Does the Emgrand GL have headlight washers?

2 Answers
VonAriel
07/25/25 3:34am
Emgrand GL does not have headlight washer function. Here is an introduction about headlight washers: 1. Headlight washers refer to a water outlet located below the headlights, which can clean dust and dirt from the headlights at any time. Generally, higher-end models are equipped with this function. 2. During night driving or driving in low-light conditions, rain and dust can reduce the illumination of headlights by 90%, severely affecting the driver's visibility. Headlight washers provide a simple and effective solution to this problem. Many countries have laws requiring the installation of headlight washer systems in vehicles.
Was this review help?
19
1
Share
EmeryDella
08/10/25 5:03pm
Well, to be honest, I've driven the Emgrand GL for a while, and the headlight cleaning function isn't standard. From my experience, it's usually available in higher trim levels, like the Premium or Flagship editions, and requires an optional add-on. This feature is quite useful—it automatically sprays water to clean the headlight covers during rainy or muddy conditions, preventing dim lighting from affecting nighttime driving. However, many regular compact cars on the market now omit this design to cut costs. The Emgrand GL itself offers great value for money, but lacking this feature is normal. I recommend checking the official configuration sheet or user manual when buying a car to confirm. One extra note: cleaning headlights is part of safe driving, so I suggest regularly wiping them manually to maintain brightness and avoid dust obstructing visibility. After all, driving safety comes first, especially in rain or snow.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

Must I wear glasses in my driver's license photo if I am nearsighted?

Nearsighted individuals must wear glasses in their driver's license photos. The requirements for driver's license photos are as follows: 1. No accessories: No colored glasses, scarves, earrings, or other accessories that obscure facial features are allowed. The face should not have obvious distortion, tilting, turning, heavy makeup, or accessories. 2. Photo specifications: The driver's license photo must be a one-inch color photo with a white background, taken within the last 6 months of the applicant. 3. No dyed hair: Hair should not be styled in a bizarre or multi-colored manner. Temporary hair wax should be used to restore hair to a normal appearance if necessary. 4. Clarity: The photo must be clear and recognizable, with no blurring or significant discrepancies in appearance, as this would make it difficult for traffic police to identify the individual, defeating the purpose of having a photo on the driver's license.
14
4
Share

What Are the Differences Between Cast and Forged Car Wheels?

Differences between cast and forged car wheels are reflected in the manufacturing process, cost, and weight. Different Manufacturing Processes: Cast wheels are made by pouring molten aluminum into a sand mold. After cooling and solidifying, they undergo machining (deburring, finishing, polishing) to complete the manufacturing process. Forged wheels, on the other hand, involve placing a heated and softened aluminum block into a steel mold, then using stamping to shape it. After cooling, the wheel undergoes machining to achieve the final product. Different Costs: The casting process is simpler and more straightforward, making it easier for mass production, hence the relatively lower cost. Forging, due to its more complex procedures, results in higher manufacturing costs. Different Weights: During the forging process, the aluminum block undergoes continuous stamping, which makes its molecular structure very dense after forming. This allows the wheel to withstand higher pressure and results in greater mass. Therefore, for the same size and strength, forged wheels are lighter in weight compared to cast wheels.
6
3
Share

What Causes Loose Valve Guide Wear?

Valve guide wear and looseness can be caused by poor lubrication of the valve guide, insufficient interference fit between the valve and valve guide, or a bent valve stem, which can also cause the valve to stick during movement within the guide. Poor Lubrication of Valve Guide: After the valve guide wears out, the clearance between the valve guide and valve stem increases, allowing gasoline to easily leak into the cylinder through the gap from the intake valve. This worsens oil consumption and leads to carbon buildup, which can clog the starting spray hole and make engine starting difficult. It is recommended that owners improve the lubrication of the guide. Insufficient Interference Fit Between Valve and Valve Guide: It is recommended that owners adjust the interference fit. A Bent Valve Stem Can Also Cause the Valve to Stick in the Guide: There is usually a small gap between the valve stem and valve guide to allow the valve stem to move freely within the guide. The valve guide operates at high temperatures with poor lubrication. Typically, valve stems are made of high-graphite cast iron or iron-based powder metallurgy to enhance self-lubricating properties.
2
1
Share

Is an annual review required for a B2 driver's license now?

An annual review is not required for a B2 driver's license if no demerit points have been recorded. The details of the B2 driver's license are as follows: Requirements for obtaining a B2 driver's license: Starting from May 1, 2012 (International Labor Day), the annual review period for holders of large buses, medium buses, heavy trucks, or school bus drivers was changed from once every two years to once every year. Drivers holding A, B, N, or P class licenses, commercial drivers with C class licenses, and drivers over 60 years old must undergo an annual review. Regulations for B2 driver's license: According to the 2021 new regulations, B2 driver's license holders must undergo an annual review within 30 days after the end of each demerit point cycle at the local vehicle management office where the license was issued. However, if no demerit points were accumulated during the cycle, the review for that cycle can be waived.
18
4
Share

What to Do If You Lose Your Mercedes Car Key? Where Can You Get a Replacement?

There are two methods if you lose your Mercedes key: The first is to change the password and get a replacement key. You can go to an auto parts market to find a specialized key replacement store or visit a 4S dealership to get a new key. The second method is to replace the entire car lock, but this is more expensive. Here are some related tips: 1. Smart Key Finder: You can equip your key with a smart key finder, which consists of a locator and a receiver connected via Bluetooth signal. Attach the receiver to your key. When you can't find the key, simply press the locator, and the receiver will emit a sound, helping you locate the key by following the noise. However, this method is only suitable for short-distance key loss or when you have a general idea of where the key might be. 2. Spare Key: Normally, vehicles come with two keys. The spare key should be stored safely and not carried around. If one key is lost, you can use the spare key temporarily. If the key is truly lost, it's recommended to get a new key as soon as possible to prevent vehicle theft.
19
1
Share

What is the lifespan of the Mazda RX8 rotary engine?

With proper use and maintenance, the lifespan of the Mazda RX8's rotary engine is approximately 100,000 kilometers. If not properly maintained or used, this engine can experience wear on the sealing components at the edges of the triangular rotor. Here are some relevant details: 1. Sales situation of the Mazda RX8: First, finding a used Mazda RX8 is as difficult as finding a needle in a haystack. If you do manage to acquire this legendary car, it can be considered a financial investment. Due to its nostalgic value and rarity, the resale price of a used Mazda RX8 in China can reach twice its original price. 2. Engine repair for the Mazda RX8: The sealing of the rotary engine's cylinders relies on structures similar to piston rings. However, because the rotary engine's RPM is twice as high or even higher than that of conventional engines, the sealing mechanisms are prone to wear and typically require a major overhaul every 50,000 kilometers. Currently, there are very few people in China who can or know how to repair rotary engines, and with no available supply of related materials, the repair costs are extremely high.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.