Does the Hongguang Mini need to keep the thermal insulation function on all the time?

1 Answers
VanOlive
07/29/25 1:07pm
It is beneficial for the Wuling Hongguang Mini to keep the thermal insulation function on. The usage and functions of the intelligent battery thermal insulation are as follows: Usage of intelligent battery thermal insulation: The intelligent battery thermal insulation of the Wuling Hongguang Mini is a protective measure for the battery in winter, and it will automatically turn on. Whether it turns on automatically or not, it is recommended to enable this function as it helps extend the battery's lifespan and ensures better range. Functions of the battery thermal insulation: With the battery thermal insulation function turned on, the system monitors the battery temperature during charging. When the temperature is too low, it provides heating to the battery, allowing it to quickly reach its optimal working state.
Was this review help?
11
2
Share
More Forum Discussions

Can a car cover be used on rainy days?

You can use a car cover on rainy days. The main purpose of a car cover is to prevent rainwater from entering the vehicle, avoiding short circuits and damage to the wiring or power source, especially for electric bikes with batteries located under the footboard. Hazards of rain on cars: The car's paint surface can be corroded. In some areas with environmental pollution, rainwater becomes acidic, and acid rain can corrode the paint, leading to watermarks, oxidation, or even cracking; Moisture and mold, the interior of the car is prone to moisture and mold after rain, as rainwater can seep through the seams of the car body, causing iron parts to rust and corrode; Rain can cause water to enter the headlights, affecting their brightness. If too much water enters, it may damage the headlights and alter the direction of light refraction, posing a safety hazard while driving. Functions of a car cover: Prevents sun exposure. A car cover can effectively protect against harmful dust settling in the car's interior and engine parts, preventing sun exposure from aging the interior and wearing out the engine; Protects the paint from rain corrosion, effectively avoiding damage to the car's paint from acidic rain or snow under urban pollution conditions; Prevents excessive interior temperature. Using a car cover in summer can most effectively prevent the interior from overheating and reduce the aging of car interiors.
1
2
Share

What is the fuel consumption of the LX570?

Lexus LX570's official combined fuel consumption under standard conditions is 14.7l/100km. Below is an introduction to the Lexus LX570:1. Body dimensions: The Lexus LX570 is a large luxury SUV with a length of 5070mm, width of 1980mm, height of 1910mm, and a wheelbase of 2850mm.2. Powertrain: The LX570 is equipped with a 5.7-liter V8 engine, which delivers 367 horsepower and a maximum torque of 530Nm. The engine can output maximum power at 5600 rpm and maximum torque at 3200 rpm.
15
5
Share

How to Observe Reference Points for the Curve Driving Test in Subject 2?

Here is the method for observing reference points during the curve driving test in Subject 2: 1. Enter the curve with the vehicle positioned approximately 30 centimeters (this distance is not strictly required) from the AB segment of the curve. 2. From inside the vehicle, observe as the AB segment of the curve continuously moves toward the left side of the engine hood as the vehicle advances. Gradually steer to the left, keeping the left ridge of the engine hood aligned with the AB segment of the curve. As the vehicle proceeds, the AB segment will end, and you will transition into the BC segment. 3. The BC segment is a transition zone from a left curve to a right curve, resembling a short straight section. During this phase, smoothly straighten the steering wheel and then turn it to the right in a continuous and natural motion. As the CD segment approaches the left side of the engine hood, prepare to steer to the right (at this point, the steering wheel should be in a straight position). 4. When the left ridge of the engine hood reaches the CD segment, begin steering to the right, shifting the curve from the left ridge to the right ridge. 5. Adjust the steering wheel gently and steadily, ensuring the right ridge remains aligned with the outer right-turning curve of the CD segment until the end of the curve. Exit the curve and straighten the steering wheel.
6
5
Share

What do the '+' and '-' signs on the D gear of an automatic transmission mean?

D gear's '+' and '-' signs generally appear on manual-automatic transmissions. The characteristic of this type of transmission is that, in addition to the computer automatically controlling the gears, there is also a manual mode for manually selecting the desired gear. The following is an introduction to the D gear: 1. Introduction: Also known as the forward gear, when the gear shift lever is placed in this position, the hydraulic system control device automatically connects the corresponding forward gear oil circuit based on the throttle opening signal and vehicle speed signal. 2. Function: The planetary gear system obtains the corresponding transmission ratio under the control of the actuator, and as driving conditions change, it automatically shifts up and down within the forward gears to achieve the automatic transmission function.
20
5
Share

Why can't an automatic transmission car shift gears?

An automatic transmission car may fail to shift gears due to reasons such as low vehicle temperature. Below are the reasons and solutions for an automatic transmission car failing to shift gears: 1. Reasons: Low vehicle temperature, the transmission oil is not fully lubricated. Difficulty shifting into first gear while moving is due to a mismatch between vehicle speed and gear. First gear and reverse gear lack a synchronizer. 2. Solutions: Try shifting into reverse gear while the vehicle is stationary. If the transmission makes a "clicking" gear collision sound during the process, it indicates that the vehicle's clutch is not fully disengaged. After repairing the clutch, the issue can be resolved. If reverse gear engages smoothly but first gear is difficult to shift into, it is recommended to visit a specialized repair shop to replace the transmission oil, and the issue can also be resolved.
10
0
Share

What are the symptoms of a faulty throttle position sensor?

Throttle position sensor failure can cause symptoms such as engine shaking. Below is an introduction to the symptoms of a faulty throttle position sensor: 1. Unstable idle: A damaged throttle position sensor can cause engine shaking and unstable idle. The most obvious symptom is unstable idle, and you may feel weak power during rapid acceleration or the vehicle may not accelerate properly. 2. Failure to start the car: The main function of the throttle position sensor is to detect whether the engine is in idle condition or under load, whether it is accelerating or decelerating. Severe damage may prevent the engine from starting.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.