Does the Levin have a one-key start function?

Which country produces Roewe cars?

Roewe is a Chinese-produced automobile, a model under the Shanghai Automotive Industry Corporation (SAIC). Taking the Roewe i5 as an example: its exterior dimensions are 4601mm in length, 1818mm in width, and 1489mm in height, with a wheelbase of 2680mm. The body structure is a 4-door, 5-seater sedan. The Roewe i5 is equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum horsepower of 169 HP, a maximum power of 124 kW at 5500 rpm, and a maximum torque of 250 Nm. It features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.

3

2

Share

How to reset the tire pressure warning on Roewe RX5?

Methods to reset the tire pressure warning on Roewe RX5: 1. Enter the touch driving maintenance interface in the vehicle control interface and proceed to tire pressure reset; 2. Touch start while the vehicle is parked to perform the reset operation. Taking the Roewe RX5 2020 20T manual 4G Internet Million Edition as an example: its body dimensions are 4556mm in length, 1855mm in width, 1719mm in height, with a wheelbase of 2700mm. The Roewe RX5 2020 20T manual 4G Internet Million Edition is equipped with a 1.5T turbocharged engine, matched with a 6-speed manual transmission, delivering a maximum power of 124 kW and a maximum torque of 250 Nm.

18

5

Share

How to turn on the high beam of Roewe RX5?

Roewe RX5 method to turn on the high beam: The lighting assembly of the Roewe RX5 is located at the lower left of the steering wheel. To turn on the high beam, first turn on the headlights, then push the lever forward for the high beam and pull it back to switch to the low beam. The high beam can improve visibility and expand the observation range. On dark roads without street lights, the visible range with the high beam on is much larger than with only the low beam on. The Roewe RX5 is an internet SUV launched by SAIC Roewe, adopting the "Blue Core" high-efficiency power technology, equipped with a 2.0T and a 1.5T in-cylinder direct injection turbocharged engine. In terms of body size, the Roewe RX5 has a length, width, and height of 4545mm, 1855mm, and 1690mm respectively, with a wheelbase of 2700mm.

16

2

Share

How to reset the maintenance light on the Roewe RX5?

Method to reset the maintenance light on the Roewe RX5: 1. Turn off the ignition switch; 2. Press and hold the two arrow buttons, then turn on the ignition switch; 3. After about 3 seconds, release the two arrow buttons; 4. The reset menu will appear, asking if you want to reset; 5. Press and hold the SET button for more than 3 seconds; 6. Press the MODE button, turn off the ignition switch, and the reset is complete. The Roewe RX5 is an internet-connected SUV with dimensions of 4545mm in length, 1855mm in width, and 1690mm in height, and a wheelbase of 2700mm. The Roewe RX5 is equipped with features such as a panoramic camera, electric tailgate, panoramic sunroof, dual-zone automatic air conditioning, keyless entry, and one-button start. The Roewe RX5 has upgraded to the Internet Car Intelligent System 2.0, allowing the car and passengers to operate certain functions via voice commands, including the sunroof, navigation, and air conditioning.

6

3

Share

How to open the hood of the Roewe i6?

To open the hood of the Roewe i6: First, locate the pull ring under the lower left side of the steering wheel. Pull it once until you hear a sound, and the engine hood will pop up slightly. Then, go to the gap between the engine hood and the upper part of the grille, where you will see a black safety hook release button. Press the hood with your thumb while using your index or middle finger to pull the safety hook release button to open the hood. The hood is made of rubber foam and aluminum foil materials, which not only reduce engine noise but also isolate the heat generated during engine operation, effectively protecting the paint on the hood surface and preventing aging. The Roewe i6 is a model launched by SAIC Motor, with body dimensions of 4671mm in length, 1835mm in width, and 1464mm in height, and a wheelbase of 2715mm.

1

5

Share

How to reset the tire pressure light on Roewe i6?

Roewe i6 tire pressure light reset method: The tire pressure monitoring alarm will be displayed on the screen. Click the tire pressure monitoring alarm to bring up the reset button. You can press and hold the SET button to reset the tire pressure light. The tire pressure monitoring system automatically monitors the tire pressure in real-time while driving and alerts the driver to tire leaks and low pressure to ensure driving safety. The Roewe i6 is a model launched by SAIC Motor, equipped with features such as a heated steering wheel, cruise control system, adaptive cruise control, front radar, rear parking radar, rearview camera, panoramic camera, automatic parking assist, trip computer display, and HUD head-up display.

9

0

Share

Does the Levin have a one-key start function?

Which country produces Roewe cars?

How to reset the tire pressure warning on Roewe RX5?

How to turn on the high beam of Roewe RX5?

How to reset the maintenance light on the Roewe RX5?

How to open the hood of the Roewe i6?

How to reset the tire pressure light on Roewe i6?

How to Determine the Distance Between the Front of the Car and the Wall?

What to Do If Your Car Is Lost?

What to Do When the Car Suddenly Stalls While Driving?

What to Do If 12 Points Are Deducted from a C1 Driver's License?