···
Log in / Register

Does the Engine Filter Need to Be Replaced?

3 Answers
LaNolan
07/29/25 6:28pm
The engine filter needs to be replaced, and the engine oil and oil filter should be changed every 5,000 kilometers. The reason is that the performance of the oil filter directly affects the lubrication effect of the engine oil. 1. Replacing the oil filter: Every time the engine oil is changed, a high-quality full-flow oil filter, such as a paper filter element, must be replaced. The replacement cycle for engine oil and oil filter is typically 5,000 kilometers. 2. Replacing new engine oil: If only the engine oil is replaced without changing the oil filter, the old oil and about one-fourth of the contaminants in the old filter will re-enter the oil circulation, not only increasing the risk of wear but also reducing the performance of the new engine oil.
Was this review help?
16
3
Share
VanAmy
08/14/25 11:23am
Yes, the engine air filter absolutely needs regular replacement. It acts like the lungs of the car, filtering out dust and impurities from the air to protect internal engine components. I recommend checking it every 10,000 to 15,000 miles or once a year, depending on driving habits. In dusty environments like construction sites or rural areas, dust accumulates quickly, causing the filter to clog easily. Reduced airflow can lead to decreased engine efficiency, increased fuel consumption, and even engine damage. Checking it is simple: open the hood, remove the filter, and inspect for dirt. If it looks grayish or has hardened debris, it's time for a replacement. Neglecting this could turn minor issues into major ones, such as reduced acceleration or doubled repair costs. I usually replace it myself during routine maintenance—it's easy and ensures the car runs efficiently.
Was this review help?
16
4
Share
Expand All
LaBentley
10/14/25 6:16am
Yes, it definitely needs to be replaced. The engine air filter's function is to purify the incoming air and prevent dust from entering the cylinders. If not replaced, accumulated dirt can clog the filter, impairing airflow and causing incomplete combustion. This may lead to a 10% to 15% increase in fuel consumption and accelerate engine aging. Based on my observation, it's best to replace the filter every 12 to 18 months or approximately 15,000 kilometers, depending on road conditions; frequent stops in urban driving cause faster dust accumulation. During inspection, you can check by hand - if clogging is noticeable, act promptly. The long-term consequence of not replacing it is internal component wear, and repair costs would far exceed the price of a new filter. Replacement is simple, taking just minutes to complete, and can significantly enhance vehicle lifespan and performance.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What does Maintenance A and Maintenance B mean?

A Maintenance and B Maintenance refer to the service codes for vehicle maintenance. A Maintenance is a minor service, while B Maintenance is a major service. Below are the detailed explanations: 1. A Maintenance: A Maintenance, also known as a minor service, typically refers to the basic maintenance tasks performed at the manufacturer's recommended time or mileage intervals to ensure vehicle performance. This mainly includes changing the engine oil and oil filter. During engine operation, metal friction generates debris, and impurities and moisture from the air mix into the oil. Continuous lubrication and high-temperature working conditions cause the oil itself to degrade and lose effectiveness. Similarly, the oil filter's efficiency diminishes over time, so timely replacement is necessary. 2. B Maintenance: B Maintenance is a major service for the vehicle, performed at the manufacturer's recommended time or mileage. In addition to changing the engine oil and oil filter, it includes replacing the air filter, cabin air filter, brake fluid, transmission fluid, and other items. Therefore, B Maintenance includes A Maintenance, and typically, A and B Maintenance are performed alternately. The selection of major maintenance items can be fully referenced according to the vehicle's maintenance manual.
19
2
Share

Is Anti-Skid the Same as ESP?

Anti-skid is part of the ESP system. Below is an introduction to the ESP system: 1. Definition: The ESP system is actually a type of traction control system. Compared to other traction control systems, ESP not only controls the drive wheels but also the non-drive wheels. For example, in rear-wheel-drive cars, oversteering often occurs, where the rear wheels lose control and the car fishtails. In such cases, ESP will brake the outer front wheel to stabilize the car. In cases of understeering, to correct the tracking direction, ESP will brake the inner rear wheel to adjust the driving direction. 2. Function: The ESP system is an important system in a car, typically supporting the functions of ABS and ASR. It analyzes vehicle driving state information from various sensors and then sends correction commands to ABS and ASR to help maintain the vehicle's dynamic balance. ESP can keep the vehicle stable under various conditions, with particularly noticeable effects in cases of oversteering or understeering. ESP generally requires the installation of steering sensors, wheel sensors, skid sensors, and lateral acceleration sensors.
3
5
Share

What Causes the Chassis Noise in Emgrand?

