Does the Envision come with a panoramic sunroof?

3 Answers
LeTeagan
07/30/25 2:58am
The Envision comes with a panoramic sunroof, which has a relatively large area and can even feature an entire glass roof. Currently, most panoramic sunroofs consist of two separate pieces of glass at the front and rear. It is advisable to avoid using the sunroof on bumpy roads to prevent damage to the sunroof and its sliding rail components due to vibration. The Envision's body dimensions are 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. The Envision offers two engine options: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine delivers a maximum horsepower of 169 hp, a maximum power of 124 kW, and a maximum torque of 250 Nm. The 2.0-liter turbocharged engine provides a maximum horsepower of 260 hp, a maximum power of 191 kW, and a maximum torque of 400 Nm.
Was this review help?
19
4
Share
StJocelyn
08/16/25 9:21am
As a long-time Buick owner, the Envision does indeed come with a panoramic sunroof version, and the daylight opening area is quite large! However, it depends on the specific year and trim. For example, the 2023 Envision S GS model I bought for my daughter last year features a fully transparent roof, with the front section completely retractable. But the entry-level 552T trim only has a standard small sunroof. I recommend checking the official website’s configuration sheet before viewing the car—only models labeled with 'openable panoramic sunroof' offer the true starlit roof experience. The larger the sunroof, the more attention maintenance requires; I clean the leaves from the tracks every quarter.
Was this review help?
16
4
Share
Expand All
StAubrey
10/22/25 2:40am
Recently, while accompanying a friend for a test drive of the Envision, I paid special attention to the sunroof. The salesperson mentioned that the 2024 model has been upgraded across the entire lineup, with even the most affordable 25T trim now featuring an electric panoramic sunroof, complete with UV-protective glass coating. However, the mid-range and top-tier trims offer a larger sunroof opening area, especially the Avenir version, which includes starlight ambient lighting. During the actual test, I noticed the sunshade is quite thick, preventing any scalp sunburn in summer. My friend ultimately chose the version with the Hummingbird chassis, and the sunroof controls are conveniently located next to the reading lights, making operation very smooth.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What Can You Put in Your Car to Repel Mosquitoes?

You can choose the following methods to repel mosquitoes in your car: 1. Spray mosquito repellent: Choose odorless or lightly scented options with minimal side effects. 2. Place mosquito-repellent sachets: These sachets contain herbs such as honeysuckle, mugwort, cloves, mint, patchouli, and perilla leaves, whose traditional Chinese medicinal scents effectively repel mosquitoes. 3. Place orange peels: Mosquitoes dislike the scent of orange peels, which not only repels them but also eliminates odors. Here are some additional tips for removing odors from your car: 1. Activated charcoal for odor removal: Activated charcoal has abundant capillaries with strong adsorption properties. When toxic gases in the air come into contact with activated charcoal, they are adsorbed onto these capillaries, purifying the air. 2. Vinegar odor removal method: New car odors often signal air pollution inside the vehicle, possibly due to the release of harmful substances like formaldehyde and benzene. When not using the car, place a small bucket of water mixed with vinegar inside. Repeat this several times, and the odor will gradually disappear. Water can adsorb formaldehyde, while vinegar stabilizes it. 3. Fruit odor removal method: Place a few lemons or pineapples in the car. If sliced, the fruit fragrance will volatilize better, helping to neutralize odors.
15
2
Share

Where is the battery located in the Dodge Journey?

The battery of the Dodge Journey is located on the left side of the vehicle, within the engine compartment. You can remove the front wheel and take off the front fender to find the battery. There are currently 5 models of the Dodge Journey available for sale, featuring 3 different engine displacements: 2.0T, 2.4L, and 3.6L, with 1 type of transmission option (manual/automatic). The engine delivers a maximum power of 206.0kW, maximum horsepower of 280PS, and maximum torque of 350.0N·m. More details about the Dodge Journey are as follows: 1. The Dodge Journey combines the comfort and spaciousness of a family MPV with the driving performance and dynamism of an SUV. It has received the highest safety rating from the Insurance Institute for Highway Safety (IIHS) and features seven best-in-class attributes, including the only integrated child safety seat in its segment, redefining the value benchmark for large 7-seater luxury crossover SUVs. 2. As a pure American vehicle, the Dodge Journey's safety is unquestionable. Its unique reinforced structural safety body comprises 36% of the total weight in hot-stamped and high-strength steel, optimizing body weight while significantly enhancing strength. It has earned the highest 5-star safety rating from the European New Car Assessment Programme (E-NCAP) and the top evaluation from the Insurance Institute for Highway Safety (IIHS).
7
5
Share

Can the clutch be fully released in Subject 2 driving test?

