Does the Fista have a China VI model?

How to Determine if a Tire Pressure Warning is a False Alarm?

Check the tire pressure data for each wheel, carefully identifying any leaks or problematic tires (slow leaks from small nails puncturing the tire are common). Repair or replace the problematic tire (if a single wheel patch exceeds 5 grams, a dynamic balance is required). Reinflate all four tires to 2.5Bar, then recalibrate via the central control screen. The New 8 series (both old and new models) comes standard with indirect tire pressure monitoring.

3

Share

How to Determine if the Tie Rod is Damaged?

Most vehicle steering wheels have the function of automatically returning to center. Cars equipped with hydraulic power steering systems experience this due to the damping effect of the hydraulic system. When driving on a crowned road surface, the vehicle naturally tends to drift to one side. If the crown is significant, the drift becomes more noticeable and can be influenced by external factors. If you notice that steering feels lighter in one direction and heavier in the other, you should immediately take the vehicle to a 4S shop for inspection and repair.

8

1

Share

Where is the high-pressure air conditioning connector located on the Mercedes-Benz R350?

The high-pressure air conditioning connector of the Mercedes-Benz R350 is located under the hood, on the left side of the engine. The Mercedes-Benz R350 is a station wagon introduced by Mercedes-Benz with a top speed of 230 km/h. It is equipped with an M272 KE35 engine, delivering a maximum power of 200 kW and a maximum torque of 350 Nm. It is available in three colors: champagne gold, silver gray, and black. The Mercedes-Benz R350 is a classic business vehicle, with body dimensions of 5157 mm in length, 1922 mm in width, and 1661 mm in height, and a wheelbase of 3215 mm.

2

0

Share

How to Deal with Speeding Over 50% on Regular Roads?

Whether on highways or urban expressways, speeding over 50% will result in corresponding fines, 12 demerit points, and possible revocation of the motor vehicle driver's license. Article 99 of the Road Traffic Safety Law states that if a motor vehicle exceeds the prescribed speed limit by 50%, the traffic management department of the public security organ shall impose corresponding fines. According to the regulations on demerit points for road traffic safety violations, driving a motor vehicle at a speed exceeding the prescribed limit by 50% or more will result in 12 demerit points in a single instance.

6

2

Share

Is There a Concept of Wrong-Way Walking for Pedestrians?

The Road Traffic Safety Law, Article 61, stipulates that "pedestrians should walk on sidewalks, and where there are no sidewalks, they should walk on the side of the road." Walking on the side of the road means that the width of the pedestrian passage generally should not exceed 1 meter from the edge of the road. There is no distinction between walking with or against the flow of traffic for pedestrians, so walking against the flow is not illegal. Precautions for walking are as follows: 1. Note 1: Walk on sidewalks and keep to the right. 2. Note 2: When crossing the road, use pedestrian crossings, looking first to the left and then to the right for vehicles. 3. Note 3: At pedestrian crossings with traffic signals, proceed when the light is green and stop when it is red. 4. Note 4: At pedestrian crossings with self-service traffic signals, press the crossing button and wait for the green light and for vehicles to stop before crossing; do not proceed when the light is red or displays a "wait" signal. 5. Note 5: In areas with overpasses or underpasses, do not cross the road directly. 6. Note 6: In areas without pedestrian crossings or crossing facilities, cross the road only after confirming it is safe. 7. Note 7: Do not play or run on vehicle lanes or bicycle lanes. 8. Note 8: Do not climb over traffic barriers, nets, or dividers. 9. Note 9: Be cautious of slipping and falling on snowy or icy roads. 10. Note 10: Wearing powerisers or wheelies is prohibited on the way to school and within school premises.

10

2

Share

How to Install a Car Belt?

Turn off the engine and let it cool down, then open the engine hood to locate the generator belt at the front of the engine. Press the belt to check its tension. Loosen the adjustment bolt of the generator and adjust the pivot bolt. Move the generator inward to loosen the belt. Remove the generator belt from the pulley. Compare the removed old belt with the new one, and after confirmation, install the new belt. Pull the generator outward until the belt is tight. Adjust the pivot bolt strictly according to the manufacturer's instructions. Start the engine to verify the repair results, then turn off the engine and recheck the belt's tightness.

14

2

Share

Does the Fista have a China VI model?

How to Determine if a Tire Pressure Warning is a False Alarm?

How to Determine if the Tie Rod is Damaged?

Where is the high-pressure air conditioning connector located on the Mercedes-Benz R350?

How to Deal with Speeding Over 50% on Regular Roads?

Is There a Concept of Wrong-Way Walking for Pedestrians?

How to Install a Car Belt?

How to turn off the WM Motor vehicle?

What to Do If Rust Remover Is Sprayed on Brake Pads?

What is Tire Pressure?

How to Determine the Repair Plan for an Accident Vehicle?