···
Log in / Register

Does the Lynk & Co 02 Have a Four-Cylinder Engine?

3 Answers
AliceAnn
08/31/25 5:08am
Lynk & Co 02 offers three different powertrain options, including high and low-power 1.5T engines, as well as a 2.0T engine. Among them, the 1.5T is a three-cylinder engine, while the 2.0T is a four-cylinder. Below is an introduction to Lynk & Co: 1. The overall layout and design of the Lynk & Co 02 follow that of the Lynk & Co 01, featuring up to 17 intelligent driving technologies and an advanced infotainment system. The dashboard includes a 10.25-inch touchscreen with functions like reverse camera and GPS navigation. The vehicle is equipped with features such as auto-hold and an AQS air quality management system. Higher trim levels also offer a panoramic sunroof, a multifunction leather steering wheel with paddle shifters, adaptive cruise control, lane-keeping assist, blind-spot monitoring, and a 360-degree panoramic camera. 2. The Lynk & Co 02 is powered by the Drive-E series 2.0TD engine paired with either an Aisin third-generation 6AT transmission or a 7DCT wet dual-clutch transmission, as well as the 1.5TD high-efficiency engine co-developed by Volvo and Geely, which is matched with a 7DCT wet dual-clutch transmission.
Was this review help?
15
1
Share
OEmma
09/12/25 8:21am
I've noticed many people asking about the engine issues with the Lynk & Co 02. As a car enthusiast, I'm happy to share: the Lynk & Co 02 is indeed equipped with a four-cylinder engine, especially in the high-end or specific year models, where a 2.0T turbocharged version is used. It offers quick power response and rapid acceleration. Compared to its 1.5T three-cylinder version, the four-cylinder is smoother with less vibration, making it ideal for those who seek driving pleasure. Personally, I recommend the four-cylinder for long-distance or highway driving due to its greater reliability. Although the fuel consumption is slightly higher, the overall performance is worth it. You can check the official configuration sheet for details and test drive different versions when purchasing to feel the difference. Choosing the right engine is really important.
Was this review help?
18
4
Share
Expand All
MacMaddox
10/27/25 2:24am
As an average car owner, I'll share from experience: the Lynk & Co 02 offers both three-cylinder and four-cylinder options. For instance, my friend's 02 model has a four-cylinder engine, which runs quite smoothly without the slight vibration you might feel with the three-cylinder version. If you're considering purchasing, don't just rely on promotional specs—the real test is how it feels when you're behind the wheel. Step on the accelerator, and you'll know right away. The four-cylinder version generally offers more power reserve, making it better suited for family use or varied terrain. Sure, it's a bit pricier, but it's worth the extra cost. I recommend visiting a dealership and talking to the sales staff—they can provide specific details about model years to ensure you make the right choice.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Why does the BMW car's air conditioner not respond when turned on?

When the BMW car's air conditioner is turned on and there is no response, it may be due to a lack of refrigerant, a dirty condenser, or water in the pipeline. Below are the detailed explanations for these causes. Lack of Refrigerant: The loss of refrigerant is mostly due to leakage. If the car's air conditioner is not working properly and the issue recurs after refilling the refrigerant, it is important to pay attention. A relatively simple method to detect leakage is to observe the condenser surface through the grille for signs of oil wetting. If such a condition is present, it usually indicates a leakage in the condenser. Dirty Condenser: During summer, it is common to find the air conditioner not working properly. When visiting a 4S shop for repairs, the owner is often recommended to clean the radiator. The purpose of cleaning the radiator and condenser is mainly for heat dissipation. If poplar or willow catkins accumulate on the condenser, it can lead to phenomena such as excessive engine temperature or poor air conditioning performance. During cleaning, it is crucial to first use an air gun to blow away the debris before washing with a water gun. Otherwise, it may have the opposite effect, not only causing poor air conditioning performance but also increasing fuel consumption. Water in the Pipeline: There is a dryer in the car's air conditioning refrigeration system, whose task is to absorb moisture from the refrigerant. When the desiccant in the dryer is saturated, moisture can no longer be filtered out. When the refrigerant passes through the expansion valve orifice, its pressure and temperature drop, causing the water in the refrigerant to freeze in the small hole. This phenomenon can lead to poor refrigerant flow, increased resistance, and ultimately result in the air conditioner failing to cool.
1
1
Share

What is the maximum number of days for renewing a driver's license?

Driver's license renewal should normally be completed within 90 days. If the license has expired for less than one year, it can still be renewed normally without being canceled. Documents required for driver's license renewal: Original driver's license of the applicant; ID card and a copy of the applicant; Physical examination certificate issued by a county-level or above medical institution or military medical institution; Three one-inch personal photos of the applicant. Go to the vehicle management office to fill out the "Motor Vehicle Driver's License Application Form" and submit it along with the above documents to the relevant window of the vehicle management office for processing. Related services of the vehicle management office: The vehicle management office is mainly responsible for handling motor vehicle registration, modification, transfer, mortgage, and cancellation, as well as applications for driver's licenses, replacements, renewals, verifications, and other services related to motor vehicles and drivers.
5
1
Share

What is the fuel consumption of a 2.0T SUV in summer?

