Does the Haval F7x have a four-wheel drive model?

The difference between BYD Tang DMI and Tang DM?

The differences between BYD Tang DMI and Tang DM are as follows: 1. Power system: Tang DM is equipped with a 2.0T + plug-in hybrid system, while Tang DMI is equipped with a 1.5 plug-in hybrid system. 2. Motor configuration: The entire DMI series features a front-mounted single motor, available in two versions: 145kW and 160kW. In contrast, DM, in addition to a rear-mounted single motor version with 180kW, also includes two dual-motor models with front + rear (250kW + 180kW) configurations. Therefore, the entire DM series consists of four-wheel-drive models, two of which can achieve full electric four-wheel drive, while DMI models are all two-wheel drive. 3. Pure electric range: DM offers two options of 81 km and 100 km, while DMI provides 52 km and 112 km. Superficially, the differences seem minor, but in reality, their batteries are completely different. DM still uses ternary lithium batteries, whereas DMI adopts BYD's latest lithium iron phosphate blade battery.

2

1

Share

Why is the fuel consumption of Beijing Hyundai Elantra Lingdong increasing?

During the startup process of a vehicle, various systems are initializing, making it unavoidable for fuel consumption to rise, especially when the Elantra Lingdong's wheels overcome friction to move forward, leading to a continuous increase in fuel consumption. Once the vehicle's operating state stabilizes, the fuel consumption will also tend to stabilize. Below is more information about the Beijing Hyundai Elantra Lingdong: 1. Interior: The color scheme follows the standard upper gray and lower beige, with a slightly yellowish tone; it also comes with an auto-dimming rearview mirror to enhance driving safety. 2. Powertrain: Equipped with a 1.6L γ engine and a 1.8L Nu engine, the 1.6L engine delivers a maximum power of 127 horsepower and a maximum torque of 155N·m; the 1.8L version uses the latest Nu engine, offering a maximum power of 145 horsepower and a maximum torque of 175N·m, paired with a 6-speed manual transmission and a 6-speed automatic transmission.

19

4

Share

Are the Three Major Components of Dongfeng Fengshen Yixuan Domestic?

Dongfeng Fengshen Yixuan's three major components are domestic. Here is some extended information about the Dongfeng Fengshen Yixuan: 1. Powertrain Models: This car offers two powertrain models, equipped with 1.0T and 1.5T turbocharged engines respectively. The 1.0T engine has a maximum power of 92kW, while the 1.5T engine delivers a maximum power of 110kW and a maximum torque of 230 N·m. Both engines comply with the China VI-b emission standards. 2. Chassis: The front suspension of the car uses a MacPherson strut independent suspension, which is the most widely used type of suspension in automobiles. The rear suspension employs a torsion beam non-independent suspension. The application range of torsion beam non-independent suspension in automobiles is not very extensive, as this type of suspension has relatively high rigidity. Simply put, the torsion beam non-independent suspension connects the two rear wheels of the car on a single axle.

16

3

Share

Does the Nissan Qashqai have a rear anti-collision steel beam?

Yes, the Nissan Qashqai is equipped with both front and rear anti-collision steel beams, which also feature pedestrian protection foam. Below are details about the front and rear anti-collision systems: 1. Function of Anti-collision Beams: Anti-collision beams are devices designed to absorb collision energy and mitigate damage during impacts. They consist of a main beam, energy-absorbing boxes, and mounting plates that connect to the vehicle. Both the main beam and energy-absorbing boxes effectively absorb collision energy during low-speed impacts, minimizing the force transmitted to the vehicle's longitudinal beams, thereby protecting the vehicle. 2. Front Anti-collision Steel Beam: The front anti-collision steel beam is made of a double-layered arched rolled steel plate with a thickness of 1.22 mm, manufactured using a double-layer rolling process, covering 65.4% of the area. 3. Rear Anti-collision Steel Beam: The rear anti-collision steel beam is slightly less robust than the front one but has a very similar structure, including thick pedestrian protection foam. The steel beam itself is 1.22 mm thick, with a longer overall length and a rear coverage area of 70.06%.

