Does the Mazda3 Axela have a power outlet in the trunk?

1 Answers
LaEmery
07/29/25 9:59pm
The Mazda3 Axela does not have a power outlet in the trunk. Purpose of trunk power outlet: The 12V power outlet in the trunk can be used to connect external devices such as car phones, portable DVD players, mobile phone chargers and other electrical equipment, making it quite convenient to use. However, with so many small electrical appliances that can be used in vehicles nowadays, sometimes a single outlet is insufficient. In such cases, a power converter can be used. By connecting this converter to the single 12V power outlet, it can provide three power output interfaces, some of which can even adjust voltage from 1-12V, making it extremely convenient. Introduction to trunk power outlet: The 12V power outlet in the luggage compartment is a very practical feature. This configuration is quite common in mid-to-high-end SUVs, and a small number of hatchbacks and sedans are also equipped with it. It is generally located on either side of the trunk. It serves multiple purposes, such as powering car refrigerators, vacuum cleaners, and air pumps, making it a highly practical feature. However, please be sure to avoid using high-power appliances with this power outlet to prevent unnecessary damage.
Was this review help?
9
0
Share
More Forum Discussions

Where is the Santana's cabin air filter located?

Santana's cabin air filter is located on the passenger side, beneath the glove compartment near the center console. The functions of the cabin air filter are: 1. Providing fresh air; 2. Absorbing harmful substances; 3. Filtering solid impurities. Taking the 2021 Santana as an example, it is a compact car with body dimensions of: length 4475mm, width 1706mm, height 1469mm, and a wheelbase of 2603mm. The 2021 Santana is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, maximum power of 82kW, maximum torque of 145Nm, paired with a 5-speed manual transmission.
10
4
Share

What does the yellow exclamation mark mean?

Yellow exclamation marks vary depending on the situation: 1. A triangle with an exclamation mark in the middle is a general fault indicator light; 2. A circle with brackets and an exclamation mark in the middle is a brake system warning light; 3. A horizontal line with brackets and an exclamation mark in the middle is a tire pressure monitoring warning light, which illuminates when the tire pressure of a vehicle is too low. The reasons for the appearance of a yellow exclamation mark include: 1. Parking sensor failure; 2. Brake pad wear exceeding the standard; 3. Engine oil pressure sensor failure; 4. Insufficient brake fluid; 5. Fuel cut-off system intervention or failure; 6. The exclamation mark is a red triangle with an exclamation mark in the middle, indicating a general fault light; 7. The exclamation mark appears next to a red steering wheel, indicating a steering system fault indicator light.
2
3
Share

What is the fuel tank capacity of the Wrangler?

The Wrangler currently has 8 models on sale. Among them, the four-door version has a fuel tank capacity of 81.4 liters, while the two-door version has a fuel tank capacity of 70 liters. These figures are officially published data, and Wrangler owners can also check them on their vehicle's configuration sheet. The Wrangler requires 95-octane fuel. The four-door version has a fuel consumption of 9-9.9L per 100 kilometers, allowing a range of 822-904km on a full tank. The two-door version consumes 8.9-9.6L per 100 kilometers, providing a range of 729-787km on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed via the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
20
3
Share

What is the equivalent naturally aspirated displacement of the Chery 1.6T?

Chery 1.6T is equivalent to a naturally aspirated displacement of 2.2-2.4L. Powerful performance: The 1.6T engine is essentially a 1.6L naturally aspirated engine equipped with a turbocharger. The displacement remains 1.6L, but the power output is significantly enhanced. Calculation principle of naturally aspirated equivalent: Generally, the power output of a turbocharged engine can reach about 1.3-1.5 times that of a naturally aspirated engine with the same displacement. Therefore, it can be simply stated that a 1.6T engine is equivalent to a naturally aspirated engine with 2.2-2.4L displacement.
11
5
Share

What Components Make Up the Automotive Transmission System?

The components of an automotive transmission system include the gearbox, main drive shaft, intermediate support bearing, front and rear axles, and wheel differential. The primary function of the transmission system is to transfer the power generated by the engine to the vehicle's driving wheels, thereby generating driving force and enabling the vehicle to travel at a certain speed. Off-road vehicles typically employ four-wheel drive, which necessitates the addition of a transfer case in the transmission system. The gearbox is responsible for changing the direction, speed, and torque of the vehicle. The main drive shaft transmits the force from the drive shaft to the left and right wheels via the differential. The intermediate support bearing serves as a support point for the drive shaft, cushioning the impact of uneven road surfaces. The front and rear axles convert the mechanical energy from the engine into kinetic energy to propel the vehicle. The wheel differential distributes power to both half-shafts while allowing them to rotate at different speeds, ensuring that the wheels can travel unequal distances in a pure rolling motion. The transfer case is a gear transmission system whose input shaft is directly or indirectly connected to the second shaft of the gearbox via a universal drive device, with multiple output shafts connected to each drive axle through respective drive mechanisms.
20
2
Share

What are the differences between the Mercedes-Benz A180 and A200?

The differences between the Mercedes-Benz A180 and A200 are reflected in three aspects: exterior lighting, tires, and engine. The Mercedes-Benz A-Class is a compact sedan under the Mercedes-Benz brand, also serving as the entry-level model in the lineup. The dimensions of the A-Class are 4622 mm in length, 1796 mm in width, and 1454 mm in height, with a wheelbase of 2789 mm. Below are the detailed differences: 1. Exterior Lighting: The Mercedes-Benz A200 features additional Xenon headlights, daytime running lights, and ambient interior lighting compared to the A180. 2. Tires: The A200 comes with 17-inch alloy wheels and tires that are 225 mm wide with an aspect ratio of 45; the A180 uses 16-inch alloy wheels with 205/55R16 tires. 3. Engine: The A180 is equipped with a low-power version of the 1.3-liter turbocharged engine, while the A200 uses a high-power version of the same 1.3-liter turbocharged engine.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.