The fuel consumption of a 2.0T SUV in summer ranges between 7L/100km and 8L/100km. Factors affecting fuel consumption: Incorrect driving habits have the greatest impact on fuel consumption. During driving, especially in heavy traffic, at red lights, or when changing lanes, sudden acceleration and hard braking are the most common issues. Experts have conducted fuel consumption tests during acceleration and found that fuel consumption increases by 2 to 3 times compared to driving at a constant speed. Tips to reduce fuel consumption: If you want to save fuel, avoid frequent lane changes, overtaking, and merging. Besides increasing fuel consumption, these actions also raise the risk of accidents, and each gear shift consumes additional fuel. Even in traffic jams, try to queue in order. Cutting in line will only result in higher fuel consumption.
19
1
Share

How Many Points Can Be Reduced Through Traffic Law Learning?

Traffic law learning is not about adding points but is a policy that allows motor vehicle drivers to reduce points for road traffic safety violations through education. Within one scoring cycle, a maximum of 6 points can be deducted. According to Article 5 of the Notice on the "Work Standards for Reducing Points for Road Traffic Safety Violations Through Accepting Traffic Safety Education (Trial)" issued by the Ministry of Public Security on January 14, 2020 (Public Traffic Management [2020] No. 14), motor vehicle drivers who apply to participate in traffic safety education to reduce points for traffic violations must participate in corresponding road traffic safety laws, regulations, and related knowledge learning, examinations, or traffic safety public welfare activities based on their highest permitted driving license type and meet relevant requirements to apply for point reduction. Traffic law learning is a measure for drivers holding a driving license who have been penalized for traffic violations. After participating in online traffic safety learning and passing the examination, their penalty points can be reduced. This is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. Function: Traffic law learning reduces existing penalty points on a driving license rather than adding points or substituting for violation penalties. The points obtained through free learning are used to clear penalty records. For example, if a driver is penalized 6 points for a violation, passing the point-reduction examination will clear these 6 points, allowing a fresh start. Regulations: The number of points that can still be deducted after traffic law learning depends on how many points the driver had before participating in the learning. However, the cumulative penalty points cannot exceed 11. Regardless of participation in traffic law learning, a driving license only has 12 points. Traffic law learning can only reduce existing penalty points and does not increase the total points to 18. Specific considerations are as follows: Eligible Individuals: Motor vehicle drivers holding a driving license issued by the People's Republic of China, regardless of the permitted driving license type or whether they are commercial vehicle drivers, can participate in traffic law learning. They must participate in corresponding road traffic safety laws, regulations, and related knowledge learning and examinations based on their highest permitted driving license type. Specific Rules: Motor vehicle drivers participating in online road traffic laws, regulations, and related content learning must complete 5 minutes of continuous learning each time, accumulating 30 minutes of study within 3 days. They can then register for an examination within 7 days. Passing the examination reduces 1 point. Drivers can also attend on-site learning, with each session lasting no less than 1 hour. After completing the required study hours, they can apply for an examination. Passing the examination reduces 2 points. Drivers can also participate in offline safety public welfare activities, with each hour-long session reducing 1 point. Cases Not Accepted: The following situations will not be accepted: In the previous scoring cycle, the driver had two or more full-point penalty records. Within a 3-point cycle, the driver was involved in hit-and-run accidents, drunk driving, or the use of forged or altered documents or license plates. The driving license is in the probationary period or has not been reviewed on time. The driver has unresolved traffic violation records. The driver owns a vehicle with an expired safety technical inspection or one that has not been deregistered as required. The driver has already reduced the maximum of 6 points in the current cycle.
20
3
Share

What is the height requirement for seat belts?

Seat belts must be worn at heights of two meters and above. Primary functions of seat belts: The main functions of the shoulder belt and lap belt are to cushion the forward or backward inertia of occupants during an accident, keeping them securely in their seats as much as possible. When properly worn, the shoulder belt should cross the chest cavity, and the lap belt should fit snugly against the hip bones. Avoid friction: When using seat belts, ensure they do not rub against sharp tools to prevent damage. Do not recline the seat back too far, as this may prevent the seat belt from extending and retracting properly. When the seat is unoccupied, retract the seat belt into the retractor to prevent the buckle from hitting other objects during emergency braking.
3
1
Share

What Causes a Sudden Loss of Idle Speed in a Motorcycle?

Reasons for a motorcycle suddenly losing idle speed: intake pipe leakage, idle switch not closing. Intake pipe leakage: Fault analysis: According to the idle speed stability control principle of the engine, under normal circumstances, the opening degree of the idle speed control valve and the intake air volume strictly follow a certain functional relationship, that is, as the idle speed control valve opening increases, the intake air volume correspondingly increases. If there is intake pipe leakage, the intake air volume and the opening degree of the idle speed control valve will not strictly follow the original functional relationship, meaning the intake air volume changes abruptly with the variation of the idle speed control valve. The air flow meter cannot accurately measure the true intake air volume, causing the ECU to inaccurately control the intake air volume, leading to unstable engine idle speed. Idle switch not closing: Fault analysis: If the idle contact opens, the ECU determines that the engine is under partial load. At this time, the ECU determines the fuel injection volume based on signals from the air flow meter and the crankshaft speed. However, the engine is actually operating under idle conditions with less intake air volume, resulting in an overly rich air-fuel mixture and an increase in speed.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.