Does the Geely Emgrand GS have a break-in period?

What to Do When the Battery of a Keyless Start Car Key Dies?

The solutions for a keyless start car key with a dead battery are: 1. Insert the smart key into the center console; 2. Insert the key blade inside the remote key into the keyhole; 3. Place the remote key against the start button or other sensing area; 4. Simply replace the battery. Keyless start is part of a smart car, a button device that simplifies the starting process and can also turn off the engine. The functions of keyless start include: 1. Multiple start modes; 2. Convenience and speed; 3. Stable and reliable performance; 4. Smart sensing entry; 5. Free switching between dual modes of the smart key; 6. Smart card backup key; 7. Intelligent silent car wash mode.

16

3

Share

Where is the transmission oil filler port located on the Mistra?

The transmission oil filler port on the Mistra is located at the upper left corner of the engine. The transmission is a mechanism used to alter the speed and torque from the engine, capable of fixed or stepped changes to the transmission ratio between the output and input shafts. The Mistra is a 4-door, 5-seater sedan launched by Beijing Hyundai. Taking the 2021 Mistra Flagship Edition as an example, its body dimensions are: length 4780 mm, width 1815 mm, height 1460 mm, with a wheelbase of 2770 mm and a fuel tank capacity of 52 liters. The 2021 Mistra Flagship Edition is equipped with a 1.5T inline 4-cylinder turbocharged engine, delivering a maximum power of 125 kW at 5500 rpm and a maximum torque of 253 Nm between 1500 to 4000 rpm.

20

1

Share

What Causes Insufficient Power When Going Uphill?

There are several reasons why a car may experience insufficient power when going uphill: 1. Fuel system issues: The fuel system is a common source of problems in vehicles. Insufficient fuel entering the combustion chamber could be caused by clogged fuel injectors, fuel line leaks, reduced fuel pump performance, or a blocked fuel filter. 2. Poor fuel quality: If using substandard gasoline with excessive impurities, these contaminants can clog small passages or filtration components in the fuel system (such as the fuel pump screen, fuel filter, or fuel injectors) during engine operation, leading to poor fuel delivery and reduced engine performance. 3. Carbon buildup: Excessive carbon deposits in the throttle body or intake manifold can restrict airflow, preventing complete combustion of gasoline and resulting in power loss, along with increased fuel consumption. Clogged fuel injectors may cause poor fuel atomization or complete failure to inject, leading to cylinder misfire and reduced engine output. 4. Faulty ignition coil: A damaged ignition coil may prevent a cylinder from firing properly, causing power loss due to cylinder misfire and accompanied by engine vibration. 5. Fuel pump failure: A malfunctioning fuel pump may not deliver sufficient fuel, ultimately causing inadequate fuel injection and reduced engine power output, resulting in overall vehicle power deficiency.

13

5

Share

How to Determine if the Volkswagen EA888 PCV Valve is Good or Bad?

Methods to determine if the Volkswagen EA888 PCV valve is good or bad include: 1. Check if there is blue smoke coming from the exhaust pipe; 2. Open the oil filler cap and see if there is severe suction. The PCV valve is installed between the compressor outlet and the condenser inlet, and its function is to improve the heat transfer effect in the condenser and evaporator through separation. Volkswagen is a brand under the German Wolfsburg Automobile Manufacturing Company, and its models include: Magotan, Lavida, Phaeton, Sagitar, Bora, etc. Taking the Magotan 2020 280 Comfort model as an example, its body dimensions are: length 4865 mm, width 1832 mm, height 1471 mm, wheelbase 2871 mm, fuel tank capacity 66 liters, and curb weight 1445 kg.

12

1

Share

What do the gear positions M+ and M- mean?

M stands for Manual, indicating the manual shifting mode. Generally, the + and - signs on an M-gear transmission mean shifting gears by pushing the gear lever forward or backward or using the steering wheel paddles. The following are the technical requirements for shifting gears: 1. Timely: Master the appropriate shifting timing, meaning you should not upshift too early or downshift too late. 2. Correct: The coordination between the clutch pedal, accelerator pedal, and gear lever should be accurate and harmonious, with precise positioning. 3. Smooth: After shifting into a new gear, release the clutch pedal promptly and smoothly. 4. Swift: The action should be quick to minimize shifting time, reduce kinetic energy loss, and lower fuel consumption.

6

5

Share

How to set the seat memory on the Lynk & Co 01?

To set the seat memory on the Lynk & Co 01, adjust the seat and rearview mirror to your preferred position and press the memory button M. There are two types of seats: 1. Leather seats: Easy to clean. Compared to fabric-covered seats, dust only settles on the surface of leather seats and does not penetrate deep into the seat. Therefore, a simple wipe with a cloth is sufficient for cleaning. For fabric seats, seat covers may need to be purchased, as stains can penetrate into the seat if not cleaned promptly. 2. Leather: The surface is smooth and soft to the touch, with almost invisible pores. The material is sturdy yet highly flexible, making the seats aesthetically pleasing. This is the most common material used for car leather seats.

19

2

Share

Does the Geely Emgrand GS have a break-in period?

What to Do When the Battery of a Keyless Start Car Key Dies?

Where is the transmission oil filler port located on the Mistra?

What Causes Insufficient Power When Going Uphill?

How to Determine if the Volkswagen EA888 PCV Valve is Good or Bad?

What do the gear positions M+ and M- mean?

How to set the seat memory on the Lynk & Co 01?

What is the issue with squeaking noise during semi-engaged clutch start in first gear?

What Are the Causes of Piston Scuffing?

What are the dimensions of the Range Rover Velar?

What are the drawbacks of changing from 18-inch to 19-inch wheels?