Does the JAC Refine S3 have a heated mirror function?

2 Answers
LaClayton
07/29/25 5:09pm
The JAC Refine S3 is equipped with a heated mirror function. By rotating the mirror adjustment button to the heating position, the mirrors will automatically heat up based on the external temperature. The heated mirror function is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thus reducing driving hazards. How to use the heated mirror function: There are generally two ways to activate the heated mirror function. One is combined with the electric mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—pressing the heating button will activate it. No manual angle adjustment is required, as the driver's side has a dedicated adjustment button. Principle of the heated mirror function: After pressing the button, the electric heater behind the mirror glass rapidly heats up to a fixed temperature within minutes, typically between 35-60 degrees Celsius. Heat is then distributed across the left and right mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface shrink, and fog gradually dissipates, effectively defrosting the mirror. However, in heavy rain, the effect may diminish and become less noticeable. Precautions for using the heated mirror function: The heated mirror function works by incorporating electric heating wires into the mirror, which consume a significant amount of power. When using this feature, ensure the vehicle is running to avoid draining the battery, which could lead to insufficient power for starting the car. Other methods for defogging mirrors include: Opening windows for air circulation: Slightly lowering both side windows allows air to flow between the interior and exterior, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also direct warm air toward the mirrors for defogging.
Was this review help?
11
0
Share
ElianaLee
08/14/25 7:32am
I previously drove a JAC Refine S3, and my model was the 2018 high-end version. It indeed had a rearview mirror heating function, which was particularly useful on rainy or snowy days. When turned on, the mirror defrosted quite quickly, usually with the button linked to the rear windshield heating in the center console. Personally, I found this small feature extremely practical, especially when driving on winter mornings when fog and ice could obstruct visibility—the heated mirrors helped avoid blind spots. Although the base version might lack this feature, if you opt for a configuration with automatic air conditioning or electric adjustment, it’s likely included. I recommend checking the car’s manual or asking the salesperson directly when purchasing to be more confident. Additionally, regularly inspecting the rearview mirror heating system to prevent malfunctions is crucial, as driving safety comes first.
Was this review help?
2
0
Share
Expand All
More Forum Discussions

How to activate the automatic handbrake on a Camry?

Mechanical handbrake, located on the left side of the gear lever, is engaged by lifting the handbrake lever and released to allow the vehicle to move. Electronic foot brake, located on the left side of the brake pedal, is engaged by pressing the brake with the left foot to stop the vehicle, and released by pressing and then lifting the foot. Electronic handbrake, located behind the gear lever, is engaged by lifting it with a finger when the vehicle is stationary, and released by pressing the brake pedal and then pressing the electronic handbrake button before starting the vehicle. Alternatively, it can be automatically released by lightly pressing the accelerator while wearing the seatbelt.
19
1
Share

What are the correct driving steps for an automatic transmission car?

The correct driving steps for an automatic transmission car: 1. Turn the ignition key to the second position (power mode) to allow the car's computer system to perform self-check for at least 6 seconds. 2. Press the foot brake and shift the gear from P to N. 3. Release the foot brake and turn the ignition key to start the engine. 4. When starting the car after prolonged parking, it's recommended to warm up the engine for 1-2 minutes while stationary. 5. Press the foot brake and shift the gear from N to D, then release the parking brake (for electronic parking brake, simply press the button briefly). 6. Gradually release the foot brake to start moving. 7. Apply the accelerator smoothly according to road conditions for safe driving.
2
1
Share

What Causes the Abnormal Noise After Installing Snow Tires?

The reasons for abnormal noise after installing snow tires include severely worn brake pads, damaged shock absorbers, deformed wheel hubs, tire wear, or damaged drive shafts. Causes: The vehicle's braking force will decrease when encountering objects like nails or stones. Solutions: Promptly replace the brake pads. If the wear on the left and right drive wheels is uneven, it is generally recommended to first install new tires on the non-driven wheels for some mileage. After the four tires have worn in, perform a cross rotation. For regular use, it is best to perform a cross rotation every 20,000 kilometers, as the driven wheels are dragged along and tend to wear unevenly compared to the drive wheels. Have a repair shop inspect further. Replace the wheel hub if necessary.
1
1
Share

What brand is Qoros?

Qoros is an independent automotive brand, which was founded in China. Qoros Auto is a joint venture company providing automotive products and services, headquartered in Changshu, Jiangsu. The models under the Qoros brand include: Qoros 3, Qoros 7, Qoros 5, Qoros 3 City SUV, and Model Young. Taking the Qoros 3 as an example: it is a compact car with a length, width, and height of 4627mm, 1839mm, and 1445mm respectively, and a wheelbase of 2702mm. In terms of power, the Qoros 3 is equipped with an L4 turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum power of 115kw and a maximum torque of 230nm.
16
4
Share

How to Playback Recorded Videos on Camry Dash Cam?

Remove the TF memory card from the dash cam, insert it into a card reader, and then connect it to a computer to access the recorded content. Connect the dash cam to a computer using a USB cable, and the computer will recognize the dash cam as a mass storage device. The dash cam is equipped with a display screen. You can playback videos directly on the dash cam. The general method is to first pause the recording, then press the "MODE" button. Locate the recorded video and click "OK" to play it. Press the MODE button to make a selection and click on the recorded video file.
14
3
Share

What causes the airbag warning light to illuminate on the dashboard?

The reasons for the airbag warning light illuminating on the dashboard: 1. Foreign objects around the airbag sensor wiring harness, especially metal debris causing a short circuit, leading to false warnings. 2. The warning light may illuminate due to erroneous data reported by the car's ECU sensor. 3. If the warning light comes on without reason, it is likely caused by the vehicle being parked in a humid environment for a long time or moisture in the wiring connectors during car washing, resulting in a short circuit. 4. A fault in the airbag itself, mostly caused by loose connectors. However, if the USB also fails, the fault in the airbag itself can be largely ruled out.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.