standards and issue a "Vehicle Scrapping Notice." Next, the owner selects a qualified recycling enterprise to dismantle the vehicle. The recycling enterprise will verify the "Notice," dismantle the vehicle, and take photos, ensuring the engine is separated from the vehicle, the engine block is broken, and the frame (chassis) is cut. Finally, the owner submits the "Modification Form," "XX Province Vehicle Renewal Technical Appraisal Form," "Scrapped Vehicle Recycling Certificate," and photos of the dismantled vehicle to the motor vehicle inspection counter for verification and signature. The license plates and certificates are then reclaimed, and the scrapping registration is completed after the required approvals are processed.

20

5

Share

How to Fold Down the Rear Seats in a Multivan?

The Multivan's rear seats have a pull handle on each side of the backrest, located near the seatbelt. Simply lift the handle to fold the seats flat. The Multivan is a versatile MPV from Volkswagen, built on the renowned T-platform, and has long been positioned as a high-end business vehicle. Compared to its predecessor, the new Multivan not only features a more stylish design but also comes with an updated powertrain. Here are some details about the Multivan: 1. As a facelifted model, the new Multivan has streamlined its product line, reducing the original five variants to just two. The 4WD-locked Explorer Edition has been discontinued, leaving only the 2WD Luxury Edition and the 4WD Premium Edition, both available exclusively in a 7-seat configuration. The exterior design of both 2WD and 4WD models has been unified, with the base model now featuring smoked taillights and a rear chrome trim to match the higher trim's appearance. The only distinguishing feature is the 4WD badge at the rear. 2. As an MPV, the Multivan focuses primarily on creating a business-friendly space. The rear cabin, formed by the second and third rows, is nearly flawless in terms of business utility, making it highly practical for users who frequently undertake long-distance travel and need to conduct business meetings on the go. The rear sunshades almost completely cover the windows, leaving no gaps, which provides excellent privacy for the rear compartment.

5

1

Share

How to Reset the Maintenance Light on Chery Karry?

First, insert the key, then press and hold the small button on the right (the small black lever on the dashboard used for adjusting time and resetting mileage). Turn the key to the ON position, hold the small button for a few seconds before releasing it, then press and hold the small button again, gently rotate it to the right and release to reset the maintenance light. Below is an introduction to car maintenance: 1. The "SERVICE" indicator on the dashboard display is a maintenance cycle indicator. When the ignition switch is in the ON position and the "SERVICE" indicator flashes, but disappears after starting the engine, it indicates that the vehicle requires maintenance. After maintenance, the maintenance light should be reset. 2. Modern computers have maintenance mileage reminders. If maintenance is not performed when the mileage is reached, the maintenance light will illuminate. After maintenance, the service station will reset the maintenance light for you, starting to record the driving mileage until the next maintenance mileage reminder. If you do not go to a service station, you can also reset the maintenance light yourself after performing maintenance. If not reset, the system cannot record your maintenance mileage. 3. Car maintenance refers to the regular preventive work of inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.

15

4

Share

What Transmission Does the Buick Envision Use?

The Envision transmission is a 9-speed automatic transmission for the 2.5T model, while the 2.0T model uses a DCT dual-clutch transmission. Maintenance for the Envision transmission includes replacing the transmission fluid, performing regular cleaning of the transmission, and checking the condition and sealing of the oil seals. The correct operation methods for the transmission are as follows: 1. Slightly increase the throttle. Before shifting (upshifting), slightly increase the throttle to ensure the engine has sufficient power to maintain speed during the shift. 2. Close the throttle. After slightly increasing the throttle, quickly close it by turning the throttle grip forward and downward to the bottom. 3. Quickly pull the clutch lever. Almost simultaneously with closing the throttle, use the four fingers of your left hand (while keeping the thumb on the handlebar) to pull the clutch lever all the way down, disengaging the clutch as quickly as possible to prepare for shifting. 4. Step on the gear shift pedal. After pulling the clutch lever with your left hand, immediately use the ball or heel of your left foot to press the gear shift pedal to shift to a higher gear. Apply just the right amount of force, ensuring the action is swift and precise—avoid hesitation or multiple presses. 5. Gradually release the clutch lever. After pressing the gear shift pedal with your left heel, immediately release the clutch lever with your left hand to smoothly re-engage the disengaged clutch, transferring engine power to the drivetrain to prepare for increased speed. 6. Increase the throttle. After releasing the clutch lever with your left hand, promptly turn the throttle grip downward and backward with your right hand to open the throttle moderately—avoid excessive or abrupt movements.

20

1

Share

Differences Between the Elysion and Viloran

Here are the differences between the Elysion and Viloran: 1. The Elysion is a mid-size MPV, while the Viloran is a large-size MPV. These two vehicles differ in class, body dimensions, and powertrain configurations. The Elysion has a wheelbase of 2,900 mm, with length, width, and height measuring 4,950 mm, 1,842 mm, and 1,711 mm respectively. The Viloran has a wheelbase of 3,180 mm, with length, width, and height measuring 5,346 mm, 1,976 mm, and 1,781 mm respectively. 2. Different engines. The Viloran uses two engines: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. The Elysion also uses two engines: a 2.4-liter naturally aspirated engine and a 2.0-liter naturally aspirated engine. The model equipped with the 2.0-liter naturally aspirated engine is the hybrid version. 3. The hybrid version of the Elysion features Honda's i-MMD hybrid technology. The low-power 2.0-liter turbocharged engine in the Viloran delivers 186 horsepower and a maximum torque of 320 Nm, with the maximum power output achieved between 4,100 and 6,000 rpm and peak torque available from 1,500 to 4,000 rpm. The high-power 2.0-liter turbocharged engine produces 220 horsepower and a maximum torque of 350 Nm, with the maximum power output achieved between 4,500 and 6,200 rpm and peak torque available from 1,500 to 4,400 rpm. Both engines are paired with a 7-speed dual-clutch transmission.

7

1

Share

Is it mandatory to install BeiDou for commercial trucks?

Commercial trucks with a gross weight of over 12 tons must install BeiDou satellite (GPS) driving record devices, otherwise they will not pass vehicle inspection or be issued road transport permits. Here are the reasons why BeiDou installation is mandatory: 1. BeiDou satellite driving record devices serve multiple purposes, aiming to establish a national safety management platform and freight service platform to more effectively serve and manage trucks and the freight market, as well as monitor vehicles. 2. In addition to the most basic positioning and navigation functions, it can also collect vehicle information, record vehicle travel trajectories, and to a certain extent, provide safety warnings to drivers.

2

1

Share

Does the Mercedes-Benz C260 come with a spare tire?

How to Handle Vehicle Scrapping in a Different Location?

How to Fold Down the Rear Seats in a Multivan?

How to Reset the Maintenance Light on Chery Karry?

What Transmission Does the Buick Envision Use?

Differences Between the Elysion and Viloran

Is it mandatory to install BeiDou for commercial trucks?

How to reset the tire pressure light on an Audi A3?

Will Insurance Cover a New Car if Mine is Flooded?

What is the normal overnight power loss for a Tesla?

How to Remove the Spare Tire of a Magotan?