In the Subject 2 driving test, the clutch cannot be fully released during maneuvers such as reversing into a garage, parallel parking, S-curve driving, starting on a slope, or making a right-angle turn. While the clutch can be released when moving between these test areas, it is still necessary to control the vehicle speed. Below are relevant introductions about Subject 2: Introduction 1: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skills test. For small vehicles (C1/C2), the test items include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (commonly known as S-curve). Introduction 2: For large vehicles (A1/A2/A3/B1/B2), the test items include stake test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, curve driving, and right-angle turns. Introduction 3: Other test items include passing through a limited-width gate, navigating continuous obstacles, driving on bumpy roads, making U-turns on narrow roads, as well as simulations of highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling.
8
5
Share

How to Reduce a Car's Drag Coefficient?

Methods to reduce a car's drag coefficient include: 1. Using appropriate curved transitions for various parts of the car body, minimizing protruding attachments, appropriately inclining the front face, engine hood, and windshield backward, and designing the rear window and roof length and angle suitably. 2. Additionally, installing deflectors or spoilers in appropriate locations can help. By studying the airflow patterns around the car, not only can a more rational body structure be designed, but airflow can also be cleverly guided to reduce the drag coefficient by utilizing local airflow effects. More details are as follows: 1. The car's drag coefficient is a concept based on the overall structure of the vehicle. The optimal geometric parameters for one model may not apply to another, as even a small modification can significantly impact the whole, illustrating the principle that 'a slight move in one part can affect the whole situation.' Data in technical books are results obtained under strictly defined test conditions for specific car ranges. 2. Airflow passing through the car's interior also contributes to driving resistance. Research indicates that the commonly referred-to drag mostly stems from the interaction between the car's exterior and airflow. 3. In reality, the resistance acting on a car consists of five components: the pressure drag, which is the difference between the positive pressure at the front and the negative pressure at the rear, accounting for about 58% of total air resistance; the interference drag, caused by protruding parts like bumpers, mirrors, front license plates, drainage grooves, and chassis transmission mechanisms, accounting for about 14%; the internal resistance, caused by ventilation and engine cooling airflow, accounting for about 12%; and the lift-induced resistance from high-speed driving, accounting for about 7%.
3
2
Share

What is the refrigerant charging capacity for the Audi A6L?

Approximately 650g. Below is relevant information about the 2021 Audi A6L: 1. Network introduction: The new A6L comes standard with Audi connect services. Upon purchase, the owner will receive a SIM card to be inserted into the entertainment system computer. When searching for WiFi with a phone, a wireless hotspot named after the last four digits of the vehicle identification number (VIN) will appear. Adjusting the vehicle display to the playback source interface will reveal the password. 2. Vehicle overview: The 2021 Audi A6L adds features such as a hands-free trunk lid, keyless entry for the entire vehicle, Type-C ports, and multi-color ambient lighting. The dimensions are 5038 mm in length, 1886 mm in width, 1475 mm in height, with a wheelbase of 3024 mm.
12
1
Share

Why is the urea pump silent after a China V vehicle is turned off?

If the urea pump does not make any sound after the engine is turned off, it indicates that the pump is damaged. Below are specific details about the urea pump: 1. Introduction: The urea pump is a crucial component of the urea solution injection metering system. Its primary function is to extract urea solution from the urea tank, maintain a certain pressure, and then deliver it to the injection unit to meet the flow and pressure requirements of the injection metering system. 2. Composition and Principle: It mainly consists of a motor, supply pump, reverse pump, switch valve, pressure chamber, throttle orifice, etc. The pump operates in two states: supply and emptying. When supplying liquid to the urea injection system, the motor drives the supply pump to transport urea solution from the urea tank to the pressure chamber. A portion of the urea solution is used for injection, while another portion flows back to the urea tank through the throttle orifice.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.