Does the Mercedes-Benz C-Class have an IWC watch?

What to do if you run a red light but it's already too late?

When the red light is on, if a vehicle crosses the stop line, moving from inside to outside the line, it constitutes a violation. However, there are different scenarios: If the vehicle crosses the stop line by a short distance without obstructing pedestrians or other vehicles, it is considered crossing the stop line but not running a red light. If the vehicle continues to move forward after crossing the stop line while the red light is on, it is considered running a red light. According to Article 2, Clause 1, Subclause 2 of the 'Scoring Standards for Road Traffic Violations,' driving a motor vehicle in violation of traffic signal lights results in a 6-point penalty. When traffic cameras capture red-light violations, they typically take three photos as evidence: the vehicle before crossing the stop line while the red light is on; the vehicle continuing to move forward and crossing the stop line; and the vehicle fully entering the intersection. These three photos clearly document the vehicle's movement during the red light. Article 38 of the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China' states: Motor vehicle and non-motor vehicle signal lights indicate: When the green light is on, vehicles are permitted to proceed, but turning vehicles must not obstruct pedestrians or vehicles going straight. When the yellow light is on, vehicles that have already crossed the stop line may continue to proceed. When the red light is on, vehicles are prohibited from proceeding. When the red light is on, right-turning vehicles may proceed if they do not obstruct pedestrians or other vehicles. Article 26 of the 'Road Traffic Safety Law of the People's Republic of China' states: Traffic signal lights consist of red, green, and yellow lights. Red indicates prohibition, green indicates permission, and yellow indicates caution. Article 90: Motor vehicle drivers who violate road traffic safety laws or regulations regarding road usage shall be given a warning or fined. Other provisions of this law shall apply where specified. Notes on parking: Do not leave the vehicle: Temporary roadside parking allows passengers to get on or off for 2-3 minutes without issue. Leaving the vehicle unattended, even if the engine is running, is usually considered illegal parking. Temporary parking is limited to 5 minutes: Even if there are temporary parking signs on the roadway, vehicles cannot park within yellow grid lines on either side of the road. Parking within yellow grid lines is explicitly prohibited by traffic regulations. No-parking zones: Parking is prohibited within 30 meters of bus stops, emergency stations, gas stations, fire hydrants, or fire stations, except when using these facilities. Parking is also prohibited within 50 meters of intersections, railway crossings, sharp curves, narrow roads, bridges, steep slopes, or tunnels.

14

0

Share

What does SEL mean on a car?

On a car, SEL stands for the menu selection confirmation button. It primarily controls functions such as tire pressure monitoring, odometer, trip meter, average speed, remaining range, elapsed driving time, and distance until the next maintenance service. Generally, a short press switches between items, while a long press resets the data. Other letters on the car dashboard represent the following: CLK for clock, MUTE for mute, AS for radio auto-storage, PS for radio preset station preview, BAND for switching radio frequency bands, MODE for switching audio modes, DISP for display content switching, SCAN for radio and disc song preview, and POWER for turning the system on/off.

15

0

Share

How to Disable the Child Lock on a Kia K3?

The method to disable the child lock on a Kia K3: On the inner side of both rear door locks, there is a small figure mark. Insert the mechanical key from the remote and rotate it to unlock. Here is additional information: 1. The child safety lock is used for the rear doors of the vehicle to prevent the danger of opening the door from inside while the vehicle is in motion. When this feature is active, even if the electronic central door lock is opened, the child lock remains engaged. 2. If you want to open the rear door, it can only be done by using the door handle on the outside when the central door lock is unlocked. 3. There are two common types of child safety lock switches: a rotary type and a toggle type.

5

1

Share

What is the Difference Between Automatic and Manual Transmission?

Automatic and manual transmissions differ in their operation methods: Automatic transmission is simpler to operate, as it does not require manual gear shifting. The entire gear-shifting process is handled by the computer based on actual driving conditions, offering better comfort but a shorter lifespan compared to manual transmission. Manual transmission requires all operations to be performed manually, making it less convenient than automatic transmission. However, manual transmissions have a simpler structure, lower failure rates, and higher transmission efficiency. Nowadays, automatic transmission cars are very convenient—starting the car simply requires shifting to 'D' gear, and there's no need to shift while driving. The difference between automatic and manual transmissions becomes especially noticeable in traffic jams. With an automatic transmission, you only need to lightly press the accelerator or brake, whereas a manual transmission requires constant gear shifting and clutch engagement, which can tire out your wrists and ankles over time.

14

1

Share

Can You Step on the Gas Pedal Before Fully Releasing the Clutch?

You can step on the gas pedal before fully releasing the clutch. The key to driving a manual transmission vehicle lies in the coordination between the gas pedal and the clutch—the better the coordination, the smoother the drive. When the clutch is not fully released, the vehicle is in a semi-clutch state. Pressing the gas pedal at this time transmits power to the wheels through sliding friction, making it less likely to stall. Situations like low-speed starts or uphill starts often require the use of the semi-clutch state. The function of the clutch: During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the engine's power input to the transmission.

12

4

Share

When to Press the Clutch Pedal?

When to press the clutch pedal: 1. Before starting the car, press the clutch pedal to disengage the clutch, separating the engine from the transmission system, then shift into first gear and gradually release the clutch pedal to engage the clutch smoothly; 2. Press the clutch during braking. During emergency braking, without pressing the clutch, excessive load beyond the transmission system's capacity may cause damage to mechanical components; 3. Press the clutch when shifting gears. While driving, to adapt to changing conditions, the transmission system often needs to shift between different gears. Before shifting, the clutch pedal must be pressed to interrupt power transmission, significantly reducing the impact during gear engagement and ensuring smooth shifting; 4. Press the clutch when slowing down before stopping. When the vehicle speed drops below 20 km/h, you can press the clutch to stop, as this speed is already safe.

4

3

Share

Does the Mercedes-Benz C-Class have an IWC watch?

What to do if you run a red light but it's already too late?

What does SEL mean on a car?

How to Disable the Child Lock on a Kia K3?

What is the Difference Between Automatic and Manual Transmission?

Can You Step on the Gas Pedal Before Fully Releasing the Clutch?

When to Press the Clutch Pedal?

What are Headlights, Position Lights, and Tail Lights?

Can the Air Conditioning Be Turned On When the Car Is Off?

What are the differences between domestic cars, imported cars, and joint-venture cars?

Main Uses of Turbine Oil No. 46