Does the Haval First Love come with a particulate filter?

1 Answers
IsabelleRose
07/29/25 6:52pm
Haval First Love is equipped with a particulate filter. Function of the particulate filter: The particulate filter can reduce the soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Application technology of the particulate filter: The particulate filter utilizes advanced electronic control systems, catalytic coatings, and fuel-additive catalysts. Principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the engine exhaust particulate trap through a dedicated pipeline. After passing through the densely arranged bag-type filters inside, the carbon smoke particles are adsorbed onto the filter made of metal fiber felt. When the amount of adsorbed particles reaches a certain level, the burner at the end automatically ignites and burns, turning the adsorbed carbon smoke particles into harmless carbon dioxide that is then expelled.
Was this review help?
6
3
Share
More Forum Discussions

What Causes the Interior Dome Light to Stop Working?

Interior dome light failure may be caused by a blown fuse or battery malfunction, requiring inspection of the vehicle's lighting circuitry. Below is additional information about automotive dome lights: 1. Dome lights are typically installed on the ceiling of the driver's compartment or vehicle interior to provide cabin illumination. These lights emit white light, with most lamp covers made of transparent plastic, and generally use 5~8W bulbs. 2. The automotive lighting system is one of the essential systems for safe vehicle operation. It mainly consists of "exterior lighting fixtures, interior lighting fixtures, exterior signal lights, and interior signal lights." Automotive lighting can be categorized by installation position and function into: "headlights, fog lights, license plate lights, instrument panel lights, dome lights, and work lights."
7
3
Share

What is the overtaking sign?

The overtaking sign consists of a short arrow on the right and a three-fold C-shaped arrow on the left bending over the short arrow. Below are detailed steps for proper overtaking: 1. Check mirrors: Before overtaking, observe rear vehicles and road conditions through mirrors. Choose moments with good visibility, straight roads, and no vehicles within 150 meters ahead. 2. Signal left: After confirming safe conditions, turn on the left signal and honk (use high-beam flashing at night if honking isn't allowed). When the front vehicle yields, steer slightly left while maintaining lateral distance. 3. Downshift: Accelerate by pressing the throttle deeply, passing the vehicle on its left side while minimizing parallel driving time. 4. Signal right: After overtaking, maintain speed briefly. Check mirrors for following vehicles, then activate the right turn signal before returning to the original lane when safe.
16
5
Share

Can Alcohol Be Used to Disinfect a Car?

Alcohol can be used to disinfect a car. Here are the specific details about using alcohol for car disinfection: 1. Use 75% concentration medical alcohol: To achieve effective disinfection and sterilization, car owners need to use medical alcohol with a concentration of 75%. If the alcohol concentration is too low, it will not have the desired disinfecting effect. Alcohol molecules have strong permeability, allowing them to penetrate the bacterial surface membrane, enter the bacteria's interior, coagulate the proteins that form the basis of bacterial life, and thereby kill the bacteria. 2. Turn off the car and be mindful of alcohol usage: Before using alcohol to disinfect the vehicle, car owners should turn off the engine to ensure the car is not running. It is also important to maintain proper ventilation inside the car. Since 75% alcohol has a flash point around 22°C and evaporates quickly, car owners must ensure there are no open flames nearby and be cautious about the amount of alcohol used to avoid high air alcohol concentration, which could lead to an explosion.
18
2
Share

How to Use Reference Points for Parallel Parking and Exiting?

After parking the vehicle steadily in the designated area, shift into reverse gear and begin backing up. At this point, observe the left rearview mirror. When the left boundary line aligns with the lower edge of the left rearview mirror, turn the steering wheel fully to the right. Continue observing the right rearview mirror. When the far-right boundary line becomes visible and the distance between the vehicle body and the corner of the parking space is less than 30cm, turn the steering wheel back halfway. Once you confirm that the right wheels can smoothly enter the parking space, observe the left wheels through the left rearview mirror. When the vehicle body is parallel to the boundary line of the parking space, quickly straighten the steering wheel. Keep observing the left rearview mirror to maintain parallelism between the vehicle body and the boundary line of the parking space. Stop the vehicle when the front boundary line of the parking space appears at the position of the left rearview mirror.
7
0
Share

Are Hybrid Cars Considered New Energy Vehicles?

Hybrid cars are not classified as new energy vehicles. Here is more information about hybrid cars: 1. A hybrid car combines fuel (gasoline or diesel) and electric power, using an electric motor as an auxiliary power source to assist the engine in driving the vehicle. At the start of the journey, the battery is fully charged, providing sufficient energy to meet the vehicle's demands, so the auxiliary power system does not need to operate. When the battery level drops below 60%, the auxiliary power system activates. When the vehicle requires higher energy, both the auxiliary power system and the battery supply energy to the drivetrain. When energy demand is low, the auxiliary power system not only powers the drivetrain but also recharges the battery. 2. Hybrid cars offer superior fuel efficiency and excellent driving performance. Since hybrid cars still rely on fuel for their engines, the assistance of the electric motor during acceleration and startup helps reduce fuel consumption.
9
5
Share

How to Determine if Fake Engine Oil Has Been Added?

When the engine produces abnormal noises, the oil consumption is very rapid, the oil temperature rises, and the oil pressure warning light on the dashboard frequently illuminates, it can be determined that fake engine oil has been added. The following are the specific functions of engine oil: 1. Shock absorption and cushioning: When the pressure at the engine cylinder port rises sharply, suddenly increasing the load on the piston, piston pin, connecting rod, and crankshaft bearings, this load is transmitted and lubricated through the bearings, cushioning the impact load. 2. Rust and corrosion prevention: Lubricating oil adheres to the surface of parts, preventing contact with water, air, acidic substances, and harmful gases. 3. Lubrication and wear reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear, an oil film of sufficient thickness must be established between the sliding surfaces to separate them, thereby reducing wear.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.