···
Log in / Register

Does the Excelle have an engine guard?

6Answers
LeJayla
07/29/2025, 05:00:51 PM

Excelle does not come with an engine guard. Owners can decide whether to install an engine guard based on their specific driving conditions. The following are the advantages and disadvantages of installing an engine guard: I. Advantages: 1. When driving on muddy roads, gravel roads, or in mountainous areas, the engine guard can effectively protect the engine, preventing sand, stones, and other hard objects kicked up by the tires from hitting the engine, thereby avoiding dents and scratches. 2. It helps keep the engine compartment clean, preventing road water and dust from entering. II. Disadvantages: 1. It may affect noise insulation. 2. It may impact heat dissipation. 3. It could lead to increased fuel consumption.

Was this review help?
109
Share
StSara
08/15/2025, 02:56:59 PM

I've been driving my Excelle for almost two years now. When I first bought the car, I noticed that the factory standard configuration didn't include an engine guard plate, which is quite common among many base model sedans. But I think it's quite necessary to install one, as I often encounter potholes or small stones on suburban roads. If the chassis hits something hard, it can protect the engine oil pan from being scraped. I spent less than 600 yuan to install a metal one myself, and I feel much more at ease, plus the driving noise has reduced slightly. While saving money by not installing a guard plate might seem economical, the risk is higher on rough roads. If the engine gets damaged, repairs could cost thousands. Overall, many Excelle owners in the community recommend installing one afterward—it's not expensive and saves a lot of hassle.

Was this review help?
12
Share
Expand All
DelGarrett
10/16/2025, 03:56:14 AM

As a car enthusiast, I've studied the design configurations of the Excelle. It generally doesn't come with an engine guard plate from the factory unless it's a high-end version or a customized option. The guard plate can protect against mud, water, and stone impacts on the engine's bottom components, enhancing driving safety. However, from a technical perspective, installation requires consideration of heat dissipation effects: metal guard plates may affect air intake, while plastic ones are lightweight but slightly less durable. I've helped a friend install one at a modification shop, and choosing the right material is crucial—for example, plastic for city driving and aluminum for suburban use. After installation, it's essential to check if it affects other components and ensure the original vehicle warranty remains valid. While skipping the guard plate may save money initially, long-term use on poor road conditions could increase maintenance costs—this trade-off needs careful consideration.

Was this review help?
10
Share
Expand All
DiAlexa
11/29/2025, 03:42:06 AM

The original model of the Excelle doesn't come with an engine guard, which I've seen many owners complain about in forums. However, installing one is simple: plastic ones cost around 300 yuan, while metal ones are about 800, and it takes just half an hour at an auto parts store. The key purpose of the guard is to protect the engine from impacts, such as road debris or water splashes. Without it, mud can accumulate under the chassis, shortening the engine's lifespan. Personally, I think safety-conscious drivers should consider adding one, especially if they frequently drive on rough roads. It's not a must, but it can prevent major repair troubles.

Was this review help?
1
Share
Expand All
HopeFitz
01/19/2026, 10:17:37 PM

From an economic perspective, the Buick Excelle not being equipped with an original engine guard saves some production costs, but retrofitting one isn't expensive either. Working at a repair shop, I've seen customers get it done for under 500 yuan, with used options being even cheaper. The guard's function is obvious: it prevents damage and reduces repair risks—without it, a minor collision could cost thousands to fix the oil pan. However, for those who only drive in cities, a guard isn't essential; skipping it reduces weight and saves fuel. It's advisable to assess local road conditions: install one if roads are poor, otherwise, skip the expense. In short, a reasonable investment can extend your car's lifespan.

Was this review help?
1
Share
Expand All
HarperLynn
04/15/2026, 11:12:50 PM

When I drove my Excelle without an engine guard plate installed, I once hit a pothole during an outing, causing the chassis to scrape against a rock and resulting in an oil pan leak. The repair cost over 1000 RMB. I regretted not installing it earlier—the guard plate only costs around 400-700 RMB and could have prevented such an accident. The Excelle doesn’t come with one from the factory, but owners can add it later: plastic ones are lightweight, while metal ones are sturdy, and installation doesn’t affect the warranty. From experience, a guard plate is like insurance—invisible most of the time but crucial in emergencies. Now I always recommend friends to install one, especially families who frequently take long trips. It brings peace of mind even on rough roads and is worth the money.

Was this review help?
16
Share
Expand All
More Q&A

What is the difference between two-wheel drive and four-wheel drive for sedans?

