Does the front and rear position of the seat affect the driving experience?

2 Answers
VonMaverick
08/26/25 4:32am
Yes. Here is the relevant introduction about seat position: 1. Correct seat position: The correct seat height should be adjusted so that the driver's view is not blocked by the steering wheel, and all important instruments and street signs can be clearly seen. After adjusting the seat height, the front and rear position of the seat should also be adjusted. 2. Only by properly adjusting the seat can you clearly see the road conditions ahead: After adjusting the front and rear distance, adjust the seat height so that you can see the horizontal midline position of the front windshield. If the position is too high, when encountering sudden braking or uneven road surfaces causing the car to jolt, the driver's head can easily collide with the roof.
Was this review help?
17
0
Share
LeGrant
09/08/25 6:01am
As an ordinary person who values car safety, I believe the front and rear position of the seat indeed has a significant impact on that safety point. If the seat is adjusted too far forward, the seat belt point becomes overly tight, not only causing discomfort but also increasing risks in emergencies. If it's too far back, the safety point becomes loose and fails to provide protection, and the airbag deployment point responds poorly. The correct position should be sitting upright with your back against the seat, knees slightly bent to easily reach the pedals, and the shoulder belt lying flat and comfortably without wrinkles. During daily driving, I always take time to ensure this point is safe and reliable to avoid regrets in case of an accident. After developing this habit, my sense of security has greatly increased, and I experience less fatigue on long trips. Remember to refer to the manual's recommended points when setting up a new car—don’t underestimate this detail, safety comes first.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

How to Clear the Vehicle Condition Check Code on Golf 7?

Use a computer to access the dashboard system, select the matching function, and set all the maintenance cycle data in the matching to zero. Below is some relevant information about the Golf 7: 1. The Golf 7 refers to the seventh-generation product of the Golf. On December 10, 2013, FAW-Volkswagen officially launched the new Golf 7 in Guangzhou. Volkswagen Germany introduced the first-generation Golf in 1974, and it has undergone seven generations of updates since then. 2. The Golf 7 is equipped with the EA211 series 1.6L and 1.4T engines, maintaining the same displacement as the Golf 6, but with changes in the power parameters of both engines. The 1.6L engine has a maximum power of 81 kW and a maximum torque of 155 Nm, paired with a 5-speed manual and 6-speed automatic transmission. The 1.4TSI engine comes in two different tuning versions: the low-power version has a maximum power of 96 kW and a peak torque of 225 Nm, while the top-end 1.4TSI flagship model is equipped with the high-power version, delivering a maximum power of 110 kW and a maximum torque of 250 Nm, approaching the power level of the EA888 series 1.8TSI engine. 3. The transmission system is paired with a 5-speed manual and 7-speed dual-clutch transmission.
14
1
Share

What is the ground clearance of the 10th-generation Accord?

" The ground clearance of the 10th-generation Accord is 100 millimeters. The ground clearance of the 10th-generation Accord refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the 10th-generation Accord, the better its off-road capability. However, if the ground clearance is too high, the stability during high-speed driving may decrease. The design of the 10th-generation Accord began in 2000, with dimensions of 4906 mm in length, 1862 mm in width, and 1449 mm in height, and a wheelbase of 2830 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the 10th-generation Accord is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the load variations of the 10th-generation Accord. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or regions with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage, considering its off-road performance. "
17
0
Share

What is the fuel tank capacity of the Fengjun 5 in liters?

The fuel tank capacity is approximately 70 liters. Generally, small cars have fuel tank capacities ranging from 35 to 45 liters, while medium-sized cars have capacities around 55 to 75 liters. A full tank typically allows for a driving range of about 500 kilometers. The size of the fuel tank correlates with the vehicle's fuel consumption—larger tanks for higher fuel consumption and smaller tanks for lower consumption. Additional relevant information is as follows: 1. Unit of Measurement: Internationally, the standard unit for measuring fuel tank capacity is liters (L). Different countries have their own standards for fuel tank capacity. In China, the fuel tank capacity is regulated to be at least 95% of the nominal value, but in practice, the actual capacity is often greater than the nominal capacity, so there's no need to worry about the fuel tank being smaller than expected. Nowadays, many car manufacturers design fuel tank capacities based on their brand and model specifications, so some countries do not have specific regulations regarding fuel tank capacity. Vehicles with higher fuel consumption tend to have larger fuel tanks, while those with lower consumption have smaller ones. 2. How to Check Fuel Tank Capacity: The fuel level is usually monitored through the fuel gauge inside the vehicle. If there are no issues, the gauge will accurately reflect the remaining fuel. The fuel gauge typically has 5-6 segments, with each segment representing a portion of the remaining fuel. It is advisable to refuel when the gauge shows only two segments remaining to avoid running out of fuel while driving.
15
5
Share

Does the BMW M2C come with a manual transmission model?

The BMW M2C does have a manual transmission model, but manual transmission models are particularly rare in the domestic market. Here is the relevant information: 1. The BMW M2C is actually the BMW M2 Competition Edition. The BMW M2C has a wheelbase of 2693 mm, with length, width, and height measuring 4476 mm, 1854 mm, and 1423 mm respectively. The BMW M2C is a two-door, four-seater sports car. 2. The BMW M2C is equipped with a 3.0-liter twin-turbocharged inline six-cylinder engine across all models, with the engine code being S55B30. This engine delivers 410 horsepower and a maximum torque of 550 Nm, with the maximum power output achieved at 5230 to 7000 rpm and the maximum torque available from 2350 to 5230 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The BMW M2C uses a double-joint independent suspension at the front and a multi-link independent suspension at the rear. Many of BMW's sports cars use the double-joint suspension, which is essentially an improved version of the MacPherson strut. The double-joint suspension replaces the L-shaped control arm of the MacPherson strut with two separate links, resulting in two connection points between the suspension and the steering knuckle.
3
1
Share

What Does the Triangle with Exclamation Mark Symbol Mean?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's regular performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, exterior light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow parenthesis with a horizontal line and an exclamation mark in the middle, and a yellow light bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission issue or low transmission fluid. Transmission fluid should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Abnormal: A parenthesis with a horizontal line and an exclamation mark in the middle indicates a tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow light bulb with an exclamation mark is a lighting fault indicator, signaling a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.
6
4
Share

What is the ground clearance of a sports car?

The ground clearance of supercars is never less than 7cm. The LP640 has a minimum ground clearance of 14cm, which reduces to around 10cm when fully loaded. The standard ground clearance for an F1 car is 8cm, and when fully loaded (full fuel + driver), it can be as low as 5-7cm, depending on the specific model and suspension stiffness. Vehicles driven on public roads cannot go below these standards. The chassis serves to support and mount the car's engine and its various components and assemblies, forming the overall shape of the vehicle. It also receives power from the engine to enable motion and ensure normal operation. Additionally, a well-designed chassis can safeguard the driver's life.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.