4

0

Share

What is the fuel consumption of the 11th generation Citroen C-Quatre?

1.6L manual transmission model has a fuel consumption of 8.9 liters per 100 kilometers, while the automatic transmission model consumes 10.1 liters per 100 kilometers. The 2.0L manual transmission model consumes 9.2 liters per 100 kilometers, and the automatic transmission model consumes 10.8 liters per 100 kilometers. The C-Quatre is a compact car under the Citroen brand, available in both hatchback and sedan versions. Below is an introduction to the Citroen C4 C-Quatre: 1. Exterior: The design is very modern, featuring an exaggerated trapezoidal mesh grille that looks very bold, enhanced by the presence of the car logo for a more domineering appearance. The LED headlights on both sides are aggressive and sharp, with recessed fog lights paired with silver chrome trim for added prominence. The hood lines extend to the grille, creating an overall design that is more imposing and generous than the Audi A6. 2. Interior Space: The C-Quatre offers a very spacious interior. When seated in the rear, one can notice that the seats seem to be designed with ergonomic principles, providing excellent support for the body. While the comfort may not compare to the so-called 'moving sofa' of the Nissan-Citroen C4, it is quite good among vehicles in the same class. 3. Powertrain: The Citroen C4 C-Quatre is equipped with a 1.6L engine delivering up to 117 horsepower, paired with a six-speed transmission. The power output is superior compared to other models with the same displacement, making it perfectly suitable for family use. Additionally, the powertrain technology of this car is relatively mature.

14

0

Share

Which is more durable, 95 or 92 gasoline?

95 gasoline is not necessarily more durable than 92. A higher octane rating does not directly indicate better fuel quality, as the octane rating is not directly related to fuel quality. Below is relevant information about 98 and 95 gasoline: Both 92 and 95 gasoline share the same base oil, with their main difference lying in the ratio of n-heptane to isooctane. The higher the fuel octane rating, the slower the combustion rate, resulting in lower combustion knock, and requiring the engine to have a higher compression ratio. Higher-octane fuels burn more slowly, requiring the ignition timing to be advanced. The opposite is also true. In addition to checking the suitable gasoline octane rating in the car's manual, you can also find it on the fuel tank cap, which will also indicate the recommended octane. Generally, the required gasoline octane can also be determined based on the engine's compression ratio. Cars with a compression ratio between 8.6-9.9 should use 92 gasoline, while those with a compression ratio between 10.0-11.5 should use 95 gasoline. If the compression ratio is even higher, 98 gasoline is recommended. However, with the use of new technologies, the octane rating cannot be determined solely based on the compression ratio. Engines with high compression ratios can also be tuned to use lower-octane gasoline because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92 gasoline contains 92% isooctane and 8% n-heptane, while 95 gasoline contains 95% isooctane and 5% n-heptane. Occasionally using the wrong gasoline octane rating only requires switching back to the correct one after use. However, long-term use of the wrong octane rating can have the following effects: Using a higher octane rating than recommended in a vehicle designed for lower octane will not cause damage, but the increased octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. Using a lower octane rating than recommended in a vehicle designed for higher octane can cause engine knock. Because the octane number is too low, the fuel's ignition point decreases, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires during the compression stroke, resistance is created during the upward stroke. This resistance makes the engine run very unstably. If the knock is imperceptible, it only increases noise without significant engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.

20

2

Share

Does the Haval F7x have a four-wheel drive model?

The difference between BYD Tang DMI and Tang DM?

Why is the fuel consumption of Beijing Hyundai Elantra Lingdong increasing?

Are the Three Major Components of Dongfeng Fengshen Yixuan Domestic?

Does the Nissan Qashqai have a rear anti-collision steel beam?

What is the fuel consumption of the 11th generation Citroen C-Quatre?

Which is more durable, 95 or 92 gasoline?

What are the common problems with the Peugeot 4AT transmission?

Will points be deducted for touching the left dashed line after parallel parking?

What is Tayron-X in Volkswagen's lineup?

How long is the warranty for Jetta VS5?