Does the Envision come standard with a fire extinguisher?

Should the Changan Yidong Plus use 92 or 95 octane gasoline?

According to the official vehicle manual recommendation, the Changan Yidong Plus should use 92 octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual for the Changan Yidong Plus, you can also find it on the fuel tank cap, which will also be marked. Usually, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should choose 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should opt for 95 octane gasoline. However, with the use of some new technologies nowadays, the gasoline grade cannot be solely determined by the compression ratio. A high compression ratio can also be tuned to use lower-grade gasoline. This is because, apart from the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Changan Yidong Plus occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-grade gasoline, mistakenly using higher-grade gasoline will not cause damage, but the increase in octane number will change the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced in real feedback. For vehicles recommended to use higher-grade gasoline, using lower-grade gasoline can cause engine knocking. Because the octane number is too low, the gasoline's ignition point decreases and may ignite prematurely during the compression stroke. If combustion occurs before the spark plug ignites during the compression stroke, resistance will arise during the upward stroke. This resistance makes the engine run very unstably. If it's mild knocking, it only increases noise without significant damage to the engine. However, if there is noticeable knocking, it indicates severe engine conditions. The vibration not only affects driving stability but also causes abnormal wear on the pistons and cylinders, and in severe cases, can lead to cylinder scoring.

15

4

Share

Where to Get a CNG Tank Inspection for Vehicles?

Vehicle CNG tank inspections can be conducted at Special Equipment Inspection Research Institutes or authorized inspection stations approved by the local vehicle management office in the vehicle's registered location. For the inspection, you need to bring the following documents: the gas tank usage registration certificate issued during the fuel conversion, the gas tank factory qualification certificate, the gas tank installation supervision inspection certificate, the vehicle's driving license, and the owner's ID card. A gas cylinder refers to a mobile pressure vessel that can be refilled and used repeatedly under normal ambient temperatures (-40°C to 60°C), with a nominal working pressure equal to or greater than 0.2MPa (gauge pressure), and a product of pressure and volume equal to or greater than 1.0MPa·L, used for storing gases, liquefied gases, and liquids with a standard boiling point equal to or below 60°C. According to the "Gas Cylinder Safety Technical Regulations" regarding periodic inspections of gas cylinders, the inspection cycle for vehicle compressed natural gas (CNG) cylinders is 3 years. Inspection agencies may appropriately shorten the inspection cycle based on gas quality and the actual usage condition of the cylinders. As per relevant regulations, vehicles with expired gas tanks cannot pass annual inspections. The regulations also stipulate that vehicle gas cylinders must be scrapped along with the vehicle, with the maximum usage period for CNG cylinders in taxis being 8 years. CNG tank inspection and annual review items include: visual inspection, thread inspection, internal inspection, weight (volume) measurement, pressure test, leak test, cylinder accessory inspection (replacement), non-destructive testing, and mounting device inspection. After the inspection, the inspector must accurately fill out the inspection records and promptly issue the "Gas Cylinder Periodic Inspection Report" for qualified or scrapped cylinders.

15

2

Share

What is the Function of a Car Sunroof?

The function of a car sunroof is to enhance the ventilation inside the vehicle, allowing for rapid cooling and better air circulation. It utilizes the superior principle of negative pressure ventilation to filter the air inside the car, thereby protecting the health of the driver and passengers. Below are detailed explanations of its functions: Rapid Cooling: During summer, after a car has been exposed to the sun, the interior temperature can reach 60-70 degrees Celsius, which is unbearable for most people. The most effective way to cool down quickly is to open the sunroof. When hot and cold air meet, the hot air rises and is expelled through the sunroof. Once the interior temperature has significantly dropped, the sunroof can be closed. Reducing Wind Noise: A large proportion of drivers prefer not to open windows while driving on highways to save fuel. However, what if someone in the car feels motion sickness? Opening the side windows at this time would subject the occupants to annoying noise and strong winds. Instead, opening the sunroof and closing the side windows can utilize the negative pressure effect to ventilate the car without increasing wind resistance, while also reducing noise. Exhausting Fumes: During traffic jams, when all vehicles are stationary or moving slowly, exhaust fumes become more concentrated than usual. Opening the sunroof and closing all side windows at this time prevents exhaust fumes from entering the car. The negative pressure ventilation of the sunroof expels the polluted air from the car, keeping the cabin free from contamination. Preventing Window Fogging: Many car owners tend to keep their car doors and windows tightly closed in winter while using the heater. Over time, the temperature difference between the inside and outside of the car increases, causing the windows to fog up, which affects visibility and driving safety, and can also make people feel drowsy. This problem can be easily solved by slightly opening the sunroof.

1

2

Share

How is the traffic violation code 1005a penalized?

According to the "Road Traffic Safety Law of the People's Republic of China", the penalty for violation code 1005a is as follows: Demerit points (deduction): 0 points; Fine amount: 1000 yuan; Other penalties: May be accompanied by detention for up to 15 days. Violation code 1005a means: Driving a motor vehicle without obtaining a driver's license. A: Driving a non-car motor vehicle without obtaining a driver's license. Traffic violation codes consist of four to five digits, classified according to the general principles of the traffic law. The order from left to right is: the first digit is the behavior classification code, the second digit is the demerit point classification code, the third and fourth digits are the sequential code, and the fifth digit is the item number of the article. First digit: Behavior classification code, indicating the classification code in the Road Traffic Law; Second digit: Demerit point classification code, indicating the classification code for demerit points for traffic violations; Third, fourth, and fifth digits: Sequential code, indicating the sequential code of the behavior within the same behavior classification. For example: 13035—"1" indicates motor vehicle behavior, the second digit "3" indicates 3 demerit points, and the following "035" indicates the fifth item of the third article in the 3-point deduction category. Behavior classification code violation descriptions: Codes starting with 1 indicate motor vehicle traffic, e.g., 1003; Codes starting with 2 indicate non-motor vehicle traffic, e.g., 2002; Codes starting with 3 indicate pedestrian or passenger traffic, e.g., 3030; Codes starting with 4 indicate highway traffic, e.g., 4002; Codes starting with 5 indicate other regulations, e.g., 5005; Codes starting with 7 indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008; Codes starting with 8 indicate local regulations of cities (regions, autonomous prefectures, leagues), e.g., 8606. There are four common methods to query motor vehicle violations: Visit the office halls of traffic branches in various districts and counties to query through touch terminals; Log in to the external service websites of the Public Security Traffic Management Bureau of each city, find the vehicle violation query, enter the license plate number and vehicle engine number, and click to query; Call the inquiry hotline (area code + 114) to query; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For the violation of driving a motor vehicle without obtaining a driver's license (A: Driving a non-car motor vehicle without a license), you can handle it through the Traffic Management app. After logging into the app, enter the violation handling process, complete the handling, and make the payment.

11

4

Share

What are the consequences of mixing power steering fluid with other oils?

Mixing power steering fluid with other oils will accelerate the deterioration of the oil quality and increase mechanical wear during operation, potentially leading to mechanical failures. More information about power steering fluid is as follows: 1. Power steering fluid is a special liquid used in the car's power steering pump. Through hydraulic action, it can make the steering wheel very light. 2. Power steering can automatically provide steering force when the driver is turning, thereby reducing the driver's steering labor intensity. Power steering oil is a medium oil added to the power steering system, which plays the role of transmitting steering force and buffering.

2

1

Share

What does the brake pad warning mean in Audi?

Audi's brake pad warning indicates that the brake pads are excessively worn and should be replaced promptly. The braking system significantly impacts the overall performance of the vehicle, affecting its ability to stop safely after starting, so any issues should be taken seriously. The following details about the brake pad warning: 1. Brake pads are components installed on the cylindrical surface of the car's tires, made of friction materials. 2. If they are excessively worn, they should be replaced immediately. After the warning appears, the car can typically be driven for about 200 kilometers. 3. If the brake discs are too thin and trigger the warning, they should also be replaced to avoid affecting the vehicle's braking system and prevent potential accidents.

3

Share

Does the Envision come standard with a fire extinguisher?

Should the Changan Yidong Plus use 92 or 95 octane gasoline?

Where to Get a CNG Tank Inspection for Vehicles?

What is the Function of a Car Sunroof?

How is the traffic violation code 1005a penalized?

What are the consequences of mixing power steering fluid with other oils?

What does the brake pad warning mean in Audi?

How to Shift When D and S Gears Are Combined?

Where is the first aid kit located in the Audi A6L?

What is the fuel consumption of the Cadillac XT5?

How to Use the Auto Start-Stop Function in the Buick Excelle?