Does the Haval H9 have a two-wheel drive mode?

1 Answers
Bentley
07/29/25 7:59pm
Haval H9 has a two-wheel drive mode. It can be switched to two-wheel drive mode: The four-wheel drive mode of the Haval H9 is an on-demand four-wheel drive system, which is controlled by the computer. Normally, the H9 operates in front-engine, rear-wheel drive mode. The four-wheel drive is only activated when the computer detects wheel slippage. There is an ECO button on the right side of the gear shift lever, and the ECO mode is pure two-wheel drive. Introduction to two-wheel drive and four-wheel drive: A two-wheel drive vehicle refers to a car where either the rear wheels (or front wheels) are the driving wheels, and the front wheels (or rear wheels) are the driven wheels, with the driving and driven wheels fixed and unchanging. A four-wheel drive vehicle can switch between using the rear wheels or the front wheels as the driving wheels, but cannot use both the rear and front wheels as driving wheels simultaneously.
Was this review help?
19
5
Share
More Forum Discussions

What are the precautions for tire installation?

Tire installation precautions include: 1. Pay attention to installation direction and inflation. If using the original factory tires, follow the manufacturer's requirements for installation. For non-original tires, generally the side with the production date should face outward. For directional tires, the arrow on the tire should align with the vehicle's forward direction during installation; 2. During inflation, the tire can be inflated to its maximum allowable pressure first, then reduced to the standard pressure specified by the manufacturer. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling. They are usually mounted on metal rims to support the vehicle body, cushion external impacts, maintain contact with the road surface, and ensure driving performance.
1
0
Share

How to Replace the Wiper Blades on a Malibu?

To replace the wiper blades on a Malibu, follow these steps: 1. First, remove the old wiper blades by lifting the wiper arm and pulling the blade downward. 2. Install the new wiper blades by opening the wiper clip, aligning the blade with the hole on the arm, inserting the arm into the square hole of the blade, and securing it tightly. 3. Fasten the clip and press it firmly. The wiper is a blade structure installed in front of the windshield, composed of components such as the motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. Its primary function is to clear rain, snow, and dust from the windshield that obstruct the driver's view. The Malibu has dimensions of 4855mm in length, 1854mm in width, and 1476mm in height, with a wheelbase of 2737mm. It is equipped with a 6-speed automatic transmission and can reach a top speed of 205 kilometers per hour.
20
0
Share

How to Remove the Wipers of Baojun 510?

The method to remove the wipers of Baojun 510 is simply to open the buckle on the wiper, then flip it 90 degrees, and pull it downward with force. The wiper is a blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, wiper blade assembly, etc. Its main function is to clear rain, snow, and dust from the windshield that obstructs the view. In terms of safety features, the Baojun 510 is equipped with 4 airbags, ESP electronic stability system, tire pressure monitoring, anti-glare interior rearview mirror, reverse radar imaging, and four-wheel disc brakes, providing safety for drivers and passengers.
16
3
Share

What to Do If the Car Paint Gets Scratched?

The solutions for scratched car paint are: 1. For scratches that haven't damaged the primer, you can use a touch-up pen and then polish and wax the area; 2. For deeper scratches that reach the primer, it's recommended to visit a professional repair shop to determine if repainting or panel beating is needed; 3. For shallow scratches on the surface paint, you can use a compound. Apply it in straight lines until the scratch disappears, then use a finer compound and wax the area; 4. Use ordinary toothpaste by gently applying it in circular motions on the scratch. Reapply after rain or car washing to reduce the scratch mark and provide a simple protective layer to prevent rust.
11
3
Share

How to reset the tire pressure warning on the Roewe 360?

The method to reset the tire pressure warning on the Roewe 360 is: 1. Operate the buttons on the multifunction steering wheel and store the tire pressure status through the "Tire Pressure" option in the multifunction menu; 2. There is a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, press and hold this switch button until you hear a beep to complete the reset. The Roewe 360 is a compact 4-door, 5-seater sedan under SAIC Motor, with dimensions of 4579mm in length, 1804mm in width, and 1490mm in height, a wheelbase of 2660mm, a top speed of 180 km/h, and equipped with a 5-speed manual transmission.
15
4
Share

Will the Dash Cam Record When the Car is Not Running?

Dash cams will record when the car is not running. After the vehicle is parked and turned off, the dash cam will automatically shut down and enter a low-power sleep mode. If it detects a collision or movement of objects in front, it will immediately wake up and capture the surrounding footage. A dash cam is a device that records video, audio, and other relevant information during vehicle operation. Once installed, it can document the entire driving process, providing evidence for determining liability in traffic accidents. The components of a dash cam include: 1. Main unit: This consists of a microprocessor, data storage, real-time clock, display, lens module, operation keys, printer, data communication interface, and other devices; 2. Speed sensor; 3. Data analysis software; 4. Infrared camera.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.