The differences between two-wheel drive and four-wheel drive in vehicles can be summarized in three aspects: 1. Driving method: 1. Two-wheel drive: Two-wheel drive means only two wheels are the driving wheels, connected to the vehicle's power system. 2. Four-wheel drive: Four-wheel drive refers to the vehicle maintaining a four-wheel drive form throughout the entire driving process. 2. Fuel consumption: The four-wheel drive mode can provide better off-road and handling performance at any time, but it cannot adjust torque distribution according to road conditions, and it has higher fuel consumption. 3. Number of differentials: 1. Two-wheel drive: The vehicle differential allows the left and right (or front and rear) driving wheels to rotate at different speeds. 2. Four-wheel drive: In four-wheel drive, to drive all four wheels, all wheels must be connected. If the four wheels are mechanically connected together, a central differential is needed to adjust the speed difference between the front and rear wheels.
112
Share

How to Deal with Car Battery Leakage?

First, conduct a visual inspection to identify the leakage location. If you find cracks in the casing or tiny fissures where the liquid is seeping out, you can use plastic welding to patch it up. Here are the steps to handle battery leakage: 1. If there are no signs of cracking or aging, remove the panel and check the safety valve for any signs of leakage. If there is an issue, the safety valve will need to be repaired or replaced. 2. Remove the cover and check around the cap valve for any traces of leakage, then open the cap valve to observe if there is any flowing electrolyte inside the battery. 3. If no abnormalities are found after the above steps, perform an airtightness test (place the battery in water, inflate and pressurize it, and observe if any bubbles emerge—bubbles indicate leakage). 4. Finally, during the charging process, observe if any flowing electrolyte is produced. If so, it indicates a manufacturing defect. If flowing electrolyte is present during charging, it should be completely drained.
116
Share

What is the Function of a Universal Joint Drive?

Universal joint drive serves to connect the transmission output shaft and the final drive input shaft that are not aligned in a straight line, ensuring reliable power transmission even when the angle and distance between the two shafts frequently change. More details about universal joint drives are as follows: 1. Universal joint drives can be divided into enclosed and open types. Enclosed universal joint drive: Uses a single universal joint with the drive shaft enclosed in a sleeve; the sleeve is connected to the frame via a ball joint and fixed to the drive axle. Its most notable feature is that the drive housing acts as a thrust tube to transmit the vehicle's longitudinal force, allowing the drive shaft housing to function as a longitudinal swing arm in the suspension system and guiding mechanism. This is particularly necessary when the rear suspension uses coil springs as elastic elements. 2. Open universal joint drives have a simple structure and are lightweight, making them widely used in modern vehicles. Applications of universal joint drives.
118
Share

How to Change Engine Oil at Home?

Dispose of the used engine oil according to local regulations. Below are the steps for changing engine oil: 1. First, start the car engine and turn it off once the water temperature reaches the normal operating range. This allows the oil to circulate fully within the engine, carrying away impurities. Then, lift the vehicle using a car lift. If a lift is not available, a jack can be used as an alternative, though it may be less convenient. 2. Next, use the vehicle's tools to loosen the oil pan bolt and remove the oil filter with a specialized wrench. After all the oil has drained completely, install the new oil filter using the wrench and pour the appropriate amount of oil (within specifications) into the oil pan. 3. Ensure the oil level does not exceed the maximum mark. Exceeding this level can increase internal engine power loss, lead to carbon buildup over time, and in severe cases, may cause oil burning issues.
117
Share

What does 'track' mean in a car in Chinese?

track refers to switching radio channels, commonly used in audio systems. Below is an introduction to equipment related to track: 1. Signal source equipment: Signal source equipment includes FM radio devices and playback devices (such as cassette tapes or CDs). 2. Radio: A radio is a device specifically designed to receive broadcast programs. 3. Speaker system: Speakers are crucial components that determine the audio performance inside the car, serving as the terminal of the car audio system. To enjoy stereo effects, two or more speaker systems are used in the car. A multi-speaker system does not combine speakers with the same characteristics but instead reproduces the optimal frequency range of each speaker, eliminating unwanted frequencies. 4. Amplifier: The amplifier boosts the voltage and power of the program signals to drive the speakers and produce sound.
118
Share

What Are the Causes of High Engine Coolant Temperature in Cars?

Possible causes include insufficient coolant, radiator leakage, or cooling fan malfunction. Below are the reasons for high engine coolant temperature: 1. Insufficient Coolant: Prolonged water circulation during engine operation can gradually deplete the coolant in the engine's cooling system, leading to radiator fluid shortage. If the owner fails to promptly inspect, identify, and replenish the coolant, it can easily result in elevated engine coolant temperature. 2. Radiator Leakage: Broken or poorly connected radiator hoses can cause leaks, obstructing water circulation. In severe cases, this may cause the engine to "boil over," manifesting as white smoke emission. 3. Cooling Fan Malfunction: A damaged cooling fan or electrical short circuit may prevent the fan from operating or cause it to rotate slowly, hindering heat dissipation from the engine and naturally raising the engine's coolant temperature.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.