Does the GAC Trumpchi GS3 come with a sunroof?

2 Answers
CadenLynn
07/29/25 2:17am
GAC Trumpchi GS3 is equipped with a sunroof across all its models. The sunroof changes the traditional ventilation method, as the incoming wind creates an airflow that draws out the stale air inside the cabin. When the car is driving at high speed, air flows rapidly around the vehicle. When the sunroof is opened, a low-pressure area forms outside the car. Due to the difference in air pressure inside and outside the car, the stale air inside is drawn out, achieving the purpose of ventilation. The Trumpchi GS3 is a compact SUV under the GAC Trumpchi brand, with body dimensions of 4350mm in length, 1825mm in width, and 1655mm in height, and a wheelbase of 2560mm.
Was this review help?
18
0
Share
DiAniyah
08/12/25 6:16am
When it comes to the sunroof configuration of the GAC Trumpchi GS3, this compact SUV does vary depending on the version. For example, higher-end models or certain model years often come equipped with a panoramic sunroof, offering an amazing view! I've driven a friend's top-trim GS3, and with the sunroof open, the whole cabin feels brighter—especially on long trips, it's great for ventilation and adds a romantic touch, allowing you to gaze directly at the stars. But don't expect every model to have one—base versions might not include it, so be sure to check the specs or ask the dealer before buying. Sunroof maintenance shouldn't be overlooked either; regularly clean the tracks and prevent rainwater from seeping in to avoid leaks. Overall, the GS3 models with a sunroof are a joy to drive, and if your budget allows, it's definitely a great choice.
Was this review help?
6
1
Share
Expand All
More Forum Discussions

What does the exhaust pipe resonance of the 5008 mean?

The exhaust pipe resonance of the 5008 refers to the vibration of the car's floor, accompanied by a humming sound, which can significantly affect the vehicle's comfort. The vibration of the exhaust pipe is a form of resonance caused by the engine's operation. Typically, a corrugated pipe is installed after the catalytic converter and before the middle section of the exhaust to reduce vibrations transmitted to the middle and rear sections. This corrugated pipe functions like a spring damping system. A well-designed corrugated pipe can attenuate most of the vibrations propagating along the exhaust pipe, but some residual vibrations may still continue. Methods to resolve the exhaust pipe resonance in the 5008: Add clamps: Clamps are quite effective, but the resonance may still occur as the vehicle's condition changes. Replace the exhaust pipe hanger rubber: It is recommended to use high-strength exhaust pipe hanger rubber. Install a flexible mesh/soft connection: Adding a flexible mesh or soft connection can also help reduce exhaust resonance.
17
5
Share

What are the causes of electronic power steering failure in the 2013 Cruze?

Cruze steering wheel electronic power steering failure reasons are as follows: Air in the system: The power steering system contains a large amount of air, leading to abnormal car steering. Electrical failure: Poor contact inside the electronic power steering's connectors or motor. Control valve failure: Foreign objects in the steering hydraulic lines cause the steering pump's flow control valve to stick, or excessive wear of the steering gear piston cylinder and poor oil seal sealing, leading to control valve adhesion or damage. Hydraulic system failure: Loose connections in the power steering system cause steering fluid leakage, overloading the steering system, resulting in excessive wear of the stator and rotor inside the steering pump, thus causing irregular oil movement and abnormal noise.
5
5
Share

What is the reason why the Audi A6 retractable screen does not automatically rise?

It may be a malfunction caused by a broken wiring harness. Appearance: The design features a different front grille and fog light assembly compared to the gasoline version. The LED daytime running lights have also been slightly adjusted to appear more technologically advanced, and it uses the densely-spoked wheels commonly found on new energy vehicles. Performance: It comes with one displacement option of 2.0T and one transmission choice of automatic manual. The engine has a maximum power of 155kW, a maximum horsepower of 211PS, and a maximum torque of 350Nm. The new car achieves a maximum pure electric range of 50km, a top speed of 135km/h, and a comprehensive range of up to 880km.
18
2
Share

What is the normal range for the timing chain tolerance of the Magotan?

The normal tolerance range for the Magotan timing chain is +3 to -3 degrees. With the continuous advancement of automobile manufacturing technology and industrial development, timing belts in some engines have been replaced by timing chains. Compared to traditional belt-driven systems, chain-driven systems offer more reliable transmission, better durability, and space-saving benefits. The entire system consists of components such as gears, chains, and tensioners. Precursors to timing chain failure in the Magotan include abnormal engine noises, weak startup, increased fuel consumption, increased oil consumption, severe exhaust emissions, sluggish acceleration response, the illumination of the yellow engine warning light, and insufficient power, among other issues. Timing chain inspection methods: Check the timing chain for elongation, wear, or breakage. If there is minor damage, it should be replaced immediately. Use a spring scale to measure the elongation at three or more points along the chain. If the elongation exceeds the permissible limit, the chain should be replaced promptly. The service life of a timing chain is approximately 160,000 kilometers. During this period, drivers should have the chain inspected at a professional repair shop. If the timing chain is severely worn or if there are other engine issues, timely repair or replacement is necessary.
5
5
Share

What are the main buttons of the Great Wall Fengjun 5?

Fengjun 5 button functions are as follows: Air conditioning off button (OFF): Press this button to turn off the air conditioning system, and the air conditioning settings interface will exit after a few seconds. Auto mode button (AUTO): Press this button, and the indicator light will turn on. Set the temperature to the desired level, and the air conditioning system will automatically adjust the airflow mode and volume to reach the set temperature. A/C button: Press this button, and the indicator light will turn on. After the compressor is activated, it can lower the temperature and humidity inside the car. Pressing this button when the air conditioning is off can turn on the air conditioning. Fengjun 5 model features: The interior color scheme has changed from gray to a black-gray dual-tone combination, with the center console panel and air vent trim painted silver. Additionally, the seats have undergone process improvements, and new seat fabrics have been selected to enhance comfort. In terms of power, it still comes equipped with a 2.0T diesel engine, 2.5T diesel engine, 2.8T diesel engine, and 2.2L and 2.4L gasoline engines, paired with a 5-speed manual transmission.
10
3
Share

Are Ford 6AT and GM 6AT the Same?

Ford 6AT and GM 6AT are the same because both are co-developed transmissions with identical product technologies. A transmission is a device that changes speed ratios and the direction of motion. It is used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and multiple gear pairs. Transmission maintenance methods: Timely inspection of the transmission: Regularly check the fluid level in the transmission to ensure it remains within the specified range. Refill as needed based on actual working conditions, ensuring the new fluid is of the same type. When replacing the fluid, do so while the transmission is operating to promptly drain the old fluid and clean the system. Periodically inspect the working condition of the transmission gears to ensure optimal meshing between gears, and clean them regularly to maintain proper gear and shaft alignment. Timely inspection of different connection points in the transmission: During routine maintenance, inspect the condition of all connection points in the transmission to promptly identify issues such as looseness, wear, or damage. Tighten any loose connections immediately and repair or replace damaged parts as needed. Regularly check for oil leaks or seepage at the shaft-end oil seals and external joints, and replace failed seals or gaskets promptly.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.