Automobile chassis noise can be attributed to the following reasons: 1. Suspension System: The noise heard when the vehicle starts is usually due to a fault in the suspension system, which may be caused by loose or damaged engine mounts. 2. Steering System and Suspension System: The noise heard when the vehicle is turning may be due to faults in the steering system and suspension system, as the vehicle tilts during the turning process, causing the suspension system to deform and participate in the movement. 3. Brake System Components: The noise heard when the vehicle is driving on good road conditions may be due to faults in the brake system components, or it may be caused by loose or worn brake system components, out-of-round brake drums, or uneven brake disc surfaces. 4. Bearings: It could also be an issue with the bearings that connect the moving and stationary parts of the vehicle. If it is a bearing problem, the driver can identify it by applying slight brakes. If the noise remains unchanged when the vehicle is moving at a constant speed with the brakes applied, then it is a bearing issue.
18
3
Share

What is the actual lifespan of a Hyundai CVT transmission?

There is a reference answer regarding the actual lifespan of a CVT transmission, which is 400,000 kilometers. However, this also depends on driving habits, so it can only serve as a reference. Below is some relevant information about CVT transmissions: 1. The principle of CVT transmissions: They mainly consist of two conical pulleys and a steel belt or chain. The two conical pulleys can be pressed together or released via electro-hydraulic control devices, changing the diameter of the steel belt wrapped around the pulleys to achieve variable transmission ratios. During startup, the driving pulley has the smallest diameter, while the driven pulley has the largest diameter. At high speeds, the driving pulley's diameter increases, and the driven pulley's diameter decreases. The entire diameter-changing process is controlled by a computer, enabling stepless adjustment and continuously variable transmission. 2. Advantages of CVT transmissions: Since CVT transmissions do not have mechanical gears, the driving process is very smooth with almost no noticeable jerking. CVTs have fewer components, only a few hundred, which contributes to their higher reliability.
11
1
Share

Does the dash cam only record when the car is started?

It depends on whether the installed dash cam has a parking monitoring mode. Without this mode, the dash cam naturally cannot record after the car is turned off. Even dash cams with parking monitoring mode will only start recording when necessary. Below is an introduction to parking monitoring dash cams: 1. Dash cams with parking monitoring function: Dash cams with parking monitoring function abandon traditional power sources like cigarette lighters or USB ports, instead using a step-down cable to directly draw power from the ACC fuse box. After the vehicle is parked and turned off, the dash cam will automatically shut down and enter a low-energy sleep mode. However, upon detecting a collision or movement in front, it will immediately wake up and record the surrounding scene. 2. Reducing battery drain: The parking monitoring mode of a dash cam is not always on. Typically, the dash cam uses a step-down cable with low-voltage protection to minimize battery drain as much as possible. After the vehicle is parked and turned off, the dash cam enters a low-energy state. If the car is hit or movement is detected, the system will immediately activate the parking monitoring function and record the monitoring footage.
9
4
Share

How many ring roads can Tianjin license plates enter in Beijing?

Tianjin license plates can enter any ring road in Beijing with a Beijing entry permit. Without the permit, they are only allowed to drive outside the Fifth Ring Road and must comply with Beijing's traffic restrictions. Below is an extended introduction: 1. Time restrictions: On weekdays during morning and evening peak hours (7:00-9:00 and 17:00-20:00), driving on the main roads, auxiliary roads, and roads within the Fifth Ring Road is prohibited. From 9:00 to 17:00 on weekdays, vehicles must adhere to the tail number restriction rules, which are the same as those for Beijing license plates, covering the main roads, auxiliary roads, and roads within the Fifth Ring Road. 2. Entry rules: Outside the Sixth Ring Road, non-local vehicles can enter any ring road in Beijing with a Beijing entry permit. Without the permit, non-local vehicles can only drive outside the Fifth Ring Road. According to Beijing's regulations, non-local vehicles have restricted entry times and are not allowed in designated areas during morning and evening peak hours. Violations will result in fines.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.