Does the front fog light turn on when the rear fog light is activated?

2 Answers
Hernandez
09/07/25 3:08am
The front fog light turns on when the rear fog light is activated. Method to activate the rear fog light: The rear fog light can only be turned on simultaneously with the front fog light and cannot be activated separately. There are mainly two types of fog light switches: button-style and knob-style. Different car manufacturers have their preferred methods for activating fog lights. Precautions for rear fog light usage: Even in light fog areas, it is advisable to reduce driving speed appropriately and increase the distance between vehicles. When visibility is between 500-200 meters, it is mandatory to turn on the anti-glare dipped headlights and tail lights, with the speed not exceeding 80 km/h, and maintaining a distance of more than 150 meters between vehicles to ensure driving safety.
Was this review help?
13
3
Share
Verona
09/19/25 2:37am
To be honest, after driving for so many years, I often use the rear fog lights in foggy conditions, but the front fog lights don't automatically turn on when the rear ones are activated. They're usually independent systems. In my car, the control switches are located next to the steering wheel, with a dedicated rear fog light button and a separate front fog light button. Every time I turn on the rear fog lights, I have to manually press the front light button to activate the front fog lights. This surprised me at first, but I've gotten used to it and find it quite convenient. Some people might assume that the front lights come on automatically with the rear lights, but that's really not the case. I recommend turning on both front and rear fog lights in foggy weather. The rear fog lights are red, making your vehicle more visible to drivers behind you, while the front fog lights are yellow, illuminating low-lying fog ahead to improve driving safety. If you're unsure, check your vehicle's manual as designs vary between models. Also, remember to check your fog lights during regular maintenance to prevent malfunctions when you need them most.
Was this review help?
13
1
Share
Expand All
More Forum Discussions

What to Do When the Rearview Mirror of a Corolla Becomes Blurry After Rain?

Electrically heated rearview mirrors work by heating the wires embedded behind the mirror, gradually raising the mirror surface temperature to over 40°C to accelerate the evaporation of moisture on the mirror. Rain deflectors are suitable for use when the rain is not too heavy, but their effectiveness significantly diminishes during heavy rain, ensuring only about one-third of the rearview mirror remains clear. When a glass treated with a water repellent gets wet, small water droplets form into round beads that can easily roll off the rearview mirror with a slight shake or breeze.
12
5
Share

What brand is Boto tires?

Boto is a brand under Wan Da Bao Tong Tires. It is one of the first Chinese enterprises to pass third-party certification. Its products have obtained certifications such as 3C compulsory certification, ISO9001, and DOT. Boto tires are not only sold domestically but also exported to 130 countries and regions including the United States, Europe, and Asia. When using Boto tires daily, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread wears flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may degrade rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not use water to cool overheated tires. In hot weather or during high-speed driving, tires tend to overheat, and the pressure increases. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent and hard braking to prevent accelerated tread wear caused by dragging between the tires and the road surface.
4
5
Share

Should You Engage the Handbrake or Shift to Neutral First When Waiting at a Red Light?

When waiting at a red light, you should engage the handbrake first. Below is a detailed introduction about car braking: 1. Braking: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery. The braking device is a mechanical deceleration device that slows down the vehicle, also known as a decelerator. 2. Braking System: The braking system consists of the control system, hydraulic system, and power assist system. The control system includes the pedal, handbrake, etc. The hydraulic system is composed of hydraulic oil, brake pump, and hydraulic oil pipes. The power assist system is the vacuum booster pump. The electronic control system consists of the ABS pump, ABS sensors, and ABS computer. The execution system includes the brake caliper, brake pads, and brake disc.
1
4
Share

How to determine if the car body is straight in Subject 2?

If your line of sight is parallel to the lane edge line, the car body is straight. If your line of sight intersects with the lane edge line, adjust the car body in the opposite direction. If you feel you are in the center of the road, the car is also in the center of the road, and at this time, the car is definitely straight. When driving, you should not only look ahead but also check the side mirrors. On roads with markings, you can observe whether the vehicle is driving in the middle through the side mirrors. You can check if the windshield washer nozzles at the front of the car are aligned with your line of sight or choose a reference object to compare with the car body to see if the car is straight.
10
0
Share

What to Do If the Car Frequently Stalls During the Hill Start in Subject 2?

At the moment of stopping at the designated point, press both the clutch and brake simultaneously. Immediately pull up the handbrake and hold it for more than 4 seconds to ensure the car stops stably and effectively prevent stalling. The more proficient you become, the easier it is to lift the clutch too quickly. If the car didn't stall before but suddenly starts stalling later, it might be because the clutch is being released too quickly. Lift it slowly and hold it steady after reaching the semi-engaged state. When the car reaches the semi-engaged state by releasing the clutch, be sure to release the brake promptly. Delaying too long may cause the car to stall. After feeling the car shake, gently release the brake.
8
1
Share

How to Check the Production Year of Tires?

Observe the DOT marking. Here are the specific details: Observe the DOT marking: The last four digits of the marking indicate the production date, consisting of four digits AABB. The first two digits AA represent the week of the year, and the last two digits BB represent the year. Introduction to bias-ply tires: From a design perspective, bias-ply tires have many limitations, such as accelerated tread wear due to friction between the cross plies, and the ply arrangement does not provide good control. Introduction to radial tires: Radial tires have steel belts with better flexibility, adapting to irregular road impacts and offering long-lasting durability. Their fabric structure results in a longer tire lifespan.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.