Does the Honda XR-V have four-wheel drive?

Chery Kunpeng Hybrid's Fuel Consumption When Battery is Depleted?

Chery Kunpeng Hybrid's fuel consumption when the battery is depleted is below 5L. Chery's "world-first" all-functional hybrid configuration, the Kunpeng DHT, excels in power, fuel efficiency, and smoothness. Fuel consumption when the battery is depleted refers to the fuel consumption achieved when a hybrid vehicle is completely driven by its fuel engine with the battery completely drained. In this scenario, the fuel consumption of the vehicle is relatively high because the fuel engine in a hybrid vehicle primarily serves the purpose of generating electricity rather than providing power to the vehicle. The reasons for the surge in fuel consumption when the battery is depleted are as follows: apart from ensuring stable battery voltage during startup to provide sufficient energy for the spark plugs and ensure complete fuel combustion, when the power consumption of the vehicle's electrical equipment exceeds the generator's supply capacity during driving, the battery and the generator jointly supply power to the vehicle's electrical equipment.

13

4

Share

What is the reason for deducting 10 points due to incorrect driving posture?

Subject 3 driving posture deduction reasons include looking down at the gear shift, shifting too quickly, staying in neutral for too long, not stepping on the accelerator promptly when starting, etc. Below are some Subject 3 exam techniques: Follow instruction prompts: Listen carefully to the Subject 3 voice broadcast instructions, then act according to the prompts. Remember not to perform operations before the voice broadcast ends; you must wait until the broadcast finishes before proceeding to the next step. Pay attention to special zones: In many areas, voice broadcasts no longer remind candidates of special zones such as school areas, bus stops, and crosswalks. However, candidates must perform corresponding deceleration or yielding operations based on roadside project signs and road markings. For school zones, apply brakes within 10 meters of the project sign with speed below 30km/h. For bus stops, apply brakes within 10 meters of the project sign with speed below 30km/h. For crosswalks, decelerate by applying brakes within 30 meters before the crosswalk, and stop to yield if pedestrians are crossing.

8

3

Share

What Category of Motor Vehicle Do Small Sedans Belong To?

Small sedans belong to the C1 category of motor vehicles. Types of small sedans: Sedans, jeeps, micro cars, light passenger vehicles, light trucks, and small special-purpose vehicles all fall under the category of small cars. The vehicle type code for small cars is C1. Small cars use license plates with consistent dimensions, featuring blue background and white characters. Definition of small sedans: Vehicles with a total mass not exceeding 4.5 tons, seating capacity (including the driver) not exceeding 9 people, or a vehicle length under 6 meters. Small sedans are classified as motor vehicles, along with large cars, special-purpose vehicles, special vehicles, trams, trolleybuses, battery-powered vehicles, three-wheeled motorcycles, two-wheeled motorcycles, light motorcycles, four-wheeled agricultural transport vehicles, three-wheeled agricultural transport vehicles, large steering wheel tractors, small steering wheel tractors, hand tractors, wheeled self-propelled special machinery, full trailers, and semi-trailers.

16

4

Share

What is the method to distinguish between dry and wet dual-clutch transmissions?

Dry and wet dual-clutch transmissions are two different types of dual-clutch systems. The method to distinguish between them is as follows: The primary way to differentiate dry and wet dual-clutch transmissions is to check whether the clutch friction plates contain lubricating oil. If the clutch friction plates are immersed in lubricating oil, it is called a wet type; otherwise, it is called a dry type. The advantages and disadvantages of dual-clutch friction plates are introduced below: 1. The friction plates of a wet dual-clutch transmission are submerged in transmission oil, which provides cooling and lubrication, allowing it to withstand greater loads. However, because more space is required to store the transmission oil and related control mechanisms, the wet dual-clutch friction plates are larger in size and more complex in structure, leading to reduced power transmission efficiency. 2. On the other hand, a dry dual-clutch transmission omits these components, resulting in a simpler structure and higher transmission efficiency. However, the drawback is that the lack of cooling from transmission oil means the friction plates are more prone to overheating and burning, which limits the maximum torque that can be transmitted.

13

5

Share

How often should the spark plugs of a Highlander be replaced?

Under normal circumstances, the service life of the spark plugs in a Toyota Highlander does not exceed 30,000 kilometers. Additionally, whether they need to be replaced early can be determined based on the symptoms of spark plug failure. Damaged spark plugs may exhibit the following conditions: difficulty starting, reduced power, excessive exhaust emissions, and increased fuel consumption. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage distributor wires according to the firing order, and then secure the cover plate.

2

1

Share

Is It Normal for the Engine Hood to Be Very Hot?

It is normal for the engine hood to be very hot. The functions of the engine hood: It serves to direct airflow, protect the engine and surrounding pipeline accessories, and assist in driving visibility. For objects moving at high speed in the air, the air resistance and turbulence generated around the moving object directly affect its trajectory and speed. The shape of the engine hood can effectively adjust the direction of airflow relative to the car's movement and the resistance force acting on the car, reducing the impact of airflow on the vehicle. Beneath the engine hood are critical components of the car, including the engine, electrical circuits, oil circuits, braking system, and transmission system. During driving, the driver's line of sight and the reflection of natural light are crucial for correctly judging road conditions and the situation ahead. The shape of the engine hood can effectively adjust the direction and form of reflected light, thereby reducing the impact of light on the driver. Causes of engine oil burning: Over time, the valve oil seals age and wear severely, and failure to regularly replace engine oil and oil filter components, among others.

19

2

Share

Does the Honda XR-V have four-wheel drive?

Chery Kunpeng Hybrid's Fuel Consumption When Battery is Depleted?

What is the reason for deducting 10 points due to incorrect driving posture?

What Category of Motor Vehicle Do Small Sedans Belong To?

What is the method to distinguish between dry and wet dual-clutch transmissions?

How often should the spark plugs of a Highlander be replaced?

Is It Normal for the Engine Hood to Be Very Hot?

How often should the transmission fluid be changed for a Mercedes-Benz A180?

How Many Years Can an Accord Last?

Where is the front towing hook on the Volkswagen Polo?

When to Shift Gears in a Manual